i just realised....
when i mux hevc file from ys's tool with mkvtoolnix, makemkv recognizes this as dvhe.07.00, BL+RPU, but created mkv is dvhe.07.00, EL+RPU in mediainfo... this is known thing...
but when i ran THAT mkv through makemkv again, makemkv recognise the mkv correctly, as dvhe.07.06, BL+FEL+RPU, and outputted MKV is also correct... dvhe.07.06, BL+EL+RPU in mediainfo. so mkv_patcher is "not needed"... but requires more space and time.
Dolby Vision now possible through MP4 Mux.
Re: Dolby Vision now possible through MP4 Mux.
Last edited by jlpsvk on Wed Oct 21, 2020 1:49 am, edited 1 time in total.
Re: Dolby Vision now possible through MP4 Mux.
Buzzie ..re adding atmos audio back in
heres my round about method
basicclly make the mkv from full uhd rip with makemkv
using mkvtoolnix gui ,add in that resultant mkv files then select what you want to keep...in this case the atmos tracks and maybe subs ,thatt will save as an mka files
go thru all the normal steps now with ys tool untill the very end when were back to making the final mkv
now just add the final makemkv file with the mka file ,back in mkvtoolnix gui and your back to full atmos and dv
ie did this fine FINALLY on terminator Dark genesis..changing the FEL down to a MEL 8 with atmos
but same with the mel 7s
after 4 -7 mins movie starts to stutter ,and audio goes out of synch by 2 secs
i beleive this is issue at chapter breaks
ie Alita mel 7 starts fine DV and atmos looks great...4 5 mins in movie goes out of synch and audio lags by at least 2 secs
If i slide the movie forward a bit it all resysnches for a few mins and then goes back out of synch ,and audio out by 2 secs again ...and happens each time i slide forward
and each time if i check theres a new chapter up
This is on Zidoo Z9X ,sony DN 1080 amp ,Panasonic Z1000 OLED
hope this helps some
heres my round about method
basicclly make the mkv from full uhd rip with makemkv
using mkvtoolnix gui ,add in that resultant mkv files then select what you want to keep...in this case the atmos tracks and maybe subs ,thatt will save as an mka files
go thru all the normal steps now with ys tool untill the very end when were back to making the final mkv
now just add the final makemkv file with the mka file ,back in mkvtoolnix gui and your back to full atmos and dv
ie did this fine FINALLY on terminator Dark genesis..changing the FEL down to a MEL 8 with atmos
but same with the mel 7s
after 4 -7 mins movie starts to stutter ,and audio goes out of synch by 2 secs
i beleive this is issue at chapter breaks
ie Alita mel 7 starts fine DV and atmos looks great...4 5 mins in movie goes out of synch and audio lags by at least 2 secs
If i slide the movie forward a bit it all resysnches for a few mins and then goes back out of synch ,and audio out by 2 secs again ...and happens each time i slide forward
and each time if i check theres a new chapter up
This is on Zidoo Z9X ,sony DN 1080 amp ,Panasonic Z1000 OLED
hope this helps some
Re: Dolby Vision now possible through MP4 Mux.
Sample DoVi video shot on iPhone 12, it is profile 8.1, with HLG compatibility.badrobot wrote: ↑Wed Oct 14, 2020 1:03 amThe new launched iPhone 12 can produce Dolby Vision Video. So we can have more DoVi videos created by official proven method.
