www.makemkv.com

MakeMKV support forum
https://forum.makemkv.com/forum/

Flow 4kUHD Unable to Rip

https://forum.makemkv.com/forum/viewtopic.php?t=42299

Page 1 of 1

Flow 4kUHD Unable to Rip

Posted: Thu Aug 20, 2026 8:08 pm
by SlapNTickle
Hello!

I'm having some real trouble ripping the 2024 4kUHD film Flow. After flowing some other threads: I have gotten the latest KeyDB file through KeyDB assistant, and my drive has LibreDrive enabled with Make MKV having the java jadk-26.0.1. I have previously been able to rip other 4kUHD movies successfully, but this one I'm having real trouble with. Any and all help will be appreciated.

I have attached the log to the end of the post and here is the drive and disc info from Make MKV:
OS device name: \Device\CdRom1
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.03
Serial number: MO7P4EB4651
Firmware date: 2118-10-24 19:34
Bus encryption flags: 17
Highest AACS version: 82

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.03
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

Disc Information
Label: FLOW
Timestamp: 2025-05-08 14:59:57
Protection: AACS2.0/C v82
Data capacity: 57.16 Gb
Disc type: BD-ROM UHD
Number of layers: 2
Bus encryption flags: 80

https://drive.google.com/file/d/1B2sSmg ... drive_link

Re: Flow 4kUHD Unable to Rip

Posted: Fri Aug 21, 2026 12:45 am
by MartyMcNuts
SlapNTickle wrote: Thu Aug 20, 2026 8:08 pm Hello!

I'm having some real trouble ripping the 2024 4kUHD film Flow. After flowing some other threads: I have gotten the latest KeyDB file through KeyDB assistant, and my drive has LibreDrive enabled with Make MKV having the java jadk-26.0.1. I have previously been able to rip other 4kUHD movies successfully, but this one I'm having real trouble with. Any and all help will be appreciated.

I have attached the log to the end of the post and here is the drive and disc info from Make MKV:
OS device name: \Device\CdRom1
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.03
Serial number: MO7P4EB4651
Firmware date: 2118-10-24 19:34
Bus encryption flags: 17
Highest AACS version: 82

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.03
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

Disc Information
Label: FLOW
Timestamp: 2025-05-08 14:59:57
Protection: AACS2.0/C v82
Data capacity: 57.16 Gb
Disc type: BD-ROM UHD
Number of layers: 2
Bus encryption flags: 80

https://drive.google.com/file/d/1B2sSmg ... drive_link
Copy and paste the log text.

Re: Flow 4kUHD Unable to Rip

Posted: Sat Aug 22, 2026 11:02 am
by SlapNTickle
I'm not able to for some reason. It's 62 million characters. But I have split it off onto it's own drive link here: https://drive.google.com/file/d/1Tuk-Ql ... sp=sharing

Re: Flow 4kUHD Unable to Rip

Posted: Sat Aug 22, 2026 3:52 pm
by dcoke22
Copied from the top of SlapNTickle's Google Drive link.

Code: Select all

Debug log started at Thu Aug 20 19:42:44 2026 , written by MakeMKV v1.18.4 win(x64-release)
001005:0000 MakeMKV v1.18.4 win(x64-release) started
Using 262272KB for read cache.
Network access is ENABLED, CURL version 7.72.0/Schannel/1.41.0 (x86_64-pc-win32) , proxy server not set.
WinCdArb=v1.2.0_tiny win(x64-release)
DEBUG: Code 0 at I4d{fg3a(vudG:Rh?<"SK6:;:121261704
DEBUG: Code 3221225486 at I4d{fg3a(vudG:Rh?<"SK6:;:121261727
DEBUG: Code 3221225486 at i^4-&RW&P8%g=4sa\JBJ:213130582
DEBUG: Code 3 at @"msWTt'T11F$o0`O'm,^T]+:29395310
SDF  v0a6: HL-DT-ST_BD-RE_BU40N_1.03_211810241934_MO7P4EB4651
DEBUG: Code 3 at @"msWTt'T11F$o0`O'm,^T]+:29395310
SDF  v0a6: HL-DT-ST_BD-RE_BU40N_1.03_211810241934_MO7P4EB4651
DEBUG: Code 3 at @"msWTt'T11F$o0`O'm,^T]+:29395310
SDF  v0a6: HL-DT-ST_BD-RE_BU40N_1.03_211810241934_MO7P4EB4651
001011:0000 Using LibreDrive mode (v06.3 id=866A98CB9C4E)
003007:0000 Using direct disc access mode
DEBUG: Code 101067008 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 101067008 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at Y=~:l,CzPj`G]VmKN5:121263429
DEBUG: Code 100795393 at Y=~:l,CzPj`G]VmKN5:121262302
002003:0000 Error 'Scsi error - NOT READY:LOGICAL UNIT IS IN PROCESS OF BECOMING READY' occurred while reading 'BD-RE HL-DT-ST BD-RE BU40N 1.03 MO7P4EB4651' at offset '61126475776'
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at Y=~:l,CzPj`G]VmKN5:121263429
DEBUG: Code 100795393 at Y=~:l,CzPj`G]VmKN5:121262302
002003:0000 Error 'Scsi error - NOT READY:LOGICAL UNIT IS IN PROCESS OF BECOMING READY' occurred while reading 'BD-RE HL-DT-ST BD-RE BU40N 1.03 MO7P4EB4651' at offset '61126475776'
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at Y=~:l,CzPj`G]VmKN5:121263429
DEBUG: Code 100795393 at Y=~:l,CzPj`G]VmKN5:121262302
002003:0000 Error 'Scsi error - NOT READY:LOGICAL UNIT IS IN PROCESS OF BECOMING READY' occurred while reading 'BD-RE HL-DT-ST BD-RE BU40N 1.03 MO7P4EB4651' at offset '30814699520'
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at Y=~:l,CzPj`G]VmKN5:121263429
DEBUG: Code 100795393 at Y=~:l,CzPj`G]VmKN5:121262302
002003:0000 Error 'Scsi error - NOT READY:LOGICAL UNIT IS IN PROCESS OF BECOMING READY' occurred while reading 'BD-RE HL-DT-ST BD-RE BU40N 1.03 MO7P4EB4651' at offset '30814701568'
DEBUG: Code 0 at xOxA5slwFaQF_Np:121262509
DEBUG: Code 0 at xOxA5slwFaQF_Np:213129846
DEBUG: Code 1 at xOxA5slwFaQF_Np:29395264
005084:0000 Failed to load content hash table, unable to verify integrity of M2TS files.
…
Not enough power maybe?

