BD or UHD no longer work

Please post here for issues related to Blu-ray discs
Post Reply
Chipless
Posts: 17
Joined: Sun Jul 15, 2018 12:30 am

Re: BD or UHD no longer work

Post by Chipless »

My streak of unluckiness continues. Still cannot backup any discs, code string is:

DEBUG: Code 03DF/02/E064BA3E3F81

And then the program has a fatal error and only thing I can do is close it.
jayeroff
Posts: 13
Joined: Mon Jan 28, 2019 5:55 pm

Re: BD or UHD no longer work

Post by jayeroff »

No longer working for me either.

DEBUG: Code 03DF/02/F0ED16432FAA
jayeroff
Posts: 13
Joined: Mon Jan 28, 2019 5:55 pm

Re: BD or UHD no longer work

Post by jayeroff »

I'm unable to rip BD or UHD. Problem started over the weekend, and still not working today.

DEBUG: Code 03DF/02/F0ED16432FAA
xmenw
Posts: 60
Joined: Tue May 15, 2018 2:27 pm

Re: BD or UHD no longer work

Post by xmenw »

Movie A Simple Favor (triple layer ~85gb)
DEBUG: Code 03DF/02/62194E19F4EC

Drive Information
OS device name: H:
Manufacturer: HL-DT-ST
Product: BD-RE WH16NS40
Revision: 1.02
Firmware date: 2117-03-10 16:50
Bus encryption flags: 17
Highest AACS version: 66
jdunbar
Posts: 4
Joined: Mon Jan 28, 2019 6:31 pm

Re: BD or UHD no longer work

Post by jdunbar »

I still can't use Makemkv on bluray discs. It just hangs forever.

MakeMKV v1.14.2 win(x64-release) started
Using direct disc access mode
DEBUG: Code 03DF/02/76A0C3CD522E
Evo01
Posts: 2
Joined: Wed Dec 19, 2018 3:10 am

Re: BD or UHD no longer work

Post by Evo01 »

DEBUG: Code 03DF/02/62194E19F4EC

Drive Information
OS device name: I:
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE WH16NS40
Revision: 1.02
Firmware date: 2117-03-10 16:50
Bus encryption flags: 17
Highest AACS version: 65

Disc Information
Label: JOHN_WICK_CHAPTER_2
Timestamp: 2017-04-24 20:54:57
Data capacity: 46.48 Gb
Disc type: BD-ROM
Number of layers: 2
Channel bit length: 74,5 nm (25.0 GB max. per layer)
Bus encryption flags: 80
jdunbar
Posts: 4
Joined: Mon Jan 28, 2019 6:31 pm

Re: BD or UHD no longer work

Post by jdunbar »

I still can't use Makemkv on Stargate Continuum bluray. It just hangs forever.

MakeMKV v1.14.2 win(x64-release) started
Using direct disc access mode
DEBUG: Code 03DF/02/76A0C3CD522E
ElJimador
Posts: 15
Joined: Sat Feb 09, 2013 3:49 pm

Re: BD or UHD no longer work

Post by ElJimador »

Another victim...

Using direct disc access mode
DEBUG: Code 03DF/02/F0ED16432FAA

Drive Information
OS device name: F:
Manufacturer: ASUS
Product: BW-16D1HT
Revision: 3.00
Serial number: SIK9FH1LF483
Firmware date: 2115-11-03 11:10
Bus encryption flags: 1F
Highest AACS version: 66
cyperous
Posts: 20
Joined: Sat Dec 08, 2018 11:01 pm

Re: BD or UHD no longer work

Post by cyperous »

I started getting this a few days ago.

It would normally print DEBUG: Code 03DF on hundreds of UHD rips and BD rips.
then it would go directly into a rip without issues, no hanging.

I haven't changed anything and now it's printing DEBUG: Code 03DF/02/62194E19F4EC and it just hangs, the first time it did this it started ripping a few minutes later. Now it's just failing.

Drive: HL-DT-ST BD-REWH16NS40 1.02 Internal (SATA)
OS: Windows and Linux (Ubuntu)

I'm using AnyDVD until this is all sorted out.
Last edited by cyperous on Mon Jan 28, 2019 9:53 pm, edited 1 time in total.
BlueMac77
Posts: 111
Joined: Fri Jul 13, 2018 10:49 pm
Contact:

Re: BD or UHD no longer work

Post by BlueMac77 »

So far working fine here on ripping blu-rays before or after the DEBUG: code 03DF announcement. On a Mac OS Mavericks, 2 versions of MakeMKV installed, v1.12.2 and v1.14.1 versions. I haven’t tried MMKV v1.14.2 yet. Using 3 Pioneer BD drives alternately.

Pioneer BDR-207 DBK connected externally via USB 3.0
Pioneer BDR-2209 UBK connected externally via Firewire 400
Pioneer BDR-211 UBK internal

I seldom use Windows 7 installed in my Mac but tested ripping blu-rays and works fine using MakeMKV v1.14.0 on a Pioneer BDR-207 via USB 2.0
cyperous
Posts: 20
Joined: Sat Dec 08, 2018 11:01 pm

Re: BD or UHD no longer work

Post by cyperous »

Reply to my existing post.
HL-DT-ST BD-REWH16NS40 1.02 Internal (SATA)
piyama
Posts: 1
Joined: Mon Jan 28, 2019 8:07 pm

Re: BD or UHD no longer work

Post by piyama »

I'm having the following error when I attempt to open a disc

DEBUG: Code 03DF/02/5568F5F3382A

disc is Freaks and Geeks DVD disc 1
GazzaC
Posts: 7
Joined: Thu May 03, 2018 6:41 pm

Re: BD or UHD no longer work

Post by GazzaC »

Alas, still no joy for me. Internal drive too so no USB to muddy the waters, will leave the drive hunting to see if it eventually does anything useful :cry: ....been 15 mins and counting...after 30 mins I gave up. Another reboot required to get the system working properly.

Only slight difference from yesterday (apart from the DEBUG code displaying) is that its now hanging on parsing file :/AACS/MKB_RO.inf

Manufacturer: ASUS
Product: BW-16D1HT
Revision: 3.01

MakeMKV v1.14.2 win(x64-release) started
Backing up disc into folder "E:/4K/JWFK_UPK1"
Evaluation version, 30 day(s) out of 30 remaining
Downloading latest SDF to C:\Users\Media/.MakeMKV ...
DEBUG: Code 03DF/02/E064BA3E3F81
eriksdam
Posts: 2
Joined: Thu Dec 13, 2018 9:42 am

Re: BD or UHD no longer work

Post by eriksdam »

Same issue.
Stuck at :/AACS/MKB_RO.inf...

Win 10, ASUS BW-16D1HT

- Erik
[rab]
Posts: 8
Joined: Sun Jan 27, 2019 4:07 pm

Re: BD or UHD no longer work

Post by [rab] »

The most recent attempt to open a BD with my Topelek USB 3.0 external reader/writer has been running for over 21 hrs and throwing timeout errors, so i don't have the AACS dump log to give yet until it finally fails and writes to that folder.

Code: Select all

MakeMKV v1.14.2 win(x64-release) started
Using direct disc access mode
Evaluation version, 28 day(s) out of 30 remaining
Downloading latest SDF to C:\Users\alex/.MakeMKV ...
DEBUG: Code 03DF/02/08300AB0DD2E
Error 'OS error - {Device Timeout} The specified I/O operation on hs was not completed before the time-out period expired' occurred while reading '/BDMV/STREAM/00800.m2ts' at offset '22115880960'
It goes on that way for quite a long time (as you can imagine from running for so long and throwing errors).
Post Reply