The iPhone 12 spec says:Code: Select all
HDR video recording with Dolby Vision up to 30 fps
Code: Select all
General
Complete name : /Users/hongyushi/Movies/iPhone 12 Pro 杜比视界样片.mov
Format : MPEG-4
Format profile : QuickTime
Codec ID : qt 0000.00 (qt )
File size : 238 MiB
Duration : 47 s 147 ms
Overall bit rate mode : Variable
Overall bit rate : 42.3 Mb/s
Encoded date : UTC 2020-10-17 12:55:31
Tagged date : UTC 2020-10-17 12:56:19
Writing library : Apple QuickTime
com.apple.quicktime.location.accuracy.ho : 228.095906
com.apple.quicktime.location.ISO6709 : +23.1371+113.3256+025.978/
com.apple.quicktime.make : Apple
com.apple.quicktime.model : iPhone 12 Pro
com.apple.quicktime.software : 14.1
com.apple.quicktime.creationdate : 2020-10-17T20:55:31+0800
Video
ID : 1
Format : HEVC
Format/Info : High Efficiency Video Coding
Format profile : Main 10@L5.1@High
HDR format : Dolby Vision, Version 1.0, dvhe.08.0A, BL+RPU, HLG compatible
Codec ID : hvc1
Codec ID/Info : High Efficiency Video Coding
Duration : 47 s 145 ms
Bit rate : 42.0 Mb/s
Width : 3 840 pixels
Height : 2 160 pixels
Display aspect ratio : 16:9
Frame rate mode : Variable
Frame rate : 45.008 FPS
Minimum frame rate : 28.571 FPS
Maximum frame rate : 60.000 FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 10 bits
Bits/(Pixel*Frame) : 0.113
Stream size : 236 MiB (99%)
Title : Core Media Video
Encoded date : UTC 2020-10-17 12:55:31
Tagged date : UTC 2020-10-17 12:56:19
Color range : Limited
Color primaries : BT.2020
Transfer characteristics : HLG
Matrix coefficients : BT.2020 non-constant
Codec configuration box : hvcC+dvvC
Audio
ID : 2
Format : AAC LC
Format/Info : Advanced Audio Codec Low Complexity
Codec ID : mp4a-40-2
Duration : 47 s 145 ms
Source duration : 47 s 206 ms
Bit rate mode : Variable
Bit rate : 181 kb/s
Channel(s) : 2 channels
Channel layout : L R
Sampling rate : 44.1 kHz
Frame rate : 43.066 FPS (1024 SPF)
Compression mode : Lossy
Stream size : 1.02 MiB (0%)
Source stream size : 1.02 MiB (0%)
Title : Core Media Audio
Encoded date : UTC 2020-10-17 12:55:31
Tagged date : UTC 2020-10-17 12:56:19
Other #1
Type : meta
Duration : 47 s 147 ms
Bit rate mode : Constant
Other #2
Type : meta
Duration : 47 s 147 ms
Bit rate mode : Constant
Other #3
Type : meta
Duration : 47 s 147 ms
Bit rate mode : Variable
Re: Dolby Vision now possible through MP4 Mux.
Thanks for the reply.cuculain wrote: ↑Tue Oct 20, 2020 8:28 pmBuzzie ..re adding atmos audio back in
heres my round about method
basicclly make the mkv from full uhd rip with makemkv
using mkvtoolnix gui ,add in that resultant mkv files then select what you want to keep...in this case the atmos tracks and maybe subs ,thatt will save as an mka files
go thru all the normal steps now with ys tool untill the very end when were back to making the final mkv
now just add the final makemkv file with the mka file ,back in mkvtoolnix gui and your back to full atmos and dv
ie did this fine FINALLY on terminator Dark genesis..changing the FEL down to a MEL 8 with atmos
but same with the mel 7s
after 4 -7 mins movie starts to stutter ,and audio goes out of synch by 2 secs
i beleive this is issue at chapter breaks
ie Alita mel 7 starts fine DV and atmos looks great...4 5 mins in movie goes out of synch and audio lags by at least 2 secs
If i slide the movie forward a bit it all resysnches for a few mins and then goes back out of synch ,and audio out by 2 secs again ...and happens each time i slide forward
and each time if i check theres a new chapter up
This is on Zidoo Z9X ,sony DN 1080 amp ,Panasonic Z1000 OLED
hope this helps some
I will look at it
Re: Dolby Vision now possible through MP4 Mux.
Ok Guys,
I have another question.
I have the full UHD rips of the BTTF Trilogy
I decided to put it in MakeMKV (latest version) and made an MKV. I kept the video ofcourse (only showed the DV file) and the atmos/truehd and ac3 track with subs
When it was done i fired up Mediainfo and it showed the following :
I started the movie on my Shield 2019 Pro.
Plex showed HDR with Dolby Atmos
Kodi, with altered (i think) exoplayer as default player, played Dolby Vision with Dolby Atmos.
Plex on my LG C9 TV played only in HDR with AC3 sound. With TrueHD on i could not play it but that is my settings somewhere i think.
I only started the movie so i dont know if there are any OutOfSync issues.
