If you give me your test files,i'm more then willing too test them,
Same for everybody else
If you give me your test files,i'm more then willing too test them,
Okay so what I should do is:RESET_9999 wrote: ↑Tue Mar 03, 2020 11:14 pmyep, this happened to me when I tried to remux a DL DV MP4 to DV TS. my fix was to demux the mp4 first with ''dlb_mp4demux'' and then build a new TS.
Thank you for the clarification, I'll give it a tryRESET_9999 wrote: ↑Wed Mar 04, 2020 12:04 am-if you're working with original m2ts from uhd-bd, you should remux to DV TS directly in tsMuxer. No mp4muxer needed.
-if you're working with DV MP4: on my end, because I also experienced the washed-out picture with grey black bars, I started using the mp4demuxer to demux first and then use the raw hevc layers to build a new DV TS with Atmos.
https://github.com/DolbyLaboratories/dlb_mp4demux
-personally I'm now using the newest tsmuxer with no DV descriptor in the HDR10 layer.
this one: https://drive.google.com/open?id=1Gq5TA ... B1io4OwHW9
What commands do I use in the Dolby DemuxerRESET_9999 wrote: ↑Wed Mar 04, 2020 12:04 am-if you're working with original m2ts from uhd-bd, you should remux to DV TS directly in tsMuxer. No mp4muxer needed.
-if you're working with DV MP4: on my end, because I also experienced the washed-out picture with grey black bars, I started using the mp4demuxer to demux first and then use the raw hevc layers to build a new DV TS with Atmos.
https://github.com/DolbyLaboratories/dlb_mp4demux
-personally I'm now using the newest tsmuxer with no DV descriptor in the HDR10 layer.
this one: https://drive.google.com/open?id=1Gq5TA ... B1io4OwHW9
Code: Select all
mp4demuxer_64bits.exe --input-file E:\DV.mp4
have you tried a dual layer mkv remux at all? curious if demuxing it (gMKVExtractGUI) and making a ts from the two hevc and thd atmos files play properly on the x700 or not.RESET_9999 wrote: ↑Wed Mar 04, 2020 12:04 am-personally I'm now using the newest tsmuxer with no DV descriptor in the HDR10 layer.
this one: https://drive.google.com/open?id=1Gq5TA ... B1io4OwHW9
Yes I did and it works properly. Of course the truehd track need to be processed in eac3toGrencola wrote: ↑Wed Mar 04, 2020 4:33 amhave you tried a dual layer mkv remux at all? curious if demuxing it (gMKVExtractGUI) and making a ts from the two hevc and thd atmos files play properly on the x700 or not.RESET_9999 wrote: ↑Wed Mar 04, 2020 12:04 am-personally I'm now using the newest tsmuxer with no DV descriptor in the HDR10 layer.
this one: https://drive.google.com/open?id=1Gq5TA ... B1io4OwHW9
What is the difference between having descriptors in both the EL and BL layers, compared to only the EL layer? Do they play differently?RESET_9999 wrote: ↑Wed Mar 04, 2020 12:04 am-personally I'm now using the newest tsmuxer with no DV descriptor in the HDR10 layer.
this one: https://drive.google.com/open?id=1Gq5TA ... B1io4OwHW9
Are you saying that a method of using the MKV container exists? Wouldn't we need a single layer DV file?RESET_9999 wrote: ↑Wed Mar 04, 2020 11:39 amYes I did and it works properly. Of course the truehd track need to be processed in eac3toGrencola wrote: ↑Wed Mar 04, 2020 4:33 amhave you tried a dual layer mkv remux at all? curious if demuxing it (gMKVExtractGUI) and making a ts from the two hevc and thd atmos files play properly on the x700 or not.RESET_9999 wrote: ↑Wed Mar 04, 2020 12:04 am-personally I'm now using the newest tsmuxer with no DV descriptor in the HDR10 layer.
this one: https://drive.google.com/open?id=1Gq5TA ... B1io4OwHW9
awesome, I figured as much. and yea eac3to is probably the quickest way to add the ac3 track.RESET_9999 wrote: ↑Wed Mar 04, 2020 11:39 amYes I did and it works properly. Of course the truehd track need to be processed in eac3to
Can you explain what you did here?RESET_9999 wrote: ↑Wed Mar 04, 2020 11:39 amYes I did and it works properly. Of course the truehd track need to be processed in eac3toGrencola wrote: ↑Wed Mar 04, 2020 4:33 amhave you tried a dual layer mkv remux at all? curious if demuxing it (gMKVExtractGUI) and making a ts from the two hevc and thd atmos files play properly on the x700 or not.RESET_9999 wrote: ↑Wed Mar 04, 2020 12:04 am-personally I'm now using the newest tsmuxer with no DV descriptor in the HDR10 layer.
this one: https://drive.google.com/open?id=1Gq5TA ... B1io4OwHW9
depends on what device you're playing it on. x700 can play dual-layer ts made from mkv / m2ts fine. the shield, firetv, apple tv etc all still need single layer.
Unless I misunderstood what he asked. DV in MKV container does not work but if the mkv got both layers, you can build a new DV TS from it.
no difference at all, but i believe the DV descriptor on the HDR10 layer is not needed. Just like the mp4muxer does.
Code: Select all
pip install bitstring
Code: Select all
python src/bl_el_rpu_builder.py -h
or(Windows users)
python-3.7.6.amd64\python.exe src\bl_el_rpu_builder.py -h
Code: Select all
Version 0.0.3
-- Fixed HDR10+ bug
-- Fixed "Malformed NALu EOS" bug
-- Fixed "Folders and files with spaces in the name" bug
-- Fixed "EL_ANALYSIS hanging at 0.0%" bug
-- Changed the values of the switch "-lbf" for a better management of the RAM.
Default value: 500. Incremental steps of 100
-- Improved logic and readability of the code
Version 0.0.2
-- Improved logic and readability of the code
-- The "-tbw" switch (time before the writer) has been removed and replaced by an internal mechanism.
-- The "-mode" switch has been added. Allows you to choose the output mode:
BL + EL + RPU (Single Track Double Layer == default) or BL + RPU (Single Track Single Layer).
For more information, run the program with the "-h" switch
Version 0.0.1
-- initial release
Code: Select all
initial release
-- Management of raw HEVC streams from REMUXed files
-- DEMUX capability (BL_EL_RPU.hevc ---> BL.hevc + EL_RPU.hevc)