www.makemkv.com

ghostserverd wrote: Fri Dec 01, 2023 8:50 pm

Billycar11 wrote: Fri Dec 01, 2023 7:54 pm It's the hardest of all to flash but it can work but the best Uhd drive are pioneers

Is it hard to flash just because you have to flash it in succession with multiple firmwares like

BP50NB40 to > BP50NB40-NB50-1.03MK then to > BP60NB10 1.02MK or 1.00MK

Or is there something else to be wary of?

Also how can I tell if that one I linked is

svc nb50+ vs svc nb40

to determine if it's flashable or will brick? Or is that something I have to check after I have the drive in hand?

Thanks for your response Billycar. This UHD flashing guide is awesome.

just because it requires multiple.

on the box it should say most are nb52 now

Hello everyone,

Dumb question: I am having an issue using the command line on Mac to flash my drive. Can I flash it on Windows with the GUI, then use it on my Mac?

JTNJ32 wrote: Sat Dec 02, 2023 3:11 pm Hello everyone,

Dumb question: I am having an issue using the command line on Mac to flash my drive. Can I flash it on Windows with the GUI, then use it on my Mac?

Yes

Hi, I need some help flashing my drive. I am not sure what to do. I have tried SDFFlash tool and it comes up with the same error each time.

Drive Information
OS device name: D:
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.04
Serial number: MO4N7I93554
Firmware date: 2120-05-06 11:42
Bus encryption flags: 17
Highest AACS version: 62

LibreDrive Information
Status: Possible (with patched firmware)
Drive platform: MT1959
Harware support: Yes
Firmware support: No
Firmware type: Original (patched version available)
Firmware version: 1.04
DVD all regions: Possible (with patched firmware)
BD raw data read: Possible (with patched firmware)

Any help please would be much appreciated.
BD raw metadata read: Possible (with patched firmware)
Unrestricted read speed: Possible (with patched firmware)

MacPerry wrote: Sat Dec 02, 2023 10:12 pm Hi, I need some help flashing my drive. I am not sure what to do. I have tried SDFFlash tool and it comes up with the same error each time.

what would that error be?
what fw are you trying to flash ?
did you use enc?

Billycar11 wrote: Sat Dec 02, 2023 9:44 pm

JTNJ32 wrote: Sat Dec 02, 2023 3:11 pm Hello everyone,

Dumb question: I am having an issue using the command line on Mac to flash my drive. Can I flash it on Windows with the GUI, then use it on my Mac?

Yes

Thank you! Works perfectly.

Ordered an wh16ns40 on amazon. Was able to flash to firmware 1.02 using the youtube video link. it says libre drive is enabled and i'm on mt1959. When i put a disc into the drive, it doesn't recognize it however. It doesn't recognize blu-rays either. i forgot to put a bluray in when i first received the drive. Any suggestions? Or is this a dead drive?

I'm connected via this external sata adapter w/usb plug and separate power cable. Here's the link: https://www.amazon.com/gp/product/B00MV ... =UTF8&th=1

Drive Information
OS device name: E:
Manufacturer: HL-DT-ST
Product: BD-RE WH16NS60
Revision: 1.02
Serial number: KLZN8SJ3617
Firmware date: 2118-10-29 19:36
Bus encryption flags: 17
Highest AACS version: 81

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.02
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

omk1980 wrote: Thu Dec 07, 2023 9:36 pm Ordered an wh16ns40 on amazon. Was able to flash to firmware 1.02 using the youtube video link. it says libre drive is enabled and i'm on mt1959. When i put a disc into the drive, it doesn't recognize it however. Any suggestions? I'm connected via an external sata adapter w/usb plug and separate power cable.

Is it one of the recommend adapters not all powered adapters support optical drives

And what's the build date on the drive case

Billycar11 wrote: Thu Dec 07, 2023 9:47 pm

omk1980 wrote: Thu Dec 07, 2023 9:36 pm Ordered an wh16ns40 on amazon. Was able to flash to firmware 1.02 using the youtube video link. it says libre drive is enabled and i'm on mt1959. When i put a disc into the drive, it doesn't recognize it however. Any suggestions? I'm connected via an external sata adapter w/usb plug and separate power cable.

Is it one of the recommend adapters not all powered adapters support optical drives

And what's the build date on the drive case

Build date is 8/28/2023.

I've updated post w/link and drive profile

omk1980 wrote: Thu Dec 07, 2023 9:49 pm

Billycar11 wrote: Thu Dec 07, 2023 9:47 pm

omk1980 wrote: Thu Dec 07, 2023 9:36 pm Ordered an wh16ns40 on amazon. Was able to flash to firmware 1.02 using the youtube video link. it says libre drive is enabled and i'm on mt1959. When i put a disc into the drive, it doesn't recognize it however. Any suggestions? I'm connected via an external sata adapter w/usb plug and separate power cable.

Is it one of the recommend adapters not all powered adapters support optical drives

And what's the build date on the drive case

Build date is 8/28/2023.

I've updated post w/link and drive profile

It's probably the adapters did it work before you flashed it?
Get one of the recommend ones if not first post has some

Billycar11 wrote: Thu Dec 07, 2023 9:53 pm

omk1980 wrote: Thu Dec 07, 2023 9:49 pm

Billycar11 wrote: Thu Dec 07, 2023 9:47 pm

Is it one of the recommend adapters not all powered adapters support optical drives

And what's the build date on the drive case

Build date is 8/28/2023.

I've updated post w/link and drive profile

It's probably the adapters did it work before you flashed it?
Get one of the recommend ones if not first post has some

I didn't get a chance to try it w/a bluray before flashing.

Billycar11 wrote: Thu Dec 07, 2023 9:53 pm

omk1980 wrote: Thu Dec 07, 2023 9:49 pm

Billycar11 wrote: Thu Dec 07, 2023 9:47 pm

Is it one of the recommend adapters not all powered adapters support optical drives

And what's the build date on the drive case

Build date is 8/28/2023.

I've updated post w/link and drive profile

It's probably the adapters did it work before you flashed it?
Get one of the recommend ones if not first post has some

yeah, looks to be the adapte.r plugged it directly into my PC and it's recognizing the disk. ripping now. Hoping it works ok

I just retrieved an Asus BC-12D2HT with firmware 3.00, manufactured early 2016. It looks like it's UHD friendly out of the box... are there any good reasons to flash it to a newer firmware such as 3.11_MK, or should I stay with 3.00 ?

_nmd_ wrote: Sat Dec 09, 2023 6:54 pm I just retrieved an Asus BC-12D2HT with firmware 3.00, manufactured early 2016. It looks like it's UHD friendly out of the box... are there any good reasons to flash it to a newer firmware such as 3.11_MK, or should I stay with 3.00 ?

Nope. Leave it alone.

MartyMcNuts wrote: Sat Dec 09, 2023 10:03 pm Nope. Leave it alone.

Thanks!