Looking for an internal UHD drive to add to my desktop and was hoping this would be possible.
Before I crack this open, I wanted to see if anyone had attempted this and if it would be a straight forward process. I know some HDDs would use soldered connectors which made it difficult and don't want to risk damaging the drive. It looks like the drive itself is the LG model.
Possible to shuck Buffalo BRXL-16U3?
-
Billycar11
- Posts: 6443
- Joined: Sun Aug 24, 2014 5:49 am
Re: Possible to shuck Buffalo BRXL-16U3?
yeah its possible its just a standard drive
Buy a drive from the guide and video maker: viewtopic.php?t=17831
UHD Drive Guide: viewtopic.php?t=19634
Auto flash kit $40 Email Billycar5924@gmail.com No attachments
UHD Drive Guide: viewtopic.php?t=19634
Auto flash kit $40 Email Billycar5924@gmail.com No attachments
-
bcrush
- Posts: 11
- Joined: Fri Jan 06, 2023 12:45 pm
Re: Possible to shuck Buffalo BRXL-16U3?
Thanks, that was easy enough.
For anyone reading this hoping to do the same, it's pretty straightforward. There is a screw on the side and another one hidden underneath the product label on the back. Remove those two and you can pry the top of the case apart from the bottom. Then unscrew the two screws on the side of the drive and the drive should slide out with a little force. The SATA cable doesn't have a lot of slack, so it will be tight. From there, just unplug the connectors and you're ready to add it to your PC.
For anyone reading this hoping to do the same, it's pretty straightforward. There is a screw on the side and another one hidden underneath the product label on the back. Remove those two and you can pry the top of the case apart from the bottom. Then unscrew the two screws on the side of the drive and the drive should slide out with a little force. The SATA cable doesn't have a lot of slack, so it will be tight. From there, just unplug the connectors and you're ready to add it to your PC.
-
SBPhotonerd
- Posts: 1
- Joined: Sat Aug 08, 2026 12:27 am
Re: Possible to shuck Buffalo BRXL-16U3?
Has anyone had success installing a shucked Buffalo BRXL-16U3? Mine contained an H+L Hitachi-LG drive, model # BH16NS58 (AXJA3HB), ROM ver.: 1.03, into an OWC Mercury Pro enclosure. The drive powers on, tries to read, then shuts down. Any thoughts? Please and Thank you!
-
nicholfd
- Posts: 392
- Joined: Fri Aug 19, 2011 11:22 pm
Re: Possible to shuck Buffalo BRXL-16U3?
Check & make sure you are using the correct AC adapter for the OWC enclosure...SBPhotonerd wrote: Tue Nov 03, 2026 6:22 pm Has anyone had success installing a shucked Buffalo BRXL-16U3? Mine contained an H+L Hitachi-LG drive, model # BH16NS58 (AXJA3HB), ROM ver.: 1.03, into an OWC Mercury Pro enclosure. The drive powers on, tries to read, then shuts down. Any thoughts? Please and Thank you!
One of the folks who purchased one of these Buffalo units from me got the AC adapter mixed up. He was trying to use a 5V adapter (same barrel plug) with the chassis, when it came with a 12v. It lit up & tried to power on, then powered off. The OWC enclosure requires 12v, just like the factory Buffalo enclosure.
For sale 4K UHD Flashed USB drives:
ASUS Slim, Buffalo Slim, LG Slim,
Buffalo 5 1/4", ASUS 5 1/4",
drives@nicholasfamilycentral.com
ASUS Slim, Buffalo Slim, LG Slim,
Buffalo 5 1/4", ASUS 5 1/4",
drives@nicholasfamilycentral.com
-
gwhitcombe71
- Posts: 82
- Joined: Fri Oct 23, 2026 2:41 am
Re: Possible to shuck Buffalo BRXL-16U3?
nicholfd's right to check the adapter, but worth saying mine actually died from something else entirely... i shucked a BRXL-16U3 into a spare USB caddy a while back and it powered fine, read the tray, then just stopped mid-spin every time, turned out the ribbon connector inside the Buffalo case had a dodgy ping where id been a bit rough prying the lid off. Had to resolder a dry joint on the little board before it was proper reliable. Worth SBPhotonerd giving the drive a once over for any bent pins or hairline cracks round the connector before chasing the power angle too far, these LG drives are a bit delicate coming out of that caddy. Fixed mine with a cheap iron and it still writes BDs fine to this day, touch wood.nicholfd wrote:Check & make sure you are using the correct AC adapter for the OWC enclosure... One of the folks who purchased one of these Buffalo units from me got the AC adapter mixed up.