Unable to rip *some* UHD Bluray disks

The place to discuss linux version of MakeMKV
InTheSpaghett0
Posts: 1
Joined: Fri Oct 18, 2024 6:27 pm

Unable to rip *some* UHD Bluray disks

Post by InTheSpaghett0 »

I've been a makemkv user for about 4 years now, and over that time I've found a bunch of disks that simply won't read. Most can be put down to rotted or scratched disks but I've found that some of the disks, mainly certain 4K ones, just don't mount or read 9 times out of 10 (more on this below).

I started using makemkv with the following drive on Windows 11, but in the last year switched to Arch Linux. My drive is a Verbatim KIAB 43888, which is a Pioneer BD-UD04 under the hood. From what I can tell this doesn't need flashing, though if I'm wrong please to correct me. Info from makemkv below:

Code: Select all

Drive Information
OS device name: /dev/sr0
Current profile: BD-ROM
Manufacturer: PIONEER
Product: BD-RW BDR-UD04
Revision: 1.14
Serial number: DBDL133367WL
Firmware date: 2020-06-15
Bus encryption flags: 1B
Highest AACS version: 82

LibreDrive Information
Status: Enabled
Drive platform: RS8A10
Firmware name: PIONEER BDR-US04
Firmware type: Original (unpatched)
Firmware version: 1.14
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes
Using two recent examples I have ripped The Odyssey 4K Bluray flawlessley, but Wallace & Gromit: Vengeance Most Fowl does not work. It simply refuses to mount and be read. I understand that this isn't necessarily a makemkv issue and probably to do with my setup, but I can't figure out what the problem is. I've used `regionset` to set the region to 2, though I can't seem to change it after-the-fact as it fails if I try region 1 now. Both disks are fresh out of the wrapper from preordering with HMV (International physical media retailer founded in the UK).

Weirdly, the disk *does* sometimes appear to work. On the 1/10 occasion the drive doesn't keep clunking and fail to spin up the disk will be apparently readable by makemkv. I tried once to mount and open the disk in Arch (Dolphin/SDDM/KDE Plasma/Wayland for info, in case that's pertinent for those who know more about Linux than me) and it said I don't have permission to mount and open the drive?

I'll admit that my setup is a bit weird. I use an active optical USB C cable connecting my desktop PC, which is in another room, to my desk. The cable runs between two USB 3.0 hubs, one of which is connected directly to the desktop via its built-in cable. Both hubs are independently powered with their own power bricks. I've also tried to rip these trouble disks using the drive and my LTT Truespec USB C cable directly connected to the PC, with the same unmountable result. I don't think the issue is this USB shenanigans but thought it might be prevalent.

Is there something I'm missing that allows me to mount/rip most 4K Bluray disks, but not others? Are there 4K Bluray disk versions that I need to account for?