Any idea why i dont see 2 video?
normally there are 2 video right?
Is it a good rip/remux?
I did not use any other tools.
I have another question.
I have the full UHD rips of the BTTF Trilogy
I decided to put it in MakeMKV (latest version) and made an MKV. I kept the video ofcourse (only showed the DV file) and the atmos/truehd and ac3 track with subs
When it was done i fired up Mediainfo and it showed the following :
Code: Select all
General
Unique ID : 295946655838674587133456066759437926418 (0xDEA540AD2706E8C288536817A7FD4012)
Complete name : D:\BTFF2\Back to the Future Part II_t00.mkv
Format : Matroska
Format version : Version 2
File size : 67.7 GiB
Duration : 1 h 48 min
Overall bit rate mode : Variable
Overall bit rate : 89.7 Mb/s
Movie name : Back to the Future Part II
Encoded date : UTC 2020-10-20 22:18:16
Writing application : MakeMKV v1.15.3 win(x64-release)
Writing library : libmakemkv v1.15.3 (1.3.10/1.5.2) win(x64-release)
Video
ID : 1
ID in the original source medium : 4113 (0x1011)
Format : HEVC
Format/Info : High Efficiency Video Coding
Format profile : Main 10@L5.1@High
HDR format : Dolby Vision, Version 1.0, dvhe.07.06, BL+EL+RPU, Blu-ray compatible / SMPTE ST 2094 App 4, Version 1, HDR10+ Profile B compatible
Codec ID : V_MPEGH/ISO/HEVC
Duration : 1 h 48 min
Bit rate : 84.6 Mb/s
Width : 3 840 pixels
Height : 2 160 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 (24000/1001) FPS
Color space : YUV
Chroma subsampling : 4:2:0 (Type 2)
Bit depth : 10 bits
Bits/(Pixel*Frame) : 0.425
Stream size : 63.8 GiB (94%)
Language : English
Default : No
Forced : No
Color range : Limited
Color primaries : BT.2020
Transfer characteristics : PQ
Matrix coefficients : BT.2020 non-constant
Mastering display color primaries : Display P3
Mastering display luminance : min: 0.0050 cd/m2, max: 4000 cd/m2
Maximum Content Light Level : 1000 cd/m2
Maximum Frame-Average Light Level : 606 cd/m2
Original source medium : Blu-ray
Audio #1
ID : 2
ID in the original source medium : 4352 (0x1100)
Format : MLP FBA 16-ch
Format/Info : Meridian Lossless Packing FBA with 16-channel presentation
Commercial name : Dolby TrueHD with Dolby Atmos
Codec ID : A_TRUEHD
Duration : 1 h 48 min
Bit rate mode : Variable
Bit rate : 4 602 kb/s
Maximum bit rate : 6 954 kb/s
Channel(s) : 8 channels
Channel layout : L R C LFE Ls Rs Lb Rb
Sampling rate : 48.0 kHz
Frame rate : 1 200.000 FPS (40 SPF)
Bit depth : 24 bits
Compression mode : Lossless
Stream size : 3.47 GiB (5%)
Title : Surround 7.1
Language : English
Default : Yes
Forced : No
Original source medium : Blu-ray
Number of dynamic objects : 11
Bed channel count : 1 channel
Bed channel configuration : LFE
Audio #2
ID : 3
ID in the original source medium : 4352 (0x1100)
Format : AC-3
Format/Info : Audio Coding 3
Commercial name : Dolby Digital
Codec ID : A_AC3
Duration : 1 h 48 min
Bit rate mode : Constant
Bit rate : 448 kb/s
Channel(s) : 6 channels
Channel layout : L R C LFE Ls Rs
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 SPF)
Compression mode : Lossy
Stream size : 346 MiB (0%)
Title : Surround 5.1
Language : English
Service kind : Complete Main
Default : No
Forced : No
Original source medium : Blu-ray
Text #1
ID : 4
ID in the original source medium : 4768 (0x12A0)
Format : PGS
Codec ID : S_HDMV/PGS
Codec ID/Info : Picture based subtitle format used on BDs/HD-DVDs
Duration : 1 h 42 min
