Ultimate UHD Drives Flashing Guide Updated 2024

[Billycar11]

Hi all, which ones of these 3 is the best for ripping UHD discs?

Buffalo BRUHD-PU3-BK
ASUS BW-16D1HT
LG BP60NB10

Out of those probably the bp60
But a pioneer is way better email me about a pioneer if you want one

[Coopervid]

Get a Pioneer. Best drive.

[Starkiller-1994]

I am trying to do this process for BP50NB40. In the section it mean BP50NB40 to > BP50NB40-NB50-1.03MK and ...> BP50NB40-NB50-1.03MK with enc. Where do i find the with enc and the BP50NB40-NB50-1.03MK with bootloader/full flash as well.

[MartyMcNuts]

I am trying to do this process for BP50NB40. In the section it mean BP50NB40 to > BP50NB40-NB50-1.03MK and ...> BP50NB40-NB50-1.03MK with enc. Where do i find the with enc and the BP50NB40-NB50-1.03MK with bootloader/full flash as well.

The easiest way is to use SDFtool Flasher and follow these steps.

1. Flash the drive to BP50NB40 (NB50) 1.03-MK.

Now for the crossflash:

2. Select the RECOVERY option and in the pop up, select the BP50NB40 (NB50) 1.03-MK firmware that you just flashed.
3. Select the BP60NB10 1.00-MK or BU40N 1.00 firmware that you want to use in the normal drop box.
4. Click START

[Johnqmalapert]

So for the Buffalo BRUHD-PU3-BK, I used the SDF 1.3.5 flasher on "write", loaded HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin and hit start. Is that all there is to it?

[Billycar11]

So for the Buffalo BRUHD-PU3-BK, I used the SDF 1.3.5 flasher on "write", loaded HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin and hit start. Is that all there is to it?

pretty much you might have to do enc depending how new your fw is think bu13 and up is not sure haven't seen those in a bit

[MartyMcNuts]

So for the Buffalo BRUHD-PU3-BK, I used the SDF 1.3.5 flasher on "write", loaded HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin and hit start. Is that all there is to it?

Yep. MakeMKV should now show the drive as BU40N 1.03

[Bitofacraic]

I have a really noob question and I apologize for asking.

But essentially, I just need a flashed drive to rip my UHD movies? And would I need a second one to do regular BD's, or is one enough?

I'm just too do this for the first time and I'm pretty clueless so wanted to ask the people that know their stuff

[d00zah]

I have a really noob question and I apologize for asking.

But essentially, I just need a flashed drive to rip my UHD movies? And would I need a second one to do regular BD's, or is one enough?

I'm just too do this for the first time and I'm pretty clueless so wanted to ask the people that know their stuff

Anything recommended in the 1st post will handle DVD/BD/UHD.

[Johnqmalapert]

So for the Buffalo BRUHD-PU3-BK, I used the SDF 1.3.5 flasher on "write", loaded HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin and hit start. Is that all there is to it?

pretty much you might have to do enc depending how new your fw is think bu13 and up is not sure haven't seen those in a bit

What is enc? encryption? What is that all about? thanks.

Yep. MakeMKV should now show the drive as BU40N 1.03

It doesn't. Is this a problem?
it reads it as BD-RE BUFFALO OPTICAL Drive 1.03

[Coopervid]

When flashing with SDFTool there is a checkbox called "enc" you might have to check it or not. Try both scenarios. One will succeed and the other can't do any harm.

[Johnqmalapert]

It seems no matter what I do (tried the all in one fw and the MK fw (japan) and the drive just continues to read:
Manufacturer: BUFFALO
Product: Optical Drive
Revision: 1.03
Firmware date: 2118-10-24 19:34
Bus encryption flags: 17
Highest AACS version: 78

[Billycar11]

It seems no matter what I do (tried the all in one fw and the MK fw (japan) and the drive just continues to read:
Manufacturer: BUFFALO
Product: Optical Drive
Revision: 1.03
Firmware date: 2118-10-24 19:34
Bus encryption flags: 17
Highest AACS version: 78

Your done it will always read buffalo the case injects it own name mike had to work around that for flashing and drive recognition.

Your drive did not come on 1.03 it cam on bu13 or something like that

[paraw]

Hi all, my old ASUS drive just died, so I decided to upgrade to a UHD drive, and I bought a Hitachi-LG BU40N.
Reading the pinned post at the beginning of this thread, it seems like I'll have to flash its firmware, which I'm OK with. My question is the following: I read that "The only flasher anyone should be using now is Martys SDF GUI"; is there an alternative for Linux users, or must I do the flashing on Windows?

[Billycar11]

Hi all, my old ASUS drive just died, so I decided to upgrade to a UHD drive, and I bought a Hitachi-LG BU40N.
Reading the pinned post at the beginning of this thread, it seems like I'll have to flash its firmware, which I'm OK with. My question is the following: I read that "The only flasher anyone should be using now is Martys SDF GUI"; is there an alternative for Linux users, or must I do the flashing on Windows?

i should add to that if oyur on windows use that.
but just use the commands i posted for Linux