Verbatim 43888 Flash Help

Forum for discussions about UHD-capable dives
neotrident
Posts: 1
Joined: Mon Nov 16, 2026 9:26 pm

Verbatim 43888 Flash Help

Post by neotrident »

Long time MakeMKV user and appreciator but never been a flasher in any sense of the word!

I've been reading topics and I'd very much appreciate confirmation that I've read correctly as the drive was expensive and I'm terrified of bricking it. It is an External Verbatim 43888 Slimline Blu-Ray and i will only use it on Windows 11 machines.

Drive Information
OS device name: H:
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.05
Serial number: MO4P9QH2445
Firmware date: 2124-04-23 13:47
Bus encryption flags: 17
Highest AACS version: 77

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959

I could not see my particular firmware revision till this thread viewtopic.php?t=42808, from this and the guide viewtopic.php?t=22896 I should perform the following steps;

1. I have an installer for MakeMKV 1.18.1, do I need to find a 1.18.4 or will this copy do?
2. Install to MakeMKV to default location
3. Download (v1.3.6) of SDFtool Flasher viewtopic.php?t=22896
4. Download Firmware Pack from viewtopic.php?t=22896
5. Plug in Drive, No Disc, Tray Closed
6. WRITE ? DE_LG_BU40N_1.03_MK.bin
7. Do I power down or move straight to 8?
8. WRITE ? DE_LG_BU40N_1.00.bin, Is this necessary if I only use on Win11 as it was mentioned regarding Linux?
9. Test it worked
10. Dance and thank all those who helped!

Have I missed anything?
Billycar11
Posts: 6429
Joined: Sun Aug 24, 2014 5:49 am

Re: Verbatim 43888 Flash Help

Post by Billycar11 »

You got just make sure you use enc
And straight to 8 is ok just power off for a min after flashing
Buy a drive from the guide and video maker: viewtopic.php?t=17831
UHD Drive Guide: viewtopic.php?t=19634
Auto flash kit $40 Email Billycar5924@gmail.com No attachments