Hello everybody,
im new to this, and just bought 2 x Archgon MD-8107S-U3-UHD.
I try to flash with the SDF or the modified ASUS tool to DE- BU40N firmware, but nothing happens.. reading the firmware with the tool..also..it creates the directory and nothing happens.
In MakeMKV: Asus - DRW-24F1MT
Can somebody tell me what to do? or which firmware to use?
thank you very much!!
Archgon MD-8107S-U3YC-UHD
-
- Posts: 2896
- Joined: Wed Nov 22, 2017 11:45 pm
Re: Archgon MD-8107S-U3YC-UHD
1. Make sure you are using windows 10 (not a VM)martijnspaan wrote: ↑Sat Jun 19, 2021 6:06 pmHello everybody,
im new to this, and just bought 2 x Archgon MD-8107S-U3-UHD.
I try to flash with the SDF or the modified ASUS tool to DE- BU40N firmware, but nothing happens.. reading the firmware with the tool..also..it creates the directory and nothing happens.
In MakeMKV: Asus - DRW-24F1MT
Can somebody tell me what to do? or which firmware to use?
thank you very much!!
2. Make sure you have MakeMKV installed (v1.15.2 or above).
3. Make sure you have .NET Framework 4.7.2 or above.
4. With the drive, make sure you have either both USB plugs inserted (to 2 separate USB ports) or use the USB-C cable if possible.
I assume these come with firmware 1.01. If so, you can flash directly to DE BU40N 1.00 using either SDFtool or the ASUS flasher.
Cheers
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG + Others) & DIY Single Drive Flasher (WW): https://uhdenableddrives.com
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG + Others) & DIY Single Drive Flasher (WW): https://uhdenableddrives.com
-
- Posts: 3
- Joined: Sat Jun 19, 2021 6:02 pm
Re: Archgon MD-8107S-U3YC-UHD
Hello Goodmorning
ok... interesting.. im doing this remotely, so I will setup a new session later today to check the connections and .NET version.
So...the type: Asus - DRW-24F1MT ... that should work with the DE BU40N 1.00?
also.. im now getting firmware: 1.00...
thanks for your swift response
ok... interesting.. im doing this remotely, so I will setup a new session later today to check the connections and .NET version.
So...the type: Asus - DRW-24F1MT ... that should work with the DE BU40N 1.00?
also.. im now getting firmware: 1.00...
thanks for your swift response
-
- Posts: 4360
- Joined: Sun Aug 24, 2014 5:49 am
Re: Archgon MD-8107S-U3YC-UHD
Send your makemkv drive info it should not be showing up as asus I'm guessing that's your built in drivemartijnspaan wrote: ↑Sun Jun 20, 2021 9:21 amHello Goodmorning
ok... interesting.. im doing this remotely, so I will setup a new session later today to check the connections and .NET version.
So...the type: Asus - DRW-24F1MT ... that should work with the DE BU40N 1.00?
also.. im now getting firmware: 1.00...
thanks for your swift response
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
-
- Posts: 3
- Joined: Sat Jun 19, 2021 6:02 pm
Re: Archgon MD-8107S-U3YC-UHD
I feel so stupid!!!
you were right..it was the internal SATA drive... the second usb connector was plugged into a non functioning port.
after the drive was plugged in right... just like you said.. firmware 1.0.1... 10 seconds for flashing....done..working 1.00 uhd, libre etc etc etc...working..easy peasy.
thanks!
you were right..it was the internal SATA drive... the second usb connector was plugged into a non functioning port.
after the drive was plugged in right... just like you said.. firmware 1.0.1... 10 seconds for flashing....done..working 1.00 uhd, libre etc etc etc...working..easy peasy.
thanks!
-
- Posts: 2896
- Joined: Wed Nov 22, 2017 11:45 pm
Re: Archgon MD-8107S-U3YC-UHD
Good stuff!! Enjoy!martijnspaan wrote: ↑Sun Jun 20, 2021 9:41 pmI feel so stupid!!!
you were right..it was the internal SATA drive... the second usb connector was plugged into a non functioning port.
after the drive was plugged in right... just like you said.. firmware 1.0.1... 10 seconds for flashing....done..working 1.00 uhd, libre etc etc etc...working..easy peasy.
thanks!
Cheers
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG + Others) & DIY Single Drive Flasher (WW): https://uhdenableddrives.com
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG + Others) & DIY Single Drive Flasher (WW): https://uhdenableddrives.com