SDFtool Flasher

[Billycar11]

hello all, I use dvdfab so i tried to flash my new LGns55 to LGns60_1.00_bin and got error code: 0x82052603.

Any suggestion, please help...

follow the guide below flashing sequence if its not follow it wont work.

i made it for a reason guys... please read it this has been asked to many times

[blake]

Hi guys!

I purchased an LG BP50NB40 NB52, and followed the instructions to flash and cross flash. But it would not read any BD or UHD BD disc. So I tried to flash another version and attempt recovery, but at this point it seems to be bricked as the tray will not open now, and I get error 0xff05c103. MakeMKV shows No disk and the tray open. When I try to write or recover, it finishes fast 'Done' but doesn't seem to do anything.

BD Drive shows: HL-DT-ST_BD-RE_BP50NB40_1.00_211409031732_XXXXXXXXXX

MakeMKV BETA 1.17.7:
Drive Information
OS device name: G:
Manufacturer: HL-DT-ST
Product: BD-RE BP50NB40
Revision: 1.00
Serial number: XXXXXXXXXXX
Firmware date: 2114-09-03 17:32
Bus encryption flags: 17

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Original (unpatched)
Firmware version: 1.00
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

No disc inserted

Any suggestions are appreciated!

[Billycar11]

Hi guys!

I purchased an LG BP50NB40 NB52, and followed the instructions to flash and cross flash. But it would not read any BD or UHD BD disc. So I tried to flash another version and attempt recovery, but at this point it seems to be bricked as the tray will not open now, and I get error 0xff05c103. MakeMKV shows No disk and the tray open. When I try to write or recover, it finishes fast 'Done' but doesn't seem to do anything.

BD Drive shows: HL-DT-ST_BD-RE_BP50NB40_1.00_211409031732_XXXXXXXXXX

MakeMKV BETA 1.17.7:
Drive Information
OS device name: G:
Manufacturer: HL-DT-ST
Product: BD-RE BP50NB40
Revision: 1.00
Serial number: XXXXXXXXXXX
Firmware date: 2114-09-03 17:32
Bus encryption flags: 17

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Original (unpatched)
Firmware version: 1.00
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

No disc inserted

Any suggestions are appreciated!

Email me I may be able to help you unbrick it

[erizock]

Yes! It seemed to have worked!!!...

Last login: Wed May 15 07:45:37 on ttys000
ericober@Erics-MacBook-Pro ~ % cd /Applications/MakeMKV.app/Contents/MacOS
ericober@Erics-MacBook-Pro MacOS % ./makemkvcon f -l
Found 1 drives(s)
00: /IOBDServices/4C20AED2
ASUS_BW-16D1HT_3.11_212012011759_KLZNBHD4945

ericober@Erics-MacBook-Pro MacOS % ./makemkvcon f -d '/IOBDServices/4C20AED2' -f '/Users/ericober/Desktop/ASUS firmware/sdf.bin' rawflash enc -i '/Users/ericober/Desktop/ASUS firmware/DE_ASUS_BW-16D1HT_3.10_MK.bin'

Reading input file /Users/ericober/Desktop/ASUS firmware/DE_ASUS_BW-16D1HT_3.10_MK.bin
Flashing flags = 0x0 : 0 0 0 0 : ---- ---- ---- ----
Sending image in encrypted format
Current Drive ID: ASUS_BW-16D1HT_3.11_212012011759_KLZNBHD4945
Ready to write drive flash memory.
Type "yes" to continue, "no" to abort
yes
Operation started: Sending flash image to drive
100% Operation finished
Operation started: Programming flash
100% Operation finished

Program Flash NG 06/29/00

Command produced error code 0x82062900
ericober@Erics-MacBook-Pro MacOS %

I don't have worry about this error code, right? "Command produced error code 0x82062900"

BIG THANKS TO TO d00zah, dcoke22, and of course MartyMCNuts. Appreciate this community helping a newbie. Now to get ripping!

Hi again-
Well, everything worked until last night, and now the drive doesn't read discs of any type. Every time I load a disc (be it DVD, BD or UHD) it spins for 10 seconds and then says there is "No disc". I am on Mac and have used Terminal commands (see my last post from May up above). Please help @d00zah, @dcoke22, and of course @MartyMCNuts!

[Billycar11]

Hi again-
Well, everything worked until last night, and now the drive doesn't read discs of any type. Every time I load a disc (be it DVD, BD or UHD) it spins for 10 seconds and then says there is "No disc". I am on Mac and have used Terminal commands (see my last post from May up above). Please help @d00zah, @dcoke22, and of course @MartyMCNuts!

this is very common for lg/asus drives this is why pioneers are the recommended drives.

pull power for a min then reconnect and try again reboot pc to it that dont work after 2 times its dead

[rimmi2002]

Hi I am trying to Flash my LG BD-RE WH14NS40 drive to rip 4K DVDs. The drive is installed on PC running windows 10. Internal Drive. My current drive firmware is 1.03.
I read through the forums.

1. Downloaded SDFtool Flashes 1.3.5 to flash HL-DT-ST-BD-RE_WH16NS60-1.02-NM00100-211810291936.bin

I am having a few issues and was wondering if someone can help.

1. When I launch SDFtool the window is all scrunched up. I can see MT1959 text and encrypted txt but can't see its status. When I click the Read or write button I get the following error: "The Drive you have selected does not have the correct drive platform (MT1959) and cannot be flashed. Under MakerMKV it shows the platform at MT1939. So is this drive not patchable?

Thanks.

[d00zah]

I am having a few issues and was wondering if someone can help.

1. When I launch SDFtool the window is all scrunched up. I can see MT1959 text and encrypted txt but can't see its status. When I click the Read or write button I get the following error: "The Drive you have selected does not have the correct drive platform (MT1959) and cannot be flashed. Under MakerMKV it shows the platform at MT1939. So is this drive not patchable?

Thanks.

viewtopic.php?p=114370#p114370