Re: Flow 4kUHD Unable to Rip

Posted: Sun Aug 23, 2026 12:38 am
by MartyMcNuts
dcoke22 wrote: Sat Aug 22, 2026 3:52 pm Copied from the top of SlapNTickle's Google Drive link.

Code: Select all

Debug log started at Thu Aug 20 19:42:44 2026 , written by MakeMKV v1.18.4 win(x64-release)
001005:0000 MakeMKV v1.18.4 win(x64-release) started
Using 262272KB for read cache.
Network access is ENABLED, CURL version 7.72.0/Schannel/1.41.0 (x86_64-pc-win32) , proxy server not set.
WinCdArb=v1.2.0_tiny win(x64-release)
DEBUG: Code 0 at I4d{fg3a(vudG:Rh?<"SK6:;:121261704
DEBUG: Code 3221225486 at I4d{fg3a(vudG:Rh?<"SK6:;:121261727
DEBUG: Code 3221225486 at i^4-&RW&P8%g=4sa\JBJ:213130582
DEBUG: Code 3 at @"msWTt'T11F$o0`O'm,^T]+:29395310
SDF  v0a6: HL-DT-ST_BD-RE_BU40N_1.03_211810241934_MO7P4EB4651
DEBUG: Code 3 at @"msWTt'T11F$o0`O'm,^T]+:29395310
SDF  v0a6: HL-DT-ST_BD-RE_BU40N_1.03_211810241934_MO7P4EB4651
DEBUG: Code 3 at @"msWTt'T11F$o0`O'm,^T]+:29395310
SDF  v0a6: HL-DT-ST_BD-RE_BU40N_1.03_211810241934_MO7P4EB4651
001011:0000 Using LibreDrive mode (v06.3 id=866A98CB9C4E)
003007:0000 Using direct disc access mode
DEBUG: Code 101067008 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 101067008 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at Y=~:l,CzPj`G]VmKN5:121263429
DEBUG: Code 100795393 at Y=~:l,CzPj`G]VmKN5:121262302
002003:0000 Error 'Scsi error - NOT READY:LOGICAL UNIT IS IN PROCESS OF BECOMING READY' occurred while reading 'BD-RE HL-DT-ST BD-RE BU40N 1.03 MO7P4EB4651' at offset '61126475776'
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at Y=~:l,CzPj`G]VmKN5:121263429
DEBUG: Code 100795393 at Y=~:l,CzPj`G]VmKN5:121262302
002003:0000 Error 'Scsi error - NOT READY:LOGICAL UNIT IS IN PROCESS OF BECOMING READY' occurred while reading 'BD-RE HL-DT-ST BD-RE BU40N 1.03 MO7P4EB4651' at offset '61126475776'
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at Y=~:l,CzPj`G]VmKN5:121263429
DEBUG: Code 100795393 at Y=~:l,CzPj`G]VmKN5:121262302
002003:0000 Error 'Scsi error - NOT READY:LOGICAL UNIT IS IN PROCESS OF BECOMING READY' occurred while reading 'BD-RE HL-DT-ST BD-RE BU40N 1.03 MO7P4EB4651' at offset '30814699520'
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at VJs9j8g7;i#^WIj*:121271617
DEBUG: Code 100795393 at `j<8k^nOmd,[xh~$:213130559
DEBUG: Code 100795393 at Y=~:l,CzPj`G]VmKN5:121263429
DEBUG: Code 100795393 at Y=~:l,CzPj`G]VmKN5:121262302
002003:0000 Error 'Scsi error - NOT READY:LOGICAL UNIT IS IN PROCESS OF BECOMING READY' occurred while reading 'BD-RE HL-DT-ST BD-RE BU40N 1.03 MO7P4EB4651' at offset '30814701568'
DEBUG: Code 0 at xOxA5slwFaQF_Np:121262509
DEBUG: Code 0 at xOxA5slwFaQF_Np:213129846
DEBUG: Code 1 at xOxA5slwFaQF_Np:29395264
005084:0000 Failed to load content hash table, unable to verify integrity of M2TS files.
…
Not enough power maybe?
Being on Linux, the most likely culprits are:

1. Insufficient power. Use USB-C or USB3+ ports direct from the motherboard, not case ports or use an AC powered USB hub of at least 24w.
2. Using BU40N 1.03-MK firmware. MakeMKV on Linux has an issue with this firmware version. Flash the drive down to BU40N 1.00.
All times are UTC
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited