Heads up - Support for LG UHD drives

Forum for discussions about UHD-capable dives
jonghotti
Posts: 993
Joined: Tue May 01, 2018 7:04 pm
Location: San Francisco Bay Area
Contact:

Re: Heads up - Support for LG UHD drives

Post by jonghotti »

MartyMcNuts wrote:
Fri Feb 01, 2019 11:03 pm
jonghotti wrote:
Fri Feb 01, 2019 2:40 pm
Had a stack of 8 slims to go through today, 1 BU50N firmware BW50, 5 BU40Ns firmware 1.02, 1 BU40N firmware 1.01, 1 BU40N firmware 1.00. So both 1.00 and 1.01 are friendly and released in 2016 and 2017 respectively with 1.02 the cock-blocker appearing in 2018.

We got any electrical engineers around here? I need some help figuring out where and which pins to solder a SATA data connector onto on an LG BP60NB10 which is USB out only in order to dump it's firmware. Happy to send you one if schematics are not to be found online.
Do you have an esata adapter on your computer? You could possibly get a usb to esata cable so that your usb drive would connect to the esata port, then the esata port is connected to your sata motherboard connection.

Something like
https://www.startech.com/au/HDD/Adapter ... B3S2ESATA3

and
https://www.amazon.ca/StarTech-com-ESAT ... B000NPKGH4
Good call Mr. Nuts I do have esata ports on a couple of these machines I like these older HP SFF desktops. Supposed to be connected to SATA 0 however so why not just a regular SATA > mini usb? I still have a feeling I'm going to end up soldering something but we'll get it done!!
The Original "UHD Friendly" Drive Seller
https://www.makemkv.com/forum/viewtopic ... 20&t=17829
MartyMcNuts
Posts: 2825
Joined: Wed Nov 22, 2017 11:45 pm

Re: Heads up - Support for LG UHD drives

Post by MartyMcNuts »

jonghotti wrote:
Sat Feb 02, 2019 6:31 am
MartyMcNuts wrote:
Fri Feb 01, 2019 11:03 pm
jonghotti wrote:
Fri Feb 01, 2019 2:40 pm
Had a stack of 8 slims to go through today, 1 BU50N firmware BW50, 5 BU40Ns firmware 1.02, 1 BU40N firmware 1.01, 1 BU40N firmware 1.00. So both 1.00 and 1.01 are friendly and released in 2016 and 2017 respectively with 1.02 the cock-blocker appearing in 2018.

We got any electrical engineers around here? I need some help figuring out where and which pins to solder a SATA data connector onto on an LG BP60NB10 which is USB out only in order to dump it's firmware. Happy to send you one if schematics are not to be found online.
Do you have an esata adapter on your computer? You could possibly get a usb to esata cable so that your usb drive would connect to the esata port, then the esata port is connected to your sata motherboard connection.

Something like
https://www.startech.com/au/HDD/Adapter ... B3S2ESATA3

and
https://www.amazon.ca/StarTech-com-ESAT ... B000NPKGH4
Good call Mr. Nuts I do have esata ports on a couple of these machines I like these older HP SFF desktops. Supposed to be connected to SATA 0 however so why not just a regular SATA > mini usb? I still have a feeling I'm going to end up soldering something but we'll get it done!!
Yeah, well I thought it might be worth a try. Really what's the worst that can happen? It doesn't work...
Cheers :D
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG + Others) & DIY Single Drive Flasher (WW): https://uhdenableddrives.com
mike admin
Posts: 4075
Joined: Wed Nov 26, 2008 2:26 am
Contact:

Re: Heads up - Support for LG UHD drives

Post by mike admin »

Let me repeat - all drives with newer firmwares (including slim USB-only) WILL be supported soon.
SamuriHL
Posts: 2322
Joined: Mon Jun 14, 2010 5:32 pm

Re: Heads up - Support for LG UHD drives

Post by SamuriHL »

Awesome! Truly amazing that you're able to support all drives.

Sent from my Pixel XL using Tapatalk

tuuatwaffle
Posts: 7
Joined: Thu Jan 31, 2019 7:13 pm

Re: Heads up - Support for LG UHD drives

Post by tuuatwaffle »

mike admin wrote:
Sat Feb 02, 2019 11:44 am
Let me repeat - all drives with newer firmwares (including slim USB-only) WILL be supported soon.
Is that including Pioneer? Thanks for the fantastic work you do.
spl147
Posts: 309
Joined: Mon Dec 10, 2012 4:59 pm

Heads up - Support for LG UHD drives

Post by spl147 »

tuuatwaffle wrote:
mike admin wrote:
Sat Feb 02, 2019 11:44 am
Let me repeat - all drives with newer firmwares (including slim USB-only) WILL be supported soon.
Is that including Pioneer? Thanks for the fantastic work you do.
Pioneer might be supported, how many times must it be said


Sent from my iPhone Xs Max using Tapatalk Pro
Last edited by spl147 on Sat Feb 02, 2019 4:57 pm, edited 1 time in total.
tuuatwaffle
Posts: 7
Joined: Thu Jan 31, 2019 7:13 pm

Re: Heads up - Support for LG UHD drives

Post by tuuatwaffle »

spl147 wrote:
Sat Feb 02, 2019 4:57 pm
tuuatwaffle wrote:
mike admin wrote:
Sat Feb 02, 2019 11:44 am
Let me repeat - all drives with newer firmwares (including slim USB-only) WILL be supported soon.
Is that including Pioneer? Thanks for the fantastic work you do.
Pioneer will never be supported, how many times must it be said


