www.makemkv.com

Billycar11 wrote: Thu Oct 16, 2025 6:09 pm

Spycrowsoft wrote: Thu Oct 16, 2025 5:11 pm Since @Billycar11 offers to check...

I have a Verbatim 43888 slim drive with the following MakeMKV drive information:

Code: Select all

Drive Information
OS device name: G:
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.05
Serial number: <redacted>
Firmware date: 2124-04-23 13:47
Bus encryption flags: 17
Highest AACS version: 68

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959

Disc Information
Label: DR_STRANGELOVE
Timestamp: 2020-01-17 11:00:31
Protection: AACS2.0/C v68
Data capacity: 58.69 Gb
Disc type: BD-ROM UHD
Number of layers: 2
Bus encryption flags: 80

So if I understood the video correctly this is the command I need:

Code: Select all

makemkvcon64.exe f --all-yes -d <drive letter> rawflash enc -i <path to LG slim BU40N folder>\HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin

Is that correct for this drive?

yeah looks fine

Spycrowsoft wrote: Mon Oct 20, 2025 8:39 am

Billycar11 wrote: Thu Oct 16, 2025 6:09 pm

Spycrowsoft wrote: Thu Oct 16, 2025 5:11 pm Since @Billycar11 offers to check...

I have a Verbatim 43888 slim drive with the following MakeMKV drive information:

Code: Select all

Drive Information
OS device name: G:
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.05
Serial number: <redacted>
Firmware date: 2124-04-23 13:47
Bus encryption flags: 17
Highest AACS version: 68

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959

Disc Information
Label: DR_STRANGELOVE
Timestamp: 2020-01-17 11:00:31
Protection: AACS2.0/C v68
Data capacity: 58.69 Gb
Disc type: BD-ROM UHD
Number of layers: 2
Bus encryption flags: 80

So if I understood the video correctly this is the command I need:

Code: Select all

makemkvcon64.exe f --all-yes -d <drive letter> rawflash enc -i <path to LG slim BU40N folder>\HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin

Is that correct for this drive?

yeah looks fine

Thanks for your faster than expected reply.
Unfortunately I did not get around to flashing this drive because it failed to burn BD-RE-DL and BD-RE-TL discs in my initial sanity test, so the drive is being returned as DOA. I'll check back in later when I have a replacement, but at least now I know what to do.

Coopervid wrote: Tue Oct 21, 2025 11:04 am

Spycrowsoft wrote: Mon Oct 20, 2025 8:39 am

Billycar11 wrote: Thu Oct 16, 2025 6:09 pm

yeah looks fine

Thanks for your faster than expected reply.
Unfortunately I did not get around to flashing this drive because it failed to burn BD-RE-DL and BD-RE-TL discs in my initial sanity test, so the drive is being returned as DOA. I'll check back in later when I have a replacement, but at least now I know what to do.

You should read this posted by kitahoshi:

https://forum.doom9.org/showthread.php?t=185539&page=19

Coopervid wrote: Tue Oct 21, 2025 4:14 pm No. Only BD-Rs can be burned with spare areas. DVDs can not. However with DVDs you could define where the layer break happens for double-layer discs. Same issue that the quality at the outer edge before switching to the next layer was often bad. With BDs the buner MUST burn to the outer edge but if the burn there is bad this information can be burned to the spare area.

McQueen216 wrote: Tue Oct 21, 2025 6:35 pm I think I've gotten it to flash alright. Drive information below. Windows 11 machine, connected internally, powering down between flashed. Drive shipped with v1.0, I've flashed it to this, that, and every other thing, to include with ASUS_BW-16D1HT_3.10_MK which I am pretty sure it didn't need. Drive manufactured in 2013.
The issue? Doesn't read any discs. I've deleted drivers, and had Win reinstall them fresh. I'm sure it's something small & insignificant & stupid that I've missed, but I've poured through here looking, applying diligence. Goal is to read & rip 4k. Help me, Obi-wan...

Drive Information
OS device name: F:
Manufacturer: HL-DT-ST
Product: BD-RE WH16NS60
Revision: 1.03
Serial number: SIK83D1TE232
Firmware date: 2120-05-08 10:10
Bus encryption flags: 17
Highest AACS version: 16

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.03
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

Coopervid wrote: Tue Oct 21, 2025 6:06 pm You are talking about the software, I was talking about the media.

McQueen216 wrote: Tue Oct 21, 2025 6:35 pm I think I've gotten it to flash alright. Drive information below. Windows 11 machine, connected internally, powering down between flashed. Drive shipped with v1.0, I've flashed it to this, that, and every other thing, to include with ASUS_BW-16D1HT_3.10_MK which I am pretty sure it didn't need. Drive manufactured in 2013.
The issue? Doesn't read any discs. I've deleted drivers, and had Win reinstall them fresh. I'm sure it's something small & insignificant & stupid that I've missed, but I've poured through here looking, applying diligence. Goal is to read & rip 4k. Help me, Obi-wan...

Drive Information
OS device name: F:
Manufacturer: HL-DT-ST
Product: BD-RE WH16NS60
Revision: 1.03
Serial number: SIK83D1TE232
Firmware date: 2120-05-08 10:10
Bus encryption flags: 17
Highest AACS version: 16

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.03
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes