ASUS BW-16D1HT FW questions

Forum for discussions about UHD-capable dives
Post Reply
AsusQuery
Posts: 4
Joined: Wed Dec 25, 2019 2:45 pm

ASUS BW-16D1HT FW questions

Post by AsusQuery » Wed Dec 25, 2019 2:51 pm

Just purchased this drive new. Came with 3.03 FW. Used the procedures/videos on this site to get it to 3.02 FW.

UHD extracts are performing swimmingly!

However, I've seen mention of 3.10 and 3.10-MK FW (and I have a copy of the latter via mk-firmware-pack-20191206). Are there any compelling reasons to upgrade or not upgrade? Pros/Cons of 3.02 versus 3.10 or 3.10MK? Is there a well-documented procedure for the upgrade?

(Note: I did do some searching before asking the question, but there are too many results to comb through in a reasonable timeframe.)

Coopervid
Posts: 1922
Joined: Tue Feb 19, 2019 10:32 pm

Re: ASUS BW-16D1HT FW questions

Post by Coopervid » Wed Dec 25, 2019 6:36 pm

The 3.10 (MK) firmware rips faster than 3.02 and 3.03. However, if you have critical discs with read problems then the older ones perform better. I have one drive on 3.03 and another one on 3.10 for both reasons mentioned.

AsusQuery
Posts: 4
Joined: Wed Dec 25, 2019 2:45 pm

Re: ASUS BW-16D1HT FW questions

Post by AsusQuery » Wed Dec 25, 2019 8:10 pm

Thank you. I'm curious how much faster? 3.02 seems to get me upwards of 25-30M/s as it gets to the outer parts of the disk.

Coopervid
Posts: 1922
Joined: Tue Feb 19, 2019 10:32 pm

Re: ASUS BW-16D1HT FW questions

Post by Coopervid » Thu Dec 26, 2019 10:34 am

You can easily flash the versions back and forth and test yourself. Just a matter of seconds and a reboot after it.

AsusQuery
Posts: 4
Joined: Wed Dec 25, 2019 2:45 pm

Re: ASUS BW-16D1HT FW questions

Post by AsusQuery » Thu Dec 26, 2019 1:28 pm

Gotcha. Which patcher should be used, though?

BH14NS40_N1.00-A4_patched.exe

or

ASUS_ODD_FW_Changer_(Modified).exe


In the youtube video, the first one was used to install a DE patch, then the second one to get to 3.02.

It's unclear which should be used to get to 3.10-MK.

Coopervid
Posts: 1922
Joined: Tue Feb 19, 2019 10:32 pm

Re: ASUS BW-16D1HT FW questions

Post by Coopervid » Thu Dec 26, 2019 3:20 pm

Both should work with your drive. Sometimes the ASUS is needed for newer firmwares that don't allow downgrades. But since you are already on a MK firmware both should work.

AsusQuery
Posts: 4
Joined: Wed Dec 25, 2019 2:45 pm

Re: ASUS BW-16D1HT FW questions

Post by AsusQuery » Fri Dec 27, 2019 10:02 pm

Well...3-10MK seems a bit slower than the 3.02. Maybe it doesn't suffer from the sleep bug, though.

Coopervid
Posts: 1922
Joined: Tue Feb 19, 2019 10:32 pm

Re: ASUS BW-16D1HT FW questions

Post by Coopervid » Fri Dec 27, 2019 10:38 pm

That's not my experience. Maybe with discs that read perfectly. My experience with critical discs is that the older firmwares stay longer at lower read speeds if there are any read errors compared to 3.10 and are therefore more successful to provide good copies while 3.10 tries to speed up again and then fails at some point when the retry limit is reached.

Billycar11
Posts: 4349
Joined: Sun Aug 24, 2014 5:49 am

Re: ASUS BW-16D1HT FW questions

Post by Billycar11 » Fri Dec 27, 2019 10:43 pm

AsusQuery wrote:
Fri Dec 27, 2019 10:02 pm
Well...3-10MK seems a bit slower than the 3.02. Maybe it doesn't suffer from the sleep bug, though.
all asus firmware has the sleepbug you're chasing something that does not exist.
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com

Post Reply