SDFtool Flasher

[ictbydesign]

Does anyone know if either of these drives can be flashed.
Both are LG BD rewriter.
Model = BH10LS38
Manufactured - July 2011

Model = BH10LS30
Manufactured - July 2010

ROM Ver:1.00 for both

Thanks in advance.

[zittrig]

Does anyone know if either of these drives can be flashed.
Both are LG BD rewriter.
Model = BH10LS38
Manufactured - July 2011

Model = BH10LS30
Manufactured - July 2010

ROM Ver:1.00 for both

Thanks in advance.

No, to old. Both. Sorry.

[mescalero]

I have been trying to flash the LG BP50NB40 by using the SDFtool flasher on a Mac, using Windows via VMWare Fusion. I first flashed to the 1.03 firmware for my drive, and then to the BU40N-1.00 firmware via the Recover option on the tool, but it is not working. I feel like there was some mention about problems using the tool on a virtual machine, but I previously had luck flashing a Pioneer drive on VMWare, using the BDRFlash tool (thanks to coopervid for the help with that one!).

[nicholfd]

I have been trying to flash the LG BP50NB40 by using the SDFtool flasher on a Mac, using Windows via VMWare Fusion. I first flashed to the 1.03 firmware for my drive, and then to the BU40N-1.00 firmware via the Recover option on the tool, but it is not working. I feel like there was some mention about problems using the tool on a virtual machine, but I previously had luck flashing a Pioneer drive on VMWare, using the BDRFlash tool (thanks to coopervid for the help with that one!).

This is what MakeMKV is currently saying about the drive:

Screenshot 2026-02-24 at 3.00.27 PM.png

Not a VM problem. I've used VMware Fusion, Parallels & UTM on macOS to flash drives.

Carefully follow the animated GIF/video on the first page of this thread. You must select a firmware three times. Pay attention to the animated GIF & when/where a firmware is chosen, and what firmware is chosen.

[mescalero]

Ah, got it! The part where you select the same firmware, but in Recover mode, is what threw me. Thanks a million.

[Billycar11]

Ah, got it! The part where you select the same firmware, but in Recover mode, is what threw me. Thanks a million.

on mac unless your using a vm to flash
the method in the guide is much easier to crossflash where you use the hbd fw

[nicholfd]

Ah, got it! The part where you select the same firmware, but in Recover mode, is what threw me. Thanks a million.

Yep - been there, done that & took me a couple of times, my first time.

Thanks,
Frank

[DrOct]

Hi there! Thanks so much for this great tool. I just flashed a Verbatim drive with a BU40N in it to 1.03. Testing now and its working well ripping a disc as we speak.

I'm going to try on a Buffalo drive that appears to have a BU40N in it too soon.

I did notice this and other sentences in the first page: "If your external Buffalo / Archgon / LG BU40N has encrypted firmware, flash BU40N 1.03-MK first, then you can either leave it as is or flash BU40N 1.00 or Buffalo BU / BN firmware if you want to."

I'm curious what the reason for dropping to 1.00 is. Is there some advantage to it over 1.03? Apologies if I've missed the explanation for this. I didn't see it in the first post and this is a very long thread...

[zittrig]

....
I did notice this and other sentences in the first page: "If your external Buffalo / Archgon / LG BU40N has encrypted firmware, flash BU40N 1.03-MK first, then you can either leave it as is or flash BU40N 1.00 or Buffalo BU / BN firmware if you want to."

I'm curious what the reason for dropping to 1.00 is. Is there some advantage to it over 1.03? Apologies if I've missed the explanation for this. I didn't see it in the first post and this is a very long thread...

With the 1.00 you can use e.g. DVDFab also, which accept native 4K firmware only.

[DrOct]

With the 1.00 you can use e.g. DVDFab also, which accept native 4K firmware only.

Got it. So if I'm not planning to use DVDFab, no real reason to go further and switch to 1.00 then. Thanks!

[babayaga]

Sorry, this has probably been answered before, but

these are my settings, I have tried SDFTool flasher, and i see MT1959 platform is with a red x (disabled i assume), and i get the same error message when i try to write a firmware to the drive ( ASUS-BW-16D1H-U-A204-WM01001-211901041044 ).

Is there anything to do, or is the drive not possible to use for this? thanks for all answers i can get

Drive Information
OS device name: \Device\CdRom0
Current profile: DVD-ROM
Manufacturer: ASUS
Product: BW-16D1H-U
Revision: E114
Serial number: SEDL056253WL
Firmware date: 2017-12-21
Bus encryption flags: 1B
Highest AACS version: 64

LibreDrive Information
Status: Enabled
Drive platform: RS8601
Firmware name: PIONEER BDR-209
Firmware type: Original (unpatched)
Firmware version: E114/ID71
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

[Billycar11]

Sorry, this has probably been answered before, but

these are my settings, I have tried SDFTool flasher, and i see MT1959 platform is with a red x (disabled i assume), and i get the same error message when i try to write a firmware to the drive ( ASUS-BW-16D1H-U-A204-WM01001-211901041044 ).

Is there anything to do, or is the drive not possible to use for this? thanks for all answers i can get

Drive Information
OS device name: \Device\CdRom0
Current profile: DVD-ROM
Manufacturer: ASUS
Product: BW-16D1H-U
Revision: E114
Serial number: SEDL056253WL
Firmware date: 2017-12-21
Bus encryption flags: 1B
Highest AACS version: 64

LibreDrive Information
Status: Enabled
Drive platform: RS8601
Firmware name: PIONEER BDR-209
Firmware type: Original (unpatched)
Firmware version: E114/ID71
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

Sure email me that drive info section see below for email

For all others there is no need to post your makemkv drive info section publicly just email it to me directly