Buffalo BRXL-PT6U2VB BN12 revision, MK ready?

Discussion of LibreDrive mode, compatible drives and firmwares
bioteq
Posts: 5
Joined: Mon Feb 17, 2020 1:57 pm

Buffalo BRXL-PT6U2VB BN12 revision, MK ready?

Post by bioteq »

Hi everyone,

After long deliberations and looking at various options I've decided to order the Buffalo BRXL-PT6U2VB - the choices were somewhat limited where I live and the prices exorbitant, so I chose the best I could, and I found a bit of a surprise in the box.

The drive arrived with BN12 revision firmware not the expected BN11.
I was all ready and set to flash it with the MK version from here: viewtopic.php?f=19&t=19422 and now this bummer...

Can someone tell me if this will result in a softbrick or am I good to go?
Do we even know what changes have been introduced?
Drive Information
OS device name: /dev/rdisk7
Current profile: BD-ROM
Manufacturer: BUFFALO
Product: Optical Drive
Revision: BN12
Serial number:
Firmware date: 2119-05-14 14:15
Bus encryption flags: 1F
Highest AACS version: 23

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959
Thank you all for the amazing efforts here, it took me a long time to sift through (some) the knowledge and I'm still not entirely clear on everything. :)
MartyMcNuts
Posts: 2830
Joined: Wed Nov 22, 2017 11:45 pm

Re: Buffalo BRXL-PT6U2VB BN12 revision, MK ready?

Post by MartyMcNuts »

bioteq wrote:
Thu Feb 20, 2020 5:13 pm
Hi everyone,

After long deliberations and looking at various options I've decided to order the Buffalo BRXL-PT6U2VB - the choices were somewhat limited where I live and the prices exorbitant, so I chose the best I could, and I found a bit of a surprise in the box.

The drive arrived with BN12 revision firmware not the expected BN11.
I was all ready and set to flash it with the MK version from here: viewtopic.php?f=19&t=19422 and now this bummer...

Can someone tell me if this will result in a softbrick or am I good to go?
Do we even know what changes have been introduced?
Drive Information
OS device name: /dev/rdisk7
Current profile: BD-ROM
Manufacturer: BUFFALO
Product: Optical Drive
Revision: BN12
Serial number:
Firmware date: 2119-05-14 14:15
Bus encryption flags: 1F
Highest AACS version: 23

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959
Thank you all for the amazing efforts here, it took me a long time to sift through (some) the knowledge and I'm still not entirely clear on everything. :)
So you are going to flash it with BU40N_1.03-MK?

You should still be able to. Just give it a go. It will either flash successfully or you will get an error before starting the flash.
Cheers :D
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG + Others) & DIY Single Drive Flasher (WW): https://uhdenableddrives.com
mike admin
Posts: 4075
Joined: Wed Nov 26, 2008 2:26 am
Contact:

Re: Buffalo BRXL-PT6U2VB BN12 revision, MK ready?

Post by mike admin »

MartyMcNuts wrote:
Fri Feb 21, 2020 2:23 am
So you are going to flash it with BU40N_1.03-MK?
You should still be able to. Just give it a go. It will either flash successfully or you will get an error before starting the flash.
No no no, he will be flashing it with BN12-MK :)
Attachments
HL-DT-ST-BD-RE_BU40N-BN12-0M01001-211905141415.zip
(1.26 MiB) Downloaded 1088 times
bioteq
Posts: 5
Joined: Mon Feb 17, 2020 1:57 pm

Re: Buffalo BRXL-PT6U2VB BN12 revision, MK ready?

Post by bioteq »

Yes yes yes, I will most certainly be flashing it with bn12-MK :)))
As soon as I’m back home on Sunday.

Thank you so much Mike :)
MartyMcNuts
Posts: 2830
Joined: Wed Nov 22, 2017 11:45 pm

Re: Buffalo BRXL-PT6U2VB BN12 revision, MK ready?

Post by MartyMcNuts »

mike admin wrote:
Fri Feb 21, 2020 7:28 pm
MartyMcNuts wrote:
Fri Feb 21, 2020 2:23 am
So you are going to flash it with BU40N_1.03-MK?
You should still be able to. Just give it a go. It will either flash successfully or you will get an error before starting the flash.
No no no, he will be flashing it with BN12-MK :)
Awesome!! Good stuff, Mike.

On another note, any updates on the Pioneer drives??
Cheers :D
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG + Others) & DIY Single Drive Flasher (WW): https://uhdenableddrives.com
bioteq
Posts: 5
Joined: Mon Feb 17, 2020 1:57 pm

Re: Buffalo BRXL-PT6U2VB BN12 revision, MK ready?

Post by bioteq »

A quick update.
BRXL-PT6U2VB BN12 is now a LibreDrive :D

Thank you Mike!

Here is the drive info after the MK firmware update:

Drive Information
OS device name: \Device\CdRom0
Current profile: BD-ROM
Manufacturer: BUFFALO
Product: Optical Drive
Revision: BN12
Serial number:
Firmware date: 2119-05-14 14:15
Bus encryption flags: 1F
Highest AACS version: 23

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 0.BN120
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Possible, not yet enabled
Bluntman
Posts: 156
Joined: Fri Dec 20, 2019 5:30 pm

Re: Buffalo BRXL-PT6U2VB BN12 revision, MK ready?

Post by Bluntman »

mike admin wrote:
MartyMcNuts wrote:
Fri Feb 21, 2020 2:23 am
So you are going to flash it with BU40N_1.03-MK?
You should still be able to. Just give it a go. It will either flash successfully or you will get an error before starting the flash.
No no no, he will be flashing it with BN12-MK :)

Reviving this thread as I recently bought this drive. I used this firmware and it flashed just fine. Makemkv showed patched and all good.

