www.makemkv.com

bb_2023 wrote: Fri Aug 28, 2026 6:56 pm Thanks for the reply!

Quick update — I ended up going with a Buffalo BRXL-PUS6U3B-TAA

Could someone point me to the current, correct MK firmware files for this drive (BN14 revision)? Want to make sure I'm flashing the right thing before proceeding.

Thanks again!

Drive Information
Manufacturer: BUFFALO
Product: Optical Drive
Revision: BN14
Serial number: MO8Q1HJ5746
Firmware date: 2121-06-21 13:33
Bus encryption flags: 1F
Highest AACS version: 43

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959

No disc inserted

Billycar11 wrote: Thu Aug 27, 2026 10:37 pm

bb_2023 wrote: Thu Aug 27, 2026 4:11 am Hi all,

Hoping for some guidance before I flash anything, since my drive's starting state doesn't quite match the cases I've found in other threads.

My drive info (from MakeMKV):

Manufacturer: LG
Product: BP50NB40
Revision: A101
Serial number: M60G7F01205
Firmware date: 2116-02-24 11:44
Bus encryption flags: 1F
Highest AACS version: 43

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Original (unpatched)
Firmware version: 0.A101D
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

What's working: Standard Blu-ray discs read and rip perfectly.

What's not working: UHD 4K discs don't mount at all — no media detected, drive spins briefly then gives up. Tested on two different movies/discs, so it doesn't seem to be a single bad disc.

My question: Since "Product" still shows as BP50NB40 (not BU40N or BP60NB10), I understand from other threads that this firmware platform can't handle UHD regardless of LibreDrive status. Given my drive already shows "Enabled" natively (not the usual starting point of "Possible, not yet enabled" that most guides assume), which is the correct file/process to cross-flash to BP60NB10 or BU40N?

I found DE_LG_BP60NB10_1.00_MK_HBD.bin in Marty's "All You Need Firmware Pack" and was planning to try a straight WRITE (not RECOVER) with that hybrid file via makemkvcon on macOS (Mac Mini, Apple Silicon) — but wanted to confirm this is correct for an A101 revision specifically before proceeding, since I haven't seen this exact starting state discussed elsewhere.

Thanks in advance for any guidance!

They emailed me and I looked into this further
This drive was fake as the build date was Oct 2025 with svc nb50
If it were real the build date would have been nb52

asmcom wrote: Sat Aug 29, 2026 7:46 am

Billycar11 wrote: Thu Aug 27, 2026 10:37 pm

bb_2023 wrote: Thu Aug 27, 2026 4:11 am Hi all,

Hoping for some guidance before I flash anything, since my drive's starting state doesn't quite match the cases I've found in other threads.

My drive info (from MakeMKV):

Manufacturer: LG
Product: BP50NB40
Revision: A101
Serial number: M60G7F01205
Firmware date: 2116-02-24 11:44
Bus encryption flags: 1F
Highest AACS version: 43

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Original (unpatched)
Firmware version: 0.A101D
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

What's working: Standard Blu-ray discs read and rip perfectly.

What's not working: UHD 4K discs don't mount at all — no media detected, drive spins briefly then gives up. Tested on two different movies/discs, so it doesn't seem to be a single bad disc.

My question: Since "Product" still shows as BP50NB40 (not BU40N or BP60NB10), I understand from other threads that this firmware platform can't handle UHD regardless of LibreDrive status. Given my drive already shows "Enabled" natively (not the usual starting point of "Possible, not yet enabled" that most guides assume), which is the correct file/process to cross-flash to BP60NB10 or BU40N?

I found DE_LG_BP60NB10_1.00_MK_HBD.bin in Marty's "All You Need Firmware Pack" and was planning to try a straight WRITE (not RECOVER) with that hybrid file via makemkvcon on macOS (Mac Mini, Apple Silicon) — but wanted to confirm this is correct for an A101 revision specifically before proceeding, since I haven't seen this exact starting state discussed elsewhere.

Thanks in advance for any guidance!

They emailed me and I looked into this further
This drive was fake as the build date was Oct 2025 with svc nb50
If it were real the build date would have been nb52

Total madness, Billy.

Have you seen the fake BU40Ns as well? A customer of mine sent me one that he had bought on AliExpress for $113 and asked if I could take a look at it because it would hardly read any discs.

It was absolute rubbish. The build quality was poor, and its disc-reading performance was terrible. It's unbelievable how many fake and questionable optical drives are appearing now.

Amazon is becoming a problem, too. We are seeing more and more drives sold there that aren't what they claim to be, especially supposedly genuine BU40N and other UHD-capable drives.

I also asked a friend of mine in Taiwan recently if he could look into whether any new Pioneer drives might still be sitting with distributors somewhere, or perhaps stock that was held back for warranty replacements.

He spoke to a friend of his who worked for Pioneer for many years, and he also confirmed that Pioneer copies are now being sold, some for over £400.

That makes the situation even more worrying. At those prices, most buyers would naturally assume they were purchasing a genuine Pioneer drive, especially when the seller is asking considerably more than the original retail price.

It's becoming dangerous to buy Blu-ray optical drives from some of these marketplaces. A high price and a convincing label or enclosure no longer guarantee you're getting a genuine drive.

Kind Regards

Asmcom

huger33 wrote: Sun Aug 30, 2026 4:13 am BP50NB40 SVC NB40 April 2015
Any updates on whether this drive's firmware can be flashed?

If not, will this ever happen?
If not, does this mean I can't rip UHD, but regular bluray/cds I can?

Billycar11 wrote: Sun Aug 30, 2026 4:20 am

huger33 wrote: Sun Aug 30, 2026 4:13 am BP50NB40 SVC NB40 April 2015
Any updates on whether this drive's firmware can be flashed?

If not, will this ever happen?
If not, does this mean I can't rip UHD, but regular bluray/cds I can?

hug your hopes and dreams of 4k UHD on that drive goodbye

huger33 wrote: Sun Aug 30, 2026 4:39 am

Billycar11 wrote: Sun Aug 30, 2026 4:20 am

huger33 wrote: Sun Aug 30, 2026 4:13 am BP50NB40 SVC NB40 April 2015
Any updates on whether this drive's firmware can be flashed?

If not, will this ever happen?
If not, does this mean I can't rip UHD, but regular bluray/cds I can?

hug your hopes and dreams of 4k UHD on that drive goodbye

Why's that? It doesn't have the mechanical/optical capability or the firmware can't be unlocked yet.