Page 1 of 1
Deadpool and Wolverine 4K Failed to open disc
Posted: Tue Oct 22, 2024 11:21 pm
by tumblejunky
I just got deadpool and wolverine and when trying to open disc to rip get error below. MakeMKV update 1.17.8 I am not sure what is needed for the decryption to work. Any help would be appreciated.
The volume key is unknown for this disc - video can't be decrypted
Failed to open disc
Re: Deadpool and Wolverine 4K Failed to open disc
Posted: Wed Oct 23, 2024 12:03 am
by MrPenguin
tumblejunky wrote: ↑Tue Oct 22, 2024 11:21 pm
I just got deadpool and wolverine and when trying to open disc to rip get error below. MakeMKV update 1.17.8 I am not sure what is needed for the decryption to work. Any help would be appreciated.
UHD disk? See
this thread.
Re: Deadpool and Wolverine 4K Failed to open disc
Posted: Wed Oct 23, 2024 12:19 am
by tumblejunky
Yes. Sorry. Searched google and didn't see that thread pop up. Got to remember the shitification of search engines.
Re: Deadpool and Wolverine 4K Failed to open disc
Posted: Wed Oct 23, 2024 9:31 pm
by SmarmyGRC
If I need to move this post lmk..
I am having an issue where Windows and MakeMKV don't register the Deadpool and Wolverine 4K disc at all. I just get, "No disc", after the light blinks green a few times and maybe 30 seconds. I'm on MakeMKV v1.17.8 x64.
I know this likely isn't an issue with MakeMKV, but I haven't ever had an issue opening a 4K disc and I just ripped Indiana Jones and the Last Crusade yesterday, and have ripped probably 60 others. I tried adding the latest keydb.cfg to "%USERPROFILE%\.MakeMKV" with no result.
I tried the regular blu-ray and it works as expected. I stuck the 4K disc in my PS5 and it works perfectly. Drive info below, it is a flashed BDR-UD03. Wondering if anyone else is having a similar issue?
Drive Information
OS device name: H:
Manufacturer: PIONEER
Product: BD-RW BDR-UD04
Revision: 1.14
Serial number: [redacted]
Firmware date: 2020-06-15
Bus encryption flags: 1B
Highest AACS version: 81
LibreDrive Information
Status: Enabled
Drive platform: RS8A10
Firmware name: PIONEER BDR-US04
Firmware type: Original (unpatched)
Firmware version: 1.14
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes
Re: Deadpool and Wolverine 4K Failed to open disc
Posted: Wed Oct 23, 2024 9:40 pm
by MartyMcNuts
SmarmyGRC wrote: ↑Wed Oct 23, 2024 9:31 pm
If I need to move this post lmk..
I am having an issue where Windows and MakeMKV don't register the Deadpool and Wolverine 4K disc at all. I just get, "No disc", after the light blinks green a few times and maybe 30 seconds. I'm on MakeMKV v1.17.8 x64.
I know this likely isn't an issue with MakeMKV, but I haven't ever had an issue opening a 4K disc and I just ripped Indiana Jones and the Last Crusade yesterday, and have ripped probably 60 others. I tried adding the latest keydb.cfg to "%USERPROFILE%\.MakeMKV" with no result.
I tried the regular blu-ray and it works as expected. I stuck the 4K disc in my PS5 and it works perfectly. Drive info below, it is a flashed BDR-UD03. Wondering if anyone else is having a similar issue?
Drive Information
OS device name: H:
Manufacturer: PIONEER
Product: BD-RW BDR-UD04
Revision: 1.14
Serial number: [redacted]
Firmware date: 2020-06-15
Bus encryption flags: 1B
Highest AACS version: 81
LibreDrive Information
Status: Enabled
Drive platform: RS8A10
Firmware name: PIONEER BDR-US04
Firmware type: Original (unpatched)
Firmware version: 1.14
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes
Start by cleaning the disc.
Re: Deadpool and Wolverine 4K Failed to open disc
Posted: Wed Oct 23, 2024 11:26 pm
by SmarmyGRC
tried that, mild soap, got it shining....still no dice... returning it and getting another copy from a different vendor
MartyMcNuts wrote: ↑Wed Oct 23, 2024 9:40 pm
Start by cleaning the disc.
Re: Deadpool and Wolverine 4K Failed to open disc
Posted: Thu Oct 24, 2024 7:10 pm
by hipchen
I am having the same issue
I upgraded to the latest version already
Using LibreDrive mode (v06.3 id=E3767A939283)
Using direct disc access mode
Loaded content hash table, will verify integrity of M2TS files.
Saved AACS dump file as C:\Users\Rich/.MakeMKV/MKB20_v77_MARVEL_STUDIOS'_DEADPOOL_AND_WOLVERINE_CF38.tgz
The volume key is unknown for this disc - video can't be decrypted
Failed to open disc
Re: Deadpool and Wolverine 4K Failed to open disc
Posted: Fri Oct 25, 2024 12:37 am
by MartyMcNuts
hipchen wrote: ↑Thu Oct 24, 2024 7:10 pm
I am having the same issue
I upgraded to the latest version already
Using LibreDrive mode (v06.3 id=E3767A939283)
Using direct disc access mode
Loaded content hash table, will verify integrity of M2TS files.
Saved AACS dump file as C:\Users\Rich/.MakeMKV/MKB20_v77_MARVEL_STUDIOS'_DEADPOOL_AND_WOLVERINE_CF38.tgz
The volume key is unknown for this disc - video can't be decrypted
Failed to open disc
The key isn't available yet. Did you email in your dump file?
Re: Deadpool and Wolverine 4K Failed to open disc
Posted: Fri Oct 25, 2024 11:06 am
by MrPenguin
MartyMcNuts wrote: ↑Fri Oct 25, 2024 12:37 am
hipchen wrote: ↑Thu Oct 24, 2024 7:10 pm
Saved AACS dump file as C:\Users\Rich/.MakeMKV/MKB20_v77_MARVEL_STUDIOS'_DEADPOOL_AND_WOLVERINE_CF38.tgz
The key isn't available yet. Did you email in your dump file?
I think this is one of the "Deadpool and Wolverine" disks already in KEYDB.cfg.
Re: Deadpool and Wolverine 4K Failed to open disc
Posted: Fri Oct 25, 2024 3:26 pm
by Mikeracing
i have the same cf38 and the latest keydb that i could find didnt work
Re: Deadpool and Wolverine 4K Failed to open disc
Posted: Tue Nov 12, 2024 9:26 pm
by SmarmyGRC
SmarmyGRC wrote: ↑Wed Oct 23, 2024 11:26 pm
tried that, mild soap, got it shining....still no dice... returning it and getting another copy from a different vendor
MartyMcNuts wrote: ↑Wed Oct 23, 2024 9:40 pm
Start by cleaning the disc.
Just want to update that with another copy from B&N and a copy of the US steelbook, I am still just getting the message that simply states "No disc". I have ripped another half-dozen or so 4K movies from disc so I'm fairly confident it isn't the drive. I'm getting a copy of the UK release because why not.. lol
Re: Deadpool and Wolverine 4K Failed to open disc
Posted: Fri Nov 22, 2024 9:55 pm
by SmarmyGRC
SmarmyGRC wrote: ↑Tue Nov 12, 2024 9:26 pm
SmarmyGRC wrote: ↑Wed Oct 23, 2024 11:26 pm
tried that, mild soap, got it shining....still no dice... returning it and getting another copy from a different vendor
MartyMcNuts wrote: ↑Wed Oct 23, 2024 9:40 pm
Start by cleaning the disc.
Just want to update that with another copy from B&N and a copy of the US steelbook, I am still just getting the message that simply states "No disc". I have ripped another half-dozen or so 4K movies from disc so I'm fairly confident it isn't the drive. I'm getting a copy of the UK release because why not.. lol
UK version arrived....was recognized and started ripping IMMEDIATELY...crazy...hopefully this helps someone down the road!