power outage when flashing

[Billycar11]

yes thats exacly the dosflash im using. i flash to wh16ns60 1.00 as instructed with makemkvcon64.exe. since the drive is in boot mode and sdfgui refuse to flash it. but dosflash still cant intro the device

i have seen drives in boot mode before you can flash them with the offical LG tool then downgrade to wh16ns60 1.02mk

then full flash down to 1.00 wh16ns60

then try again in dos

[Billycar11]

also your sure your using tht dos flash the one in the video looks like normal but its modified to support these chips.
make sure your using it
its linked in description

[truemaster]

yes i download it and has the same names dates and i even try completly with one on the video. also its strange that the drive is in boot mode but the drive report it self as bh16ns60? i never try to flash with such firmware

[truemaster]

and cant find an official flasher to unstuck it from boot mode

[Billycar11]

and cant find an official flasher to unstuck it from boot mode

what one are you using?
you can try the unlocked lg flasher here: https://drive.google.com/file/d/102V7DU ... sp=sharing
and flash 1.00 de wh16ns60

[truemaster]

oh i tryed that one as well i select the wh16ns60 firmware and when i hit flash it throws
checksum is mismatched drive will go to boot mode plese retry again

[Billycar11]

oh i tryed that one as well i select the wh16ns60 firmware and when i hit flash it throws
checksum is mismatched drive will go to boot mode plese retry again

what fw is your drive on now?

are flashes in makemkv working?

post the drive info again

[truemaster]

Drive Information
OS device name: G:
Manufacturer: HL-DT-ST
Product: BD-RE BH16NS60
Revision: BOOT

No disc inserted
strange isnt but its the same drive as yesterday
the only flasher that works is makemkvcon64.exe but the drive status isnt change

[Billycar11]

Drive Information
OS device name: G:
Manufacturer: HL-DT-ST
Product: BD-RE BH16NS60
Revision: BOOT

No disc inserted
strange isnt but its the same drive as yesterday
the only flasher that works is makemkvcon64.exe but the drive status isnt change

i have only seen drives get stuck in boot mode if your using chipset or usb adapter that can pass through flashing commands.

how is the drive hooked up?

you tried this one?
https://hitachi-lg.com/en/support/firmware_download/

[truemaster]

the drive is hooped up with usb but i also try it with internal sata ports with same results.

[Billycar11]

the drive is hooped up with usb but i also try it with internal sata ports with same results.

dosflash is sata only your wasting you time and mine like that what sata adapter?

plz go plug it in to sata
also your sure you bios is in ide mode?
lets see screen shot of that
whats your motherboard? or cpu

[truemaster]

wait when trying with dosflash i hook with internal sata. i know usb isnt ok with dosflash.
im using a vt6421 pci to sata for dosflash on old computer that i used to flash xbox 360 drives that computer is only ide so the dosflash part its fine. my new computer isnt compatible with dosflash even on ide mode

[Billycar11]

wait when trying with dosflash i hook with internal sata. i know usb isnt ok with dosflash.
im using a vt6421 pci to sata for dosflash on old computer that i used to flash xbox 360 drives that computer is only ide so the dosflash part its fine. my new computer isnt compatible with dosflash even on ide mode

i was talking about the usb one have you tried running those flashers when on direct sata not the usb one.
you should be able to get out of boot mode

[truemaster]

i had tryed with internal sata on my modern computer too.
here some screenshots from my retro computer that doshflash is compatible with
ahh cant upload screeshots quaota exxeds

[Billycar11]

i had tryed with internal sata on my modern computer too.
here some screenshots from my retro computer that doshflash is compatible with
ahh cant upload screeshots quaota exxeds

imgur