Just Errors with New 1.12

Please post here for issues related to UHD discs
TeddyRaspin
Posts: 201
Joined: Thu Dec 28, 2017 1:41 pm

Re: Just Errors with New 1.12

Post by TeddyRaspin »

I've sent you a valid dump (3.02 ASUS based) which should fix your MakeMKV issues. :wink:
Dabruce
Posts: 25
Joined: Thu Feb 08, 2018 8:57 pm

Re: Just Errors with New 1.12

Post by Dabruce »

Oh my god... My hands were shaking while flasing, hard to hit the right keys on keyboard :lol:
Erasing and flashing worked fine.
Now testing 1st disc with makemkv...
Asus Drive is detected, cant believe it... :shock: :shock: :D

And thaaaaank you so much
(if it works) ;)
TeddyRaspin
Posts: 201
Joined: Thu Dec 28, 2017 1:41 pm

Re: Just Errors with New 1.12

Post by TeddyRaspin »

Fingers crossed. :D
Dabruce
Posts: 25
Joined: Thu Feb 08, 2018 8:57 pm

Re: Just Errors with New 1.12

Post by Dabruce »

Oh nooo, dropped Read Rate from 24 K/s to 0.8 K/s...at about 50% :shock: :shock:
DavVador
Posts: 16
Joined: Fri Jan 19, 2018 6:56 pm

Re: Just Errors with New 1.12

Post by DavVador »

I'm curious to read the ending, i'm experiencing some read errors randomly on some batman discs aswell (other, more than 20, uhds just read fine).
I finally manage to make a full backup decrypted with MakeMkv after several tries, but those discs seems harder to read.
I have same drive, LG BH16NS55 1.02 and asked Amazon a new set for the batman trilogy.
New set gave me same random errors and it's the same for MakeMkv 1.10 to 1.12.
Dabruce
Posts: 25
Joined: Thu Feb 08, 2018 8:57 pm

Re: Just Errors with New 1.12

Post by Dabruce »

I canceled copying, read rate dropped to 0.4

Here what was written by makemkv:
Error 'Scsi error - MEDIUM ERROR:L-EC UNCORRECTABLE ERROR' occurred while reading '/BDMV/STREAM/00069.m2ts' at offset '3168595968'
Error 'OS error - STATUS_DEVICE_DATA_ERROR' occurred while reading '\Device\CdRom3' at offset '3168595968'
DEBUG: Code 3221225628 at C_m{Jl(SMIM't4IQ#J:121262969
Error 'Internal error - Operation was cancelled (112)' occurred while reading '/BDMV/STREAM/00069.m2ts' at offset '3168595968'
DEBUG: Code 0 at ^hS#m?*~JF`p$)8n]fdk:29395034
DEBUG: Code 0 at MmP0(1kveV2Su6&ru<ie:29394045
DEBUG: Code 0 at ^hS#m?*~JF`p$)8n]fdk:121262647
DEBUG: Code 1547166 at ^hS#m?*~JF`p$)8n]fdk:213129593
DEBUG: Code 0 at B^KyOK*,W)*2d1HZ>vN;<:29399197
DEBUG: Code 0 at B^KyOK*,W)*2d1HZ>vN;<:29399197
LIBMKV_TRACE: Exception: Error in p->FetchFrames(1,false)
Failed to save title 1 to file D://The_Martian_-_Extended_Edition_t01.mkv

Now trying AnyDVD again...
TeddyRaspin
Posts: 201
Joined: Thu Dec 28, 2017 1:41 pm

Re: Just Errors with New 1.12

Post by TeddyRaspin »

Dabruce wrote:Oh nooo, dropped Read Rate from 24 K/s to 0.8 K/s...at about 50% :shock: :shock:
Sometimes it does the same to me, but you have to let it go and after 1-2 mins it will start to increase speed again.

Anyway I'm doing some tests with other firmwares, if I find the best for you, I'll keep you updated.
Dabruce
Posts: 25
Joined: Thu Feb 08, 2018 8:57 pm

Re: Just Errors with New 1.12

Post by Dabruce »

I waited TEN minutes...
TeddyRaspin
Posts: 201
Joined: Thu Dec 28, 2017 1:41 pm

Re: Just Errors with New 1.12

Post by TeddyRaspin »

Hold on, I'm going to try another firmware. :wink:
Dabruce
Posts: 25
Joined: Thu Feb 08, 2018 8:57 pm

Re: Just Errors with New 1.12

Post by Dabruce »

What means "trying"???
What are you doing with all that firmwares???
TeddyRaspin
Posts: 201
Joined: Thu Dec 28, 2017 1:41 pm

Re: Just Errors with New 1.12

Post by TeddyRaspin »

I'm ripping same uhd disc you have on my system.

Now I'm using BH16NS55 flashed as ASUS BW-16D1HT 3.00 firmware and MakeMKV 1.12.0 with latest hashed keyfile.
preserve
Posts: 746
Joined: Sun Sep 13, 2015 10:21 pm
Location: Canada

Re: Just Errors with New 1.12

Post by preserve »

Dabruce wrote:Error 'Scsi error - MEDIUM ERROR:L-EC UNCORRECTABLE ERROR' occurred while reading '/BDMV/STREAM/00069.m2ts' at offset '3168595968'
As I said before, the drive is having a problem reading the disc.

If the disc works with AnyDVD, then maybe AnyDVD is ignoring or bypassing the read errors.

Have you tried holding the disc under a bright light such as LED lighting or light from a projector and ensuring that the disc is as clean as possible? I normally ensure discs are perfectly clean from all angles by the bright natural light from the window and that's good enough 99% of the time, but the first time I held up a disc to the light from my projector, I was surprised by how much more I could see on the surface of the disc.
Using: ASUS BW-16D1HT 3.00
Dabruce
Posts: 25
Joined: Thu Feb 08, 2018 8:57 pm

Re: Just Errors with New 1.12

Post by Dabruce »

YOU are one kind of a GENIUS...
Makes me feel to fall down on my knees and thank you for all your time and work ;)

But somehow i still want to.know why it works always fine with anydvd. This makes me crazy...
Dabruce
Posts: 25
Joined: Thu Feb 08, 2018 8:57 pm

Re: Just Errors with New 1.12

Post by Dabruce »

preserve wrote:
Dabruce wrote:Have you tried holding the disc under a bright light such as LED lighting or light from a projector and ensuring that the disc is as clean as possible? I normally ensure discs are perfectly clean from all angles by the bright natural light from the window and that's good enough 99% of the time, but the first time I held up a disc to the light from my projector, I was surprised by how much more I could see on the surface of the disc.
YES, they are almost brand new and perfect clean!!
Dabruce
Posts: 25
Joined: Thu Feb 08, 2018 8:57 pm

Re: Just Errors with New 1.12

Post by Dabruce »

preserve wrote:
Dabruce wrote:If the disc works with AnyDVD, then maybe AnyDVD is ignoring or bypassing the read errors.

Hmmmm, NO, anydvd also stops at read errors...
Post Reply