Bit rate : 46.8 kb/s
Count of elements : 3312
Stream size : 34.3 MiB (0%)
Language : English
Default : No
Forced : No
Original source medium : Blu-ray
Text #2
ID : 6
ID in the original source medium : 4771 (0x12A3)
Format : PGS
Codec ID : S_HDMV/PGS
Codec ID/Info : Picture based subtitle format used on BDs/HD-DVDs
Duration : 1 h 42 min
Bit rate : 985 b/s
Count of elements : 76
Stream size : 743 KiB (0%)
Language : Spanish
Default : No
Forced : No
Original source medium : Blu-ray
Menu
00:00:00.000 : en:Chapter 01
00:02:58.511 : en:Chapter 02
00:04:18.216 : en:Chapter 03
00:12:45.389 : en:Chapter 04
00:17:10.112 : en:Chapter 05
00:21:17.359 : en:Chapter 06
00:27:00.660 : en:Chapter 07
00:34:16.429 : en:Chapter 08
00:38:33.311 : en:Chapter 09
00:46:14.062 : en:Chapter 10
00:50:36.450 : en:Chapter 11
00:55:33.621 : en:Chapter 12
01:01:30.770 : en:Chapter 13
01:07:15.197 : en:Chapter 14
01:14:46.940 : en:Chapter 15
01:28:01.276 : en:Chapter 16
01:34:44.261 : en:Chapter 17
01:37:47.027 : en:Chapter 18
01:40:38.240 : en:Chapter 19
01:43:26.325 : en:Chapter 20
Plex showed HDR with Dolby Atmos
Kodi, with altered (i think) exoplayer as default player, played Dolby Vision with Dolby Atmos.
Plex on my LG C9 TV played only in HDR with AC3 sound. With TrueHD on i could not play it but that is my settings somewhere i think.
I only started the movie so i dont know if there are any OutOfSync issues.
Any idea why i dont see 2 video?
normally there are 2 video right?
Is it a good rip/remux?
I did not use any other tools.
Re: Dolby Vision now possible through MP4 Mux.
Check Plex player and Plex Server versions.
Does Plex Server detect DoVi data? Check file info in Plex server.
Bravia XF90, Shield TV Pro'19, UBP-X700
Re: Dolby Vision now possible through MP4 Mux.
mediainfo shows:jlpsvk wrote: ↑Tue Oct 20, 2020 11:01 amI relly don't know, what you are talking about... info from MakeMKV on Birds of Preyand info from DVDfab 12.0.0.3Code: Select all
Track information Type: Video Codec: MpegH HEVC Main10@L5.1 (dvhe.07.06 BL+MEL+RPU) Resolution: 3840x2160 Aspect ratio: 16:9 Frame rate: 23.976 (24000/1001)Code: Select all
VIDEO: Codec Bitrate Description ----- ------- ----------- MPEG-H HEVC Video 59863 kbps 2160p / 23.976 fps / 16:9 / Main 10 @ Level 5.1 @ High / 4:2:0 / 10 bits / 4000nits / HDR10+ v1 Profile B / BT.2020 * MPEG-H HEVC Video 65 kbps (0.11%) 1080p / 23.976 fps / 16:9 / Main 10 @ Level 5.1 @ High / 4:2:0 / 10 bits / 4000nits / Dolby Vision MEL / BT.2020
Dolby Vision, Version 1.0, dvhe.07.06, BL+EL+RPU, Blu-ray compatible / SMPTE ST 2094 App 4, Version 1, HDR10+ Profile B compatible
Re: Dolby Vision now possible through MP4 Mux.
Thanks for the reply.
I checked the versions
Plex Player is latest version : 8.7.2.20952
Plex server is also latest version : 1.20.3.3437
After re-anilysing the file it showed the DoVi data. But playing the file was still in HDR
Re: Dolby Vision now possible through MP4 Mux.
I thought the Apple TV 4K only supported profile 5? Or can it also do profile 8.1? If it can’t do profile 8.1 now I’d expect it to come in an update very soon?HongyuS wrote: ↑Wed Oct 21, 2020 7:23 amSample DoVi video shot on iPhone 12, it is profile 8.1, with HLG compatibility.badrobot wrote: ↑Wed Oct 14, 2020 1:03 amThe new launched iPhone 12 can produce Dolby Vision Video. So we can have more DoVi videos created by official proven method.
