Just picked up a USB BD-RW, surprised to see it has such an old firmware. I know this is currently based on RS1XXX, is it possible to update this to something that will support LIbreDrive, or is it just a dead end?
Drive Information
OS device name: /dev/sr0
Current profile: BD-ROM
Manufacturer: PIONEER
Product: BD-RW BDR-TD03
Revision: 1.20
Serial number:
Firmware date: 2011-07-15
Bus encryption flags: 1B
Highest AACS version: 62
LibreDrive Information
Status: Possible, but very unlikely to happen
Drive platform: Pioneer RS1027
Firmware version: ID72
Just picked up a USB BD-RW, surprised to see it has such an old firmware. I know this is currently based on RS1XXX, is it possible to update this to something that will support LIbreDrive, or is it just a dead end?
Drive Information
OS device name: /dev/sr0
Current profile: BD-ROM
Manufacturer: PIONEER
Product: BD-RW BDR-TD03
Revision: 1.20
Serial number:
Firmware date: 2011-07-15
Bus encryption flags: 1B
Highest AACS version: 62
LibreDrive Information
Status: Possible, but very unlikely to happen
Drive platform: Pioneer RS1027
Firmware version: ID72
No disc inserted
Forget about it. Most likely will never get libredrive enabled and even if it does at some point, it will never be able to rip UHD.
Cheers
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG + Others) & DIY Single Drive Flasher (WW): https://uhdenableddrives.com
I have a Pioneer BDR-XS07U drive of Japan model.
Its FW version is 1.00, but the status is "Possible, not yet enabled"...
Can you please tell me what I need to do to enable LibreDrive?
-----------------------------------------------
Drive Information
OS device name: F:
Manufacturer: PIONEER
Product: BD-RW BDR-XS07U
Revision: 1.00
Serial number: SJDLxxxxxxJP
Firmware date: 2019-01-07
Bus encryption flags: 1B
Highest AACS version: 81
LibreDrive Information
Status: Possible, not yet enabled
Drive platform: Pioneer RS8E21
Firmware version: ID69
I have a Pioneer BDR-XS07U drive of Japan model.
Its FW version is 1.00, but the status is "Possible, not yet enabled"...
Can you please tell me what I need to do to enable LibreDrive?
-----------------------------------------------
Drive Information
OS device name: F:
Manufacturer: PIONEER
Product: BD-RW BDR-XS07U
Revision: 1.00
Serial number: SJDLxxxxxxJP
Firmware date: 2019-01-07
Bus encryption flags: 1B
Highest AACS version: 81
LibreDrive Information
Status: Possible, not yet enabled
Drive platform: Pioneer RS8E21
Firmware version: ID69
you could update with an old pioneer updater but do not use a new one
or email me for a flasher
I have a Pioneer BDR-XS07U drive of Japan model.
Its FW version is 1.00, but the status is "Possible, not yet enabled"...
Can you please tell me what I need to do to enable LibreDrive?
-----------------------------------------------
Drive Information
OS device name: F:
Manufacturer: PIONEER
Product: BD-RW BDR-XS07U
Revision: 1.00
Serial number: SJDLxxxxxxJP
Firmware date: 2019-01-07
Bus encryption flags: 1B
Highest AACS version: 81
LibreDrive Information
Status: Possible, not yet enabled
Drive platform: Pioneer RS8E21
Firmware version: ID69
you could update with an old pioneer updater but do not use a new one
or email me for a flasher
Thanks for the quick reply.
From the information in SDF.bin (v8D), I think FW1.01 (ID69) can enable LibreDrive, but the updater I have is only FW1.02 (ID69)...
Can FW1.02 (ID69) enable LibreDrive?
I can also get ID05 versions FW1.01 and FW1.02, but my drive is ID69 so I can't apply them...
I have a Pioneer BDR-XS07U drive of Japan model.
Its FW version is 1.00, but the status is "Possible, not yet enabled"...
Can you please tell me what I need to do to enable LibreDrive?
-----------------------------------------------
Drive Information
OS device name: F:
Manufacturer: PIONEER
Product: BD-RW BDR-XS07U
Revision: 1.00
Serial number: SJDLxxxxxxJP
Firmware date: 2019-01-07
Bus encryption flags: 1B
Highest AACS version: 81
LibreDrive Information
Status: Possible, not yet enabled
Drive platform: Pioneer RS8E21
Firmware version: ID69
you could update with an old pioneer updater but do not use a new one
or email me for a flasher
Thanks for the quick reply.
From the information in SDF.bin (v8D), I think FW1.01 (ID69) can enable LibreDrive, but the updater I have is only FW1.02 (ID69)...
Can FW1.02 (ID69) enable LibreDrive?
I can also get ID05 versions FW1.01 and FW1.02, but my drive is ID69 so I can't apply them...
you could update with an old pioneer updater but do not use a new one
or email me for a flasher
Thanks for the quick reply.
From the information in SDF.bin (v8D), I think FW1.01 (ID69) can enable LibreDrive, but the updater I have is only FW1.02 (ID69)...
Can FW1.02 (ID69) enable LibreDrive?
I can also get ID05 versions FW1.01 and FW1.02, but my drive is ID69 so I can't apply them...
1.01 is what you want
Thank you.
As I thought, I still need 1.01.
But so far I can't find 1.01 on the internet...
Do you know of any site where I can get it?
Or can your flasher solve this problem? If so I will send you an email.
Hello I have this player and it is listed to be good for flashing and decrypting UHD BDs. But I can't find the .bin to flash it.
Thanks for your help
Informations lecteur
Nom du lecteur SE : D:
Fabricant : PIONEER
Produit : BD-RW BDR-UD04
Révision : 1.14
Date micrologiciel : 2020-06-15
Marqueurs d'encryptage bus : 1B
Version AACS la plus haute : 81
LibreDrive Information
Status: Enabled
Drive platform: RS8A10
Firmware name: PIONEER BDR-US04
Firmware type: Original (unpatched)
Firmware version: 1.14
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes
Hello I have this player and it is listed to be good for flashing and decrypting UHD BDs. But I can't find the .bin to flash it.
Thanks for your help
Informations lecteur
Nom du lecteur SE : D:
Fabricant : PIONEER
Produit : BD-RW BDR-UD04
Révision : 1.14
Date micrologiciel : 2020-06-15
Marqueurs d'encryptage bus : 1B
Version AACS la plus haute : 81
LibreDrive Information
Status: Enabled
Drive platform: RS8A10
Firmware name: PIONEER BDR-US04
Firmware type: Original (unpatched)
Firmware version: 1.14
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes
Hello I have this player and it is listed to be good for flashing and decrypting UHD BDs. But I can't find the .bin to flash it.
Thanks for your help
Informations lecteur
Nom du lecteur SE : D:
Fabricant : PIONEER
Produit : BD-RW BDR-UD04
Révision : 1.14
Date micrologiciel : 2020-06-15
Marqueurs d'encryptage bus : 1B
Version AACS la plus haute : 81
LibreDrive Information
Status: Enabled
Drive platform: RS8A10
Firmware name: PIONEER BDR-US04
Firmware type: Original (unpatched)
Firmware version: 1.14
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes