Deadpool and Wolverine 4K Failed to open disc

[tumblejunky]

I just got deadpool and wolverine and when trying to open disc to rip get error below. MakeMKV update 1.17.8 I am not sure what is needed for the decryption to work. Any help would be appreciated.
The volume key is unknown for this disc - video can't be decrypted
Failed to open disc

[MrPenguin]

I just got deadpool and wolverine and when trying to open disc to rip get error below. MakeMKV update 1.17.8 I am not sure what is needed for the decryption to work. Any help would be appreciated.

UHD disk? See this thread.

[tumblejunky]

Yes. Sorry. Searched google and didn't see that thread pop up. Got to remember the shitification of search engines.

[SmarmyGRC]

If I need to move this post lmk..

I am having an issue where Windows and MakeMKV don't register the Deadpool and Wolverine 4K disc at all. I just get, "No disc", after the light blinks green a few times and maybe 30 seconds. I'm on MakeMKV v1.17.8 x64.

I know this likely isn't an issue with MakeMKV, but I haven't ever had an issue opening a 4K disc and I just ripped Indiana Jones and the Last Crusade yesterday, and have ripped probably 60 others. I tried adding the latest keydb.cfg to "%USERPROFILE%\.MakeMKV" with no result.

I tried the regular blu-ray and it works as expected. I stuck the 4K disc in my PS5 and it works perfectly. Drive info below, it is a flashed BDR-UD03. Wondering if anyone else is having a similar issue?

Drive Information
OS device name: H:
Manufacturer: PIONEER
Product: BD-RW BDR-UD04
Revision: 1.14
Serial number: [redacted]
Firmware date: 2020-06-15
Bus encryption flags: 1B
Highest AACS version: 81

LibreDrive Information
Status: Enabled
Drive platform: RS8A10
Firmware name: PIONEER BDR-US04
Firmware type: Original (unpatched)
Firmware version: 1.14
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

[MartyMcNuts]

If I need to move this post lmk..

I am having an issue where Windows and MakeMKV don't register the Deadpool and Wolverine 4K disc at all. I just get, "No disc", after the light blinks green a few times and maybe 30 seconds. I'm on MakeMKV v1.17.8 x64.

I know this likely isn't an issue with MakeMKV, but I haven't ever had an issue opening a 4K disc and I just ripped Indiana Jones and the Last Crusade yesterday, and have ripped probably 60 others. I tried adding the latest keydb.cfg to "%USERPROFILE%\.MakeMKV" with no result.

I tried the regular blu-ray and it works as expected. I stuck the 4K disc in my PS5 and it works perfectly. Drive info below, it is a flashed BDR-UD03. Wondering if anyone else is having a similar issue?

Drive Information
OS device name: H:
Manufacturer: PIONEER
Product: BD-RW BDR-UD04
Revision: 1.14
Serial number: [redacted]
Firmware date: 2020-06-15
Bus encryption flags: 1B
Highest AACS version: 81

LibreDrive Information
Status: Enabled
Drive platform: RS8A10
Firmware name: PIONEER BDR-US04
Firmware type: Original (unpatched)
Firmware version: 1.14
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

Start by cleaning the disc.

[SmarmyGRC]

tried that, mild soap, got it shining....still no dice... returning it and getting another copy from a different vendor

Start by cleaning the disc.

[hipchen]

I am having the same issue
I upgraded to the latest version already


Using LibreDrive mode (v06.3 id=E3767A939283)
Using direct disc access mode
Loaded content hash table, will verify integrity of M2TS files.
Saved AACS dump file as C:\Users\Rich/.MakeMKV/MKB20_v77_MARVEL_STUDIOS'_DEADPOOL_AND_WOLVERINE_CF38.tgz
The volume key is unknown for this disc - video can't be decrypted
Failed to open disc

[MartyMcNuts]

I am having the same issue
I upgraded to the latest version already


Using LibreDrive mode (v06.3 id=E3767A939283)
Using direct disc access mode
Loaded content hash table, will verify integrity of M2TS files.
Saved AACS dump file as C:\Users\Rich/.MakeMKV/MKB20_v77_MARVEL_STUDIOS'_DEADPOOL_AND_WOLVERINE_CF38.tgz
The volume key is unknown for this disc - video can't be decrypted
Failed to open disc

The key isn't available yet. Did you email in your dump file?

[MrPenguin]

Saved AACS dump file as C:\Users\Rich/.MakeMKV/MKB20_v77_MARVEL_STUDIOS'_DEADPOOL_AND_WOLVERINE_CF38.tgz

The key isn't available yet. Did you email in your dump file?

I think this is one of the "Deadpool and Wolverine" disks already in KEYDB.cfg.

[Mikeracing]

i have the same cf38 and the latest keydb that i could find didnt work

[SmarmyGRC]

tried that, mild soap, got it shining....still no dice... returning it and getting another copy from a different vendor

Start by cleaning the disc.

Just want to update that with another copy from B&N and a copy of the US steelbook, I am still just getting the message that simply states "No disc". I have ripped another half-dozen or so 4K movies from disc so I'm fairly confident it isn't the drive. I'm getting a copy of the UK release because why not.. lol

[SmarmyGRC]

tried that, mild soap, got it shining....still no dice... returning it and getting another copy from a different vendor

Start by cleaning the disc.

Just want to update that with another copy from B&N and a copy of the US steelbook, I am still just getting the message that simply states "No disc". I have ripped another half-dozen or so 4K movies from disc so I'm fairly confident it isn't the drive. I'm getting a copy of the UK release because why not.. lol

UK version arrived....was recognized and started ripping IMMEDIATELY...crazy...hopefully this helps someone down the road!