What am i possibly doing wrong

The place to discuss linux version of MakeMKV
paintbullits
Posts: 3
Joined: Fri Nov 13, 2026 10:09 pm

What am i possibly doing wrong

Post by paintbullits »

So, i must be an idot somehow but would anyone please explain how?

On linux mint, I tried installing 2.0.0 with

Code: Select all

make
sudo make install
in both the oss and bin folders. everything seemed to go ok. Then when I open it, im hit with "Scanning CD-ROM devices" and it will never find any.

After reading around here some I found a lot of people were saying there were bugs and to use older versions. So I uninstalled and tried again with progressively older versions. This is where i don’t know what’s going on. i will run the same make sudo make install commands, read the eula, type "yes", and MakeMKV will NOT be installed. Its not in the menue, "makemkv' in the terminal is not a command and nothing exists at "/usr/bin/makemkv".

Any ideas folks?
Woodstock
Posts: 11026
Joined: Sun Jul 24, 2011 11:21 pm

Re: What am i possibly doing wrong

Post by Woodstock »

First step wrong: installing version 2.0.0, which has a vivid history of being broken.

Version 1.18.x and 1.17.x both have better history of working.

https://www.makemkv.com/download/old/
16442496
Posts: 113
Joined: Sat Jun 11, 2016 12:47 pm

Re: What am i possibly doing wrong

Post by 16442496 »

For makemkv-oss

Did you first run?

./configure
MakeMKV 1.17.6
+ gddrescue
paintbullits
Posts: 3
Joined: Fri Nov 13, 2026 10:09 pm

Re: What am i possibly doing wrong

Post by paintbullits »

16442496 wrote: Sat Nov 14, 2026 3:26