LibreDrive for Pioneer drives

[Coopervid]

I see now the problem. Please check your PM.

[chikinov]

I see now the problem. Please check your PM.

Thanks for the help. But I am not authorised to reply you through PM because I am too new here. Please send me the flasher. Thank you so much.

[Coopervid]

Check new PM

[MKUltra2020]

Hi, I've just created an account to seek some help, though I've been using MakeMKV for a few years now. Hopefully someone will be able to assist me.

Until just recently, I had been using an LG external blu-ray drive for ripping my BDs and DVDs. It still seems to work fine, but I decided to purchase a new Pioneer external BD Drive. I've noticed that LibreDrive does not automatically enable itself for the Pioneer drive like it does the LG. (EDIT: Upon further inspection, it seems that LibreDrive doesn't actually auto-enable, but it does say that it's available for the LG drive)

I'm hesitant to flash and potentially brick a brand new drive, so I'm hoping there is a simple solution that I'm clearly overlooking.

Here is the drive information MakeMKV gives me for the Pioneer drive:

OS device name: E:
Manufacturer: PIONEER
Product: BD-RW BDR-XD08
Revision: 1.00
Serial number: REDACTED
Firmware date: 2022-04-03
Bus encryption flags: 1B
Highest AACS version: 81

LibreDrive Information

Status: Possible, not yet enabled
Drive platform: Pioneer RS9330
Firmware version: GENE

Thank you in advance. I don't know if I'm able to receive PMs yet since I literally only just joined, but I hope someone here can point me in the right direction.

Conversely, since the LG is the older of the two drives I have less attachment to it so I would consider flashing that one for LibreDrive, if someone could help with that.

[randman76]

Hello there,

I am a newbie to this forum. There is a lot of good info here, thanks for providing. I recently purchased the BDR-S13U-X as well and was hoping I could obtain the latest flasher? I was going send a PM to Mike but I get an error since I just signed up.

Thanks in advance,
Randman76

[Billycar11]

Hello there,

I am a newbie to this forum. There is a lot of good info here, thanks for providing. I recently purchased the BDR-S13U-X as well and was hoping I could obtain the latest flasher? I was going send a PM to Mike but I get an error since I just signed up.

Thanks in advance,
Randman76

The ux can't be flashed I recommend you return it and get a ux from a seller with old firmware

[joserz]

I do not see the model number on the list it is a MODEL BD-RW BDR-213M Pioneer RS9200


Current profile: DVD-ROM
Manufacturer: PIONEER
Product: BD-RW BDR-213M
Revision: 1.04
Serial number:
Firmware date: 2022-12-12
Bus encryption flags: 1B
Highest AACS version: 68

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: Pioneer RS9200
Firmware version: ID56

[Billycar11]

I do not see the model number on the list it is a MODEL BD-RW BDR-213M Pioneer RS9200


Current profile: DVD-ROM
Manufacturer: PIONEER
Product: BD-RW BDR-213M
Revision: 1.04
Serial number:
Firmware date: 2022-12-12
Bus encryption flags: 1B
Highest AACS version: 68

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: Pioneer RS9200
Firmware version: ID56

sorry man to new return it cant be flashed but i have those crossflashed to s13 ubk old fw if you want one

[Lololark]

Hello, total noob here. This is what I've got.
The first bluray I ripped mostly worked fine. The 2nd one I tried failed, and now the discs won't load.
Any advice? Thank you.

Manu: Pioneer
Prod: bd-rw bdr-td04d
Rev: 1.00
S#: lfdl069049wl
Fw date: 2012-02-27
Bef: 1b
H aacs v: 2.0

Status: possible but very unlikely to happen
Drive platform: Pioneer rs1040
Firmware version: id84

[MartyMcNuts]

Hello, total noob here. This is what I've got.
The first bluray I ripped mostly worked fine. The 2nd one I tried failed, and now the discs won't load.
Any advice? Thank you.

Manu: Pioneer
Prod: bd-rw bdr-td04d
Rev: 1.00
S#: lfdl069049wl
Fw date: 2012-02-27
Bef: 1b
H aacs v: 2.0

Status: possible but very unlikely to happen
Drive platform: Pioneer rs1040
Firmware version: id84

Power off the drive for a few minutes before turning it back on and trying again.

[Evil Teddy]

I have this one:

Laufwerksinformation
OS-Gerätename: G:
Produzent: PIONEER
Produkt: BD-RW BDR-XS07U
Revision: 1.03
Serienummer: CIDL008016WL
Firmware-Datum: 2023-01-06
Markierungen der Bus-Verschlüsselung: 13
Highest AACS version: 81

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: Pioneer RS8E21
Firmware version: ID05

The error is:
ILLEGAL REQUEST:COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED
and
LibreDrive compatible drive is required to open this disc - video can't be decrypted.

[Billycar11]

I have this one:

Laufwerksinformation
OS-Gerätename: G:
Produzent: PIONEER
Produkt: BD-RW BDR-XS07U
Revision: 1.03
Serienummer: CIDL008016WL
Firmware-Datum: 2023-01-06
Markierungen der Bus-Verschlüsselung: 13
Highest AACS version: 81

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: Pioneer RS8E21
Firmware version: ID05

The error is:
ILLEGAL REQUEST:COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED
and
LibreDrive compatible drive is required to open this disc - video can't be decrypted.

Sorry man that drive is to new.
If you can I recommend you return it if you want UHD and a pioneer best to get from a seller in your region

[Lololark]

Hello, total noob here. This is what I've got.
The first bluray I ripped mostly worked fine. The 2nd one I tried failed, and now the discs won't load.
Any advice? Thank you.

Manu: Pioneer
Prod: bd-rw bdr-td04d
Rev: 1.00
S#: lfdl069049wl
Fw date: 2012-02-27
Bef: 1b
H aacs v: 2.0

Status: possible but very unlikely to happen
Drive platform: Pioneer rs1040
Firmware version: id84

Power off the drive for a few minutes before turning it back on and trying again.

Thanks a lot man, that did the trick.
That's what I'd been doing, but it didn't work until now. I also changed the settings to more "read retry" attempts, I don't know if that helped make a difference, but I'm back on track.

[Evil Teddy]

Sorry man that drive is to new.
If you can I recommend you return it if you want UHD and a pioneer best to get from a seller in your region

Asmcom seller in this forum said that this drive is compatible with makemkv. Link: viewtopic.php?p=73484#p73484

[MartyMcNuts]

Sorry man that drive is to new.
If you can I recommend you return it if you want UHD and a pioneer best to get from a seller in your region

Asmcom seller in this forum said that this drive is compatible with makemkv. Link: viewtopic.php?p=73484#p73484

The drive is compatible only when it has older firmware (prior to Dec 2022).