The iPhone 12 spec says:Code: Select all
HDR video recording with Dolby Vision up to 30 fps
Code: Select all
General Complete name : /Users/hongyushi/Movies/iPhone 12 Pro 杜比视界样片.mov Format : MPEG-4 Format profile : QuickTime Codec ID : qt 0000.00 (qt ) File size : 238 MiB Duration : 47 s 147 ms Overall bit rate mode : Variable Overall bit rate : 42.3 Mb/s Encoded date : UTC 2020-10-17 12:55:31 Tagged date : UTC 2020-10-17 12:56:19 Writing library : Apple QuickTime com.apple.quicktime.location.accuracy.ho : 228.095906 com.apple.quicktime.location.ISO6709 : +23.1371+113.3256+025.978/ com.apple.quicktime.make : Apple com.apple.quicktime.model : iPhone 12 Pro com.apple.quicktime.software : 14.1 com.apple.quicktime.creationdate : 2020-10-17T20:55:31+0800 Video ID : 1 Format : HEVC Format/Info : High Efficiency Video Coding Format profile : Main 10@L5.1@High HDR format : Dolby Vision, Version 1.0, dvhe.08.0A, BL+RPU, HLG compatible Codec ID : hvc1 Codec ID/Info : High Efficiency Video Coding Duration : 47 s 145 ms Bit rate : 42.0 Mb/s Width : 3 840 pixels Height : 2 160 pixels Display aspect ratio : 16:9 Frame rate mode : Variable Frame rate : 45.008 FPS Minimum frame rate : 28.571 FPS Maximum frame rate : 60.000 FPS Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 10 bits Bits/(Pixel*Frame) : 0.113 Stream size : 236 MiB (99%) Title : Core Media Video Encoded date : UTC 2020-10-17 12:55:31 Tagged date : UTC 2020-10-17 12:56:19 Color range : Limited Color primaries : BT.2020 Transfer characteristics : HLG Matrix coefficients : BT.2020 non-constant Codec configuration box : hvcC+dvvC Audio ID : 2 Format : AAC LC Format/Info : Advanced Audio Codec Low Complexity Codec ID : mp4a-40-2 Duration : 47 s 145 ms Source duration : 47 s 206 ms Bit rate mode : Variable Bit rate : 181 kb/s Channel(s) : 2 channels Channel layout : L R Sampling rate : 44.1 kHz Frame rate : 43.066 FPS (1024 SPF) Compression mode : Lossy Stream size : 1.02 MiB (0%) Source stream size : 1.02 MiB (0%) Title : Core Media Audio Encoded date : UTC 2020-10-17 12:55:31 Tagged date : UTC 2020-10-17 12:56:19 Other #1 Type : meta Duration : 47 s 147 ms Bit rate mode : Constant Other #2 Type : meta Duration : 47 s 147 ms Bit rate mode : Constant Other #3 Type : meta Duration : 47 s 147 ms Bit rate mode : Variable
Looking at the specs, it does seem Apple TV is listed as profile 5 only, so ???? How is that going to work when airplaying etc? HDR only or do you think it will convert on the fly.
Pretty annoying if the video you shoot on your new phone can’t be played back in Dolby vision on the 4k ATV. Then again, there is suppose to be a new one coming in the next 5 months
Re: Dolby Vision now possible through MP4 Mux.
You need the latest 8.8 version of plex. If you weren’t on the beta, i think the public releases just came out today.Buzzie wrote: ↑Wed Oct 21, 2020 8:01 pmThanks for the reply.
I checked the versions
Plex Player is latest version : 8.7.2.20952
Plex server is also latest version : 1.20.3.3437
After re-anilysing the file it showed the DoVi data. But playing the file was still in HDR
Re: Dolby Vision now possible through MP4 Mux.
The iPhone 12 review from Verge says DoVi type 8.4HongyuS wrote: ↑Wed Oct 21, 2020 7:23 amSample DoVi video shot on iPhone 12, it is profile 8.1, with HLG compatibility.badrobot wrote: ↑Wed Oct 14, 2020 1:03 amThe new launched iPhone 12 can produce Dolby Vision Video. So we can have more DoVi videos created by official proven method.
The iPhone 12 spec says:Code: Select all
HDR video recording with Dolby Vision up to 30 fps
Code: Select all
General Complete name : /Users/hongyushi/Movies/iPhone 12 Pro 杜比视界样片.mov Format : MPEG-4 Format profile : QuickTime Codec ID : qt 0000.00 (qt ) File size : 238 MiB Duration : 47 s 147 ms Overall bit rate mode : Variable Overall bit rate : 42.3 Mb/s Encoded date : UTC 2020-10-17 12:55:31 Tagged date : UTC 2020-10-17 12:56:19 Writing library : Apple QuickTime com.apple.quicktime.location.accuracy.ho : 228.095906 com.apple.quicktime.location.ISO6709 : +23.1371+113.3256+025.978/ com.apple.quicktime.make : Apple com.apple.quicktime.model : iPhone 12 Pro com.apple.quicktime.software : 14.1 com.apple.quicktime.creationdate : 2020-10-17T20:55:31+0800 Video ID : 1 Format : HEVC Format/Info : High Efficiency Video Coding Format profile : Main 10@L5.1@High HDR format : Dolby Vision, Version 1.0, dvhe.08.0A, BL+RPU, HLG compatible Codec ID : hvc1 Codec ID/Info : High Efficiency Video Coding Duration : 47 s 145 ms Bit rate : 42.0 Mb/s Width : 3 840 pixels Height : 2 160 pixels Display aspect ratio : 16:9 Frame rate mode : Variable Frame rate : 45.008 FPS Minimum frame rate : 28.571 FPS Maximum frame rate : 60.000 FPS Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 10 bits Bits/(Pixel*Frame) : 0.113 Stream size : 236 MiB (99%) Title : Core Media Video Encoded date : UTC 2020-10-17 12:55:31 Tagged date : UTC 2020-10-17 12:56:19 Color range : Limited Color primaries : BT.2020 Transfer characteristics : HLG Matrix coefficients : BT.2020 non-constant Codec configuration box : hvcC+dvvC Audio ID : 2 Format : AAC LC Format/Info : Advanced Audio Codec Low Complexity Codec ID : mp4a-40-2 Duration : 47 s 145 ms Source duration : 47 s 206 ms Bit rate mode : Variable Bit rate : 181 kb/s Channel(s) : 2 channels Channel layout : L R Sampling rate : 44.1 kHz Frame rate : 43.066 FPS (1024 SPF) Compression mode : Lossy Stream size : 1.02 MiB (0%) Source stream size : 1.02 MiB (0%) Title : Core Media Audio Encoded date : UTC 2020-10-17 12:55:31 Tagged date : UTC 2020-10-17 12:56:19 Other #1 Type : meta Duration : 47 s 147 ms Bit rate mode : Constant Other #2 Type : meta Duration : 47 s 147 ms Bit rate mode : Constant Other #3 Type : meta Duration : 47 s 147 ms Bit rate mode : Variable
https://www.theverge.com/21524288/apple ... pro-review
Could you plz upload the sample video file to mega.nz or google drive, I want to test it on shield tv 2019.But the iPhone 12 shoots video in a newer version of Dolby Vision called Profile 8.4 that’s built on a standard called HLG, or hybrid log-gamma. HLG works differently than PQ systems; it was developed by broadcasters like the BBC and NHK to be backwards compatible with SDR displays so they would only have to broadcast one video stream.
One more thing, are you Chinese? Mr Hong? I am from Mainland of China.
I am not a native English speaker.
Sorry for my bad English.
Sorry for my bad English.
Re: Dolby Vision now possible through MP4 Mux.
Thanks a lot for the info!
Looks like this profile is pretty new, not even specified in the Dolby Vision profiles/levels doc (which updated last year).
Here is a link of the original file:
https://drive.google.com/file/d/1JsFd_K ... sp=sharing
The video is not shot by me. I got it from another group on Bilibili (see "BV1rv411k7GL").
Yes, I'm also from mainland China.
Re: Dolby Vision now possible through MP4 Mux.
Thanks....gonna download that one tonight and see if it works.shawnc22 wrote: ↑Wed Oct 21, 2020 10:14 pmYou need the latest 8.8 version of plex. If you weren’t on the beta, i think the public releases just came out today.
EDIT: Update Plex app to 8.8 and worked indeed. Thanks!!
Last edited by Buzzie on Thu Oct 22, 2020 7:05 pm, edited 1 time in total.