However makemkv would report no disc after scanning the disc for well over a minute.

Multiple computers tested all the same result.

Out of desperation I tried the stock LG BU40N 1.0 DE firmware as I read it’s a rebadged BU40N.

After I flashed it. It worked perfectly. Multiple 4K discs ripped.

Anyone else having this issue or is it just me? If I can help as I have a stock drive still or in any way with logs etc.

Thanks.


Sent from my iPad using Tapatalk Pro
jonghotti
Posts: 993
Joined: Tue May 01, 2018 7:04 pm
Location: San Francisco Bay Area
Contact:

Re: Buffalo BRXL-PT6U2VB BN12 revision, MK ready?

Post by jonghotti »

Yes I've had good luck flashing them with the stock 1.00.
The Original "UHD Friendly" Drive Seller
https://www.makemkv.com/forum/viewtopic ... 20&t=17829
Bluntman
Posts: 156
Joined: Fri Dec 20, 2019 5:30 pm

Re: Buffalo BRXL-PT6U2VB BN12 revision, MK ready?

Post by Bluntman »

jonghotti wrote:Yes I've had good luck flashing them with the stock 1.00.
Thanks appreciate the info jonghotti!


Sent from my iPhone using Tapatalk Pro
hansolo
Posts: 20
Joined: Fri Jun 14, 2019 5:31 am

Re: Buffalo BRXL-PT6U2VB BN12 revision, MK ready?

Post by hansolo »

If bought now and is new stock, what is the FW version in it. Is it still BN12? I'm planning to buy EU version. Precise model is BRXL-PT6U2VB-EU. Is it ready for 4K backupping if I flash it with MK BU40N-BN12 fw (HL-DT-ST-BD-RE_BU40N-BN12-0M01001-211905141415.bin) ? What if it comes with BN13 firmware? Thanks.
LG BH16NS55 (w/ WH16NS60 1.02MK) in external enclosure
LG BU40N (1.03MK) in external enclosure
Verbatim #43888 (Pioneer BDR-UD04 FW1.14)
Billycar11
Posts: 4279
Joined: Sun Aug 24, 2014 5:49 am

Re: Buffalo BRXL-PT6U2VB BN12 revision, MK ready?

Post by Billycar11 »

hansolo wrote:
Wed Sep 23, 2020 7:45 am
If bought now and is new stock, what is the FW version in it. Is it still BN12? I'm planning to buy EU version. Precise model is BRXL-PT6U2VB-EU. Is it ready for 4K backupping if I flash it with MK BU40N-BN12 fw (HL-DT-ST-BD-RE_BU40N-BN12-0M01001-211905141415.bin) ? What if it comes with BN13 firmware? Thanks.
the EU version is not i bu40n i believe
what does your makemkv drive info section look like
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
hansolo
Posts: 20
Joined: Fri Jun 14, 2019 5:31 am

Re: Buffalo BRXL-PT6U2VB BN12 revision, MK ready?

Post by hansolo »

I haven't bought it yet. Would LG BU40N and external USB3 enclosure be better option than this Buffalo drive? I believe they are same unit, Buffalo is just rebadged. I think LG BU40N is also official UHD BD drive so it would work with Powerdvd Ultra.
LG BH16NS55 (w/ WH16NS60 1.02MK) in external enclosure
LG BU40N (1.03MK) in external enclosure
Verbatim #43888 (Pioneer BDR-UD04 FW1.14)
Billycar11
Posts: 4279
Joined: Sun Aug 24, 2014 5:49 am

Re: Buffalo BRXL-PT6U2VB BN12 revision, MK ready?

Post by Billycar11 »

hansolo wrote:
Wed Sep 23, 2020 9:50 am
I haven't bought it yet. Would LG BU40N and external USB3 enclosure be better option than this Buffalo drive? I believe they are same unit, Buffalo is just rebadged. I think LG BU40N is also official UHD BD drive so it would work with Powerdvd Ultra.
he says its not a BU40N and he has one that he couldn't flash
https://www.makemkv.com/forum/viewtopic ... +eu#p94510
i wont even get into the power dvd ultra thing but it wont work even with the right version of that buffalo drive trust me i would know i sell alot of them
but power dvd ultra is a joke and a scam for UHD playback half the time it does not even work with all the correct hardware
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
hansolo
Posts: 20
Joined: Fri Jun 14, 2019 5:31 am

Re: Buffalo BRXL-PT6U2VB BN12 revision, MK ready?

Post by hansolo »

So, it sounds like I should avoid Buffalo drive and go with real LG BU40N slim?

Yeah, I'm aware of absurd requirements concerning official UHD BD playback in PC realm. Not really something I would venture myself. I trust my Oppo 203 and Chinoppo players.
LG BH16NS55 (w/ WH16NS60 1.02MK) in external enclosure
LG BU40N (1.03MK) in external enclosure
Verbatim #43888 (Pioneer BDR-UD04 FW1.14)
Hyacin
Posts: 4
Joined: Wed Oct 14, 2020 8:31 pm

Re: Buffalo BRXL-PT6U2VB BN12 revision, MK ready?

Post by Hyacin »

mike admin wrote:
Fri Feb 21, 2020 7:28 pm
MartyMcNuts wrote:
Fri Feb 21, 2020 2:23 am
So you are going to flash it with BU40N_1.03-MK?
You should still be able to. Just give it a go. It will either flash successfully or you will get an error before starting the flash.
No no no, he will be flashing it with BN12-MK :)
Hi, is this still the latest version? I just picked up a BN12.

Thanks!!
Post Reply