Pioneer BDR-XD07UHD - The Fall Guy 4K Extended

Discussion of LibreDrive mode, compatible drives and firmwares
Post Reply
SeaLight
Posts: 9
Joined: Sat Jan 23, 2016 4:08 am

Pioneer BDR-XD07UHD - The Fall Guy 4K Extended

Post by SeaLight »

I've been previously able to rip UHD discs (Jurassic World: Dominion, Maverick, etc.) but I just went to rip The Fall Guy's extended version in 4K and I just got a message that I haven't previously seen and it won't let me rip it. Any help here?
Can't read AACS VID from disc - most likely current AACS host certificate is revoked by your drive
Saved AACS dump file as /Users/eric/Library/MakeMKV/MKB20_v77_The_Fall_Guy_-_Extended_Cut_56A0.tgz
LibreDrive compatible drive is required to open this disc - video can't be decrypted.
Failed to open disc
Drive Information
OS device name: /dev/rdisk4
Current profile: BD-ROM
Manufacturer: PIONEER
Product: BD-RW BDR-XD07U
Revision: 1.05
Serial number: [redacted]
Firmware date: 2023-01-06
Bus encryption flags: 13
Highest AACS version: 77

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: Pioneer RS8D31
Firmware version: ID05

Disc Information
Label: FALLGUY_UPK77
Timestamp: 2024-05-06 11:32:49
Protection: AACS2.0/C v77
Data capacity: 92.89 Gb
Disc type: BD-ROM UHD
Number of layers: 3
Bus encryption flags: 80
Billycar11
Posts: 4318
Joined: Sun Aug 24, 2014 5:49 am

Re: Pioneer BDR-XD07UHD - The Fall Guy 4K Extended

Post by Billycar11 »

SeaLight wrote:
Tue Jul 23, 2024 3:40 pm
I've been previously able to rip UHD discs (Jurassic World: Dominion, Maverick, etc.) but I just went to rip The Fall Guy's extended version in 4K and I just got a message that I haven't previously seen and it won't let me rip it. Any help here?
Can't read AACS VID from disc - most likely current AACS host certificate is revoked by your drive
Saved AACS dump file as /Users/eric/Library/MakeMKV/MKB20_v77_The_Fall_Guy_-_Extended_Cut_56A0.tgz
LibreDrive compatible drive is required to open this disc - video can't be decrypted.
Failed to open disc
Drive Information
OS device name: /dev/rdisk4
Current profile: BD-ROM
Manufacturer: PIONEER
Product: BD-RW BDR-XD07U
Revision: 1.05
Serial number: [redacted]
Firmware date: 2023-01-06
Bus encryption flags: 13
Highest AACS version: 77

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: Pioneer RS8D31
Firmware version: ID05

Disc Information
Label: FALLGUY_UPK77
Timestamp: 2024-05-06 11:32:49
Protection: AACS2.0/C v77
Data capacity: 92.89 Gb
Disc type: BD-ROM UHD
Number of layers: 3
Bus encryption flags: 80
you were never able to rip UHD discs on that FW
did you just update if so sadly you ruined your drive

i still have pioneers with old FW if you want one see below
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
brey749
Posts: 3
Joined: Fri Jun 28, 2024 12:39 am

Re: Pioneer BDR-XD07UHD - The Fall Guy 4K Extended

Post by brey749 »

I just received and tried ripping The Fall Guy, extended, and also received an error. Not sure where to go from here...
Using direct disc access mode
Loaded content hash table, will verify integrity of M2TS files.
Saved AACS dump file as ...[redacted]
The volume key is unknown for this disc - video can't be decrypted
Failed to open disc
MakeMKV Info:

Drive Information
OS device name: /dev/rdisk4
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BP60NB10
Revision: 1.00
Serial number: [redacted]
Firmware date: 2117-11-21 17:20
Bus encryption flags: 17
Highest AACS version: 78

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.00
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

Disc Information
Label: FALLGUY_UPK75
Timestamp: 2024-05-03 16:53:49
Protection: AACS2.0/C v77
Data capacity: 92.83 Gb
Disc type: BD-ROM UHD
Number of layers: 3
Bus encryption flags: 80
d00zah
Posts: 1581
Joined: Mon Jun 06, 2016 8:23 pm

Re: Pioneer BDR-XD07UHD - The Fall Guy 4K Extended

Post by d00zah »

brey749 wrote:
Thu Jul 25, 2024 6:14 pm
I just received and tried ripping The Fall Guy, extended, and also received an error. Not sure where to go from here...
Using direct disc access mode
Loaded content hash table, will verify integrity of M2TS files.
Saved AACS dump file as ...[redacted]
The volume key is unknown for this disc - video can't be decrypted
Failed to open disc
MakeMKV Info:

Drive Information
OS device name: /dev/rdisk4
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BP60NB10
Revision: 1.00
Serial number: [redacted]
Firmware date: 2117-11-21 17:20
Bus encryption flags: 17
Highest AACS version: 78

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.00
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

Disc Information
Label: FALLGUY_UPK75
Timestamp: 2024-05-03 16:53:49
Protection: AACS2.0/C v77
Data capacity: 92.83 Gb
Disc type: BD-ROM UHD
Number of layers: 3
Bus encryption flags: 80
Suggested reading... UHD FAQ
MakeMKV says that "the volume key is unknown for this disc"?
MakeMKV produces an AACS .tgz dump file whenever you try to open a disc for which the key is unknown, and will report that the dump has been created. Email the dump file to svq@makemkv.com.
I submitted a dump, how long does it take?
Once submitted, the turnaround can be pretty fast, between 12 to 48 hours. However, it can also sometimes take several days or longer.
When you submit a dump, ensure that:
- You are using the latest version of MakeMKV.
- You are using a LibreDrive-enabled drive (be it "friendly" or "official", but it must be LibreDrive enabled).
- You have "Enable Internet access" enabled in Preferences (in the General tab), so that MakeMKV will check for updated keys when you try to open the disc again.
- You are opening the original disc (not a backup, not ISO).
- You are opening the disc using a real disc drive natively (no elby clonedrive, no vmware, no dvdfab or discsoft virtual, etc).
brey749
Posts: 3
Joined: Fri Jun 28, 2024 12:39 am

Re: Pioneer BDR-XD07UHD - The Fall Guy 4K Extended

Post by brey749 »

d00zah wrote:
Thu Jul 25, 2024 6:43 pm
Suggested reading... UHD FAQ
Perfect. Thanks for the help! I just submitted the AACS dump file for both versions - appreciate you taking the time to direct me to the right spot.
d00zah
Posts: 1581
Joined: Mon Jun 06, 2016 8:23 pm

Re: Pioneer BDR-XD07UHD - The Fall Guy 4K Extended

Post by d00zah »

brey749 wrote:
Thu Jul 25, 2024 7:57 pm
d00zah wrote:
Thu Jul 25, 2024 6:43 pm
Suggested reading... UHD FAQ
Perfect. Thanks for the help! I just submitted the AACS dump file for both versions - appreciate you taking the time to direct me to the right spot.
You're welcome. Enjoy!
darthtye
Posts: 6
Joined: Mon Oct 15, 2018 3:58 pm

Re: Pioneer BDR-XD07UHD - The Fall Guy 4K Extended

Post by darthtye »

Seeing similar issues with 4k purchased from amazon I guess I'll wait for next update and try again thanks
MrPenguin
Posts: 492
Joined: Thu Oct 19, 2023 11:31 pm

Re: Pioneer BDR-XD07UHD - The Fall Guy 4K Extended

Post by MrPenguin »

darthtye wrote:
Sun Jul 28, 2024 11:28 pm
Seeing similar issues with 4k purchased from amazon I guess I'll wait for next update and try again thanks
Why aren't you posting this in the Fall Guy 4K disks thread?
sniep
Posts: 3
Joined: Wed Jan 20, 2021 7:22 am

Re: Pioneer BDR-XD07UHD - The Fall Guy 4K Extended

Post by sniep »

I'm having the same issue.

Fall Guy 4K (US) from Amazon, both Extended and Theatrical discs fail to even load all titles, erring out with OS Errors scrolling in the MakeMKV log.

Is there still a pending update that will address this title?
Post Reply