www.makemkv.com

xxpickles wrote: Fri Feb 14, 2025 5:03 am I have an LG Slim WP50NB40-NB50 that I decided to take the plunge and flash. I read several discussions with people with this same drive and went through the steps. I was able to use SDFlasher v1.3.5, and it said that it was successful. MakeMKV drive information also looks correct based on what I have seen others post:

Code: Select all

Drive Information
OS device name: H:
Manufacturer: HL-DT-ST
Product: BD-RE BP50NB40
Revision: 1.00
Serial number: ********************
Firmware date: 2114-09-03 17:32
Bus encryption flags: 17
Highest AACS version: 81

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Original (unpatched)
Firmware version: 1.00
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

However, the drive no longer opens or reads the disc (when manually forcing the drawer open). Is there a step I missed somehow?

MartyMcNuts wrote: Fri Feb 14, 2025 6:25 am I have no idea what steps you are following but they are not the right one's! It looks like you have flashed a very old firmware to your drive. Nowhere do any instructions mention flashing BP50NB40 1.00 firmware to the drive!!

The correct procedure is provided in detail in the first post of this very thread.

MartyMcNuts wrote: Tue Aug 18, 2020 1:39 am Hi everyone,

I have created a windows GUI for the MakeMKV sdftool command line flasher. The appearance (and use) is similar to the modifed ASUS flasher, which should make it a bit easier for those that are unsure about using the command line. The latest version is v1.3.5.
...
PS: For your convenience, here are the firmware files to recover the old LG/ASUS drives:


DE_LG_WH16NS40_1.01.bin.zip

DE_ASUS_BW-16D1HT_1.01.bin.zip


BP50NB40-NB40 1.00 viewtopic.php?p=129930#p129930


Enjoy!!

MartyMcNuts wrote: Fri Feb 14, 2025 6:25 am I have no idea what steps you are following but they are not the right one's! It looks like you have flashed a very old firmware to your drive. Nowhere do any instructions mention flashing BP50NB40 1.00 firmware to the drive!!

The correct procedure is provided in detail in the first post of this very thread.

Drive Information
OS device name: H:
Manufacturer: HL-DT-ST
Product: BD-RE WP50NB40
Revision: 1.03
Serial number: ***********************
Firmware date: 2120-05-07 09:29
Bus encryption flags: 17
Highest AACS version: 81

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.03
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

xxpickles wrote: Fri Feb 14, 2025 3:05 pm

MartyMcNuts wrote: Fri Feb 14, 2025 6:25 am I have no idea what steps you are following but they are not the right one's! It looks like you have flashed a very old firmware to your drive. Nowhere do any instructions mention flashing BP50NB40 1.00 firmware to the drive!!

The correct procedure is provided in detail in the first post of this very thread.

It was a separate thread that was specific to the drive I have. Looking at it now, it was also using an older version of the SDFlasher program and a couple of years old at this point.

I went back through the instructions and tried again. The drive opens and attempts to read the UHD disc, but it still shows that there is no disc. It did read a Blu-ray disc with no issues.

Code: Select all

Drive Information
OS device name: H:
Manufacturer: HL-DT-ST
Product: BD-RE WP50NB40
Revision: 1.03
Serial number: ***********************
Firmware date: 2120-05-07 09:29
Bus encryption flags: 17
Highest AACS version: 81

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.03
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

Billycar11 wrote: Fri Feb 14, 2025 8:10 pm You have to be on bp60 fw or bu40n see guide for flashing sequence below

geminikanon wrote: Sat Feb 15, 2025 7:31 am How can I make that my unit read UHD discs? I have already followed the steps as indicated in the guide.

the flashing is done and the firmware is changed but the unit is left in a state where the tray does not open,

I must restore it with the firmware BP50NB40-NB40-1.00-Clean.bin to make it work again.

I try to update with the official application, it show a message that the SVC code is different and does not allow me.

Any help or suggestions would be greatly appreciated.

MartyMcNuts wrote: Sat Feb 15, 2025 10:54 pm

geminikanon wrote: Sat Feb 15, 2025 7:31 am How can I make that my unit read UHD discs? I have already followed the steps as indicated in the guide.

the flashing is done and the firmware is changed but the unit is left in a state where the tray does not open,

I must restore it with the firmware BP50NB40-NB40-1.00-Clean.bin to make it work again.

I try to update with the official application, it show a message that the SVC code is different and does not allow me.

Any help or suggestions would be greatly appreciated.

Why are you using that old flasher from years ago?? I'm not sure what instructions you are following but they must be very old for yhou to be using that.

Why not follow the instrucitons in the first post of this very thread??

geminikanon wrote: Sun Feb 16, 2025 7:28 am

MartyMcNuts wrote: Sat Feb 15, 2025 10:54 pm

geminikanon wrote: Sat Feb 15, 2025 7:31 am How can I make that my unit read UHD discs? I have already followed the steps as indicated in the guide.

the flashing is done and the firmware is changed but the unit is left in a state where the tray does not open,

I must restore it with the firmware BP50NB40-NB40-1.00-Clean.bin to make it work again.

I try to update with the official application, it show a message that the SVC code is different and does not allow me.

Any help or suggestions would be greatly appreciated.

Why are you using that old flasher from years ago?? I'm not sure what instructions you are following but they must be very old for yhou to be using that.

Why not follow the instrucitons in the first post of this very thread??

I followed the instructions step by step using SDFtool flasher v1.3.5, and only get that my unit remain unusable, the tray don't open

beancounter wrote: Mon Feb 17, 2025 11:55 pm Hello. Senior newbie having trouble with flashing my new WP50NB40 drive. Tried to flash it. No luck.
Tried to follow instructions to repair in other messages, no luck. Here is where my drive is now:

Drive Information

OS device name: D:
Manufacturer: HL-DT-ST
Product: BD-RE BP50NB40
Revision: 1.03
Serial number:
Firmware date: 2120-05-07 09:17
Bus encryption flags: 17

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.03

DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes
No disc inserted

The drive opens, but does not recognize my 4k copy of North By Northwest.

Please have pity on this old man trying to get a Plex server populated. Thanks so much.

Greenleaf wrote: Fri Feb 21, 2025 6:49 am Hello,

I just wanted to thank you for this tool. I was able to flash my Asus BW-16D1X-U that I bought on 02-17-25. It came with firmware revision A105. I was able to flash it to revision 3.10.

Here is a link to the unit I bought

BW-16D1HT on any Firmware directly to > Asus BW-16D1HT 3.10MK

I went with the Asus .bin file from the "all you need firmware pack" -> ASUS-BW-16D1HT-3.10-WM01601-211901041014

Your awesome tool

Also, thank you for the visual aid (GIF) you provided for us. It was very helpful for a dummy like me haha

Thank you!