Buffalo BRXL-PUS6U3B

[BlueChicken9889]

i dont think so i have flashed some of the ones that show 1.05 no longer the BN fw
im leaning towards power issue plug in to higher power ports or a powered usb hub

i have tried plugging it into different ports and a powered usb hub, neither changed the results. nothing shows up in the log window. the drive will spin but never successfully reads the disk. makemkv doesnt show anything after that, just says no disc inserted. i have also tried different UHD discs thinking maybe the one i was trying was bad but that didnt change anything either

Does the UHD disc show in Windows explorer?

No it doesnt even show there. did try it with a normal blu ray as well and that did show up

[Billycar11]

No it doesnt even show there. did try it with a normal blu ray as well and that did show up

is the light on top red sometimes?

also always let the os see the disc then open makemkv never open makemkv and then put a disc in

[BlueChicken9889]

No it doesnt even show there. did try it with a normal blu ray as well and that did show up

is the light on top red sometimes?

also always let the os see the disc then open makemkv never open makemkv and then put a disc in

i have only seen the light on top red when i was messing the the power, never when a disc has been in there. i tried letting the os see it then opening makemkv but that didnt help either. i took a video of it so you could hopefully hear the drive, dont know if it will help, i posted it on reddit and tagged you in the comment

[Billycar11]

No it doesnt even show there. did try it with a normal blu ray as well and that did show up

is the light on top red sometimes?

also always let the os see the disc then open makemkv never open makemkv and then put a disc in

i have only seen the light on top red when i was messing the the power, never when a disc has been in there. i tried letting the os see it then opening makemkv but that didnt help either. i took a video of it so you could hopefully hear the drive, dont know if it will help, i posted it on reddit and tagged you in the comment

https://www.reddit.com/r/makemkv/s/eTKxkYTqAs

ok i would try cleaning the discs and lasers
and if that dont work reflash it to bu40n 1.00 with bootloader

[BlueChicken9889]

is the light on top red sometimes?

also always let the os see the disc then open makemkv never open makemkv and then put a disc in

i have only seen the light on top red when i was messing the the power, never when a disc has been in there. i tried letting the os see it then opening makemkv but that didnt help either. i took a video of it so you could hopefully hear the drive, dont know if it will help, i posted it on reddit and tagged you in the comment

https://www.reddit.com/r/makemkv/s/eTKxkYTqAs

ok i would try cleaning the discs and lasers
and if that dont work reflash it to bu40n 1.00 with bootloader

ok this is probably a stupid question but what do you mean with bootloader?

[Billycar11]

i have only seen the light on top red when i was messing the the power, never when a disc has been in there. i tried letting the os see it then opening makemkv but that didnt help either. i took a video of it so you could hopefully hear the drive, dont know if it will help, i posted it on reddit and tagged you in the comment

https://www.reddit.com/r/makemkv/s/eTKxkYTqAs

ok i would try cleaning the discs and lasers
and if that dont work reflash it to bu40n 1.00 with bootloader

ok this is probably a stupid question but what do you mean with bootloader?

the full command if using cli or if using martys tool the include bootloader button

[BlueChicken9889]

https://www.reddit.com/r/makemkv/s/eTKxkYTqAs

ok i would try cleaning the discs and lasers
and if that dont work reflash it to bu40n 1.00 with bootloader

ok this is probably a stupid question but what do you mean with bootloader?

the full command if using cli or if using martys tool the include bootloader button

i tried reflashing to bu40n 1.00 with a bootloader. did it using martys flasher and software he provided, did not work. ill try cleaning the laser tomorrow.

[timjohnson408]

I'm curious how this goes. I just got the same drive with the same 1.05 firmware that you had, but I haven't tried flashing it yet.