Sent from my iPhone Xs Max using Tapatalk Pro
Probably a few more if Mike says All drives will be supported.
mike admin
Posts: 4075
Joined: Wed Nov 26, 2008 2:26 am
Contact:

Re: Heads up - Support for LG UHD drives

Post by mike admin »

spl147 wrote:
Sat Feb 02, 2019 4:57 pm
Pioneer will never be supported, how many times must it be said
I have to take it back. Pioneer might be supported after all. I cannot provide any hints or estimates, but it is sufficient to say that "never" part should be certainly stroked out.
spl147
Posts: 309
Joined: Mon Dec 10, 2012 4:59 pm

Re: Heads up - Support for LG UHD drives

Post by spl147 »

mike admin wrote:
spl147 wrote:
Sat Feb 02, 2019 4:57 pm
Pioneer will never be supported, how many times must it be said
I have to take it back. Pioneer might be supported after all. I cannot provide any hints or estimates, but it is sufficient to say that "never" part should be certainly stroked out.
I stand corrected


Sent from my iPhone Xs Max using Tapatalk Pro
Xavier24
Posts: 3
Joined: Sun Dec 30, 2018 8:27 pm

Re: Heads up - Support for LG UHD drives

Post by Xavier24 »

Thanks again Mike for this good news.
I will be able to enjoy with my LG BU40N usb player full of MakeMkv.
I am impatient ... :D
tuuatwaffle
Posts: 7
Joined: Thu Jan 31, 2019 7:13 pm

Re: Heads up - Support for LG UHD drives

Post by tuuatwaffle »

mike admin wrote:
Sat Feb 02, 2019 5:18 pm
spl147 wrote:
Sat Feb 02, 2019 4:57 pm
Pioneer will never be supported, how many times must it be said
I have to take it back. Pioneer might be supported after all. I cannot provide any hints or estimates, but it is sufficient to say that "never" part should be certainly stroked out.
Hopefully. Cracking work sir.
unknownLake
Posts: 1
Joined: Wed Jan 23, 2019 5:57 pm

Re: Heads up - Support for LG UHD drives

Post by unknownLake »

I apologize for my ignorance but will computers with CPUs earlier than Kabylake be able to rip UHD discs with MakeMKV?
- Thanks

The LG site says the WH16NS60 system requirements are Intel 7th Gen. Kabylake Core i3 or higher.

https://www.lg.com/us/burners-drives/lg-WH16NS60
jonghotti
Posts: 993
Joined: Tue May 01, 2018 7:04 pm
Location: San Francisco Bay Area
Contact:

Re: Heads up - Support for LG UHD drives

Post by jonghotti »

ziggy101 wrote:
Sat Feb 02, 2019 4:18 am
jonghotti wrote:
Fri Feb 01, 2019 2:40 pm
We got any electrical engineers around here? I need some help figuring out where and which pins to solder a SATA data connector onto on an LG BP60NB10 which is USB out only in order to dump it's firmware. Happy to send you one if schematics are not to be found online.
The few USB drives I've taken apart had an internal SATA interface, but a small pc board was connected to it to translate to a USB connection. So it looks like you can easily unplug that board and gain access to a regular SATA connector once you get the thing out of the case (I haven't actually tried it, but it sure looks like it would work).
You are correct, most of them do function like that. Except for this one, it's one single piece. Certainly more cost effective to wire the connector directly to the ICs that are running the device. I was going to try that SATA > USB cable idea something tells me it's not going to be that easy because if it were someone would have already done it :)
The Original "UHD Friendly" Drive Seller
https://www.makemkv.com/forum/viewtopic ... 20&t=17829
jonghotti
Posts: 993
Joined: Tue May 01, 2018 7:04 pm
Location: San Francisco Bay Area
Contact:

Re: Heads up - Support for LG UHD drives

Post by jonghotti »

Xavier24 wrote:
Sat Feb 02, 2019 5:47 pm
Thanks again Mike for this good news.
I will be able to enjoy with my LG BU40N usb player full of MakeMkv.
I am impatient ... :D
Why can't you enjoy it now?
The Original "UHD Friendly" Drive Seller
https://www.makemkv.com/forum/viewtopic ... 20&t=17829
jonghotti
Posts: 993
Joined: Tue May 01, 2018 7:04 pm
Location: San Francisco Bay Area
Contact:

Re: Heads up - Support for LG UHD drives

Post by jonghotti »

unknownLake wrote:
Sat Feb 02, 2019 7:14 pm
I apologize for my ignorance but will computers with CPUs earlier than Kabylake be able to rip UHD discs with MakeMKV?
- Thanks

The LG site says the WH16NS60 system requirements are Intel 7th Gen. Kabylake Core i3 or higher.

https://www.lg.com/us/burners-drives/lg-WH16NS60
Yes please ignore those specs those are for using the drive as a playback device in a computer which is something I've still never seen anyone do. Pretty much any drive in any computer can be used with makemkv. Requirements are basically that your computer has a pulse and a large hard drive :)
The Original "UHD Friendly" Drive Seller
https://www.makemkv.com/forum/viewtopic ... 20&t=17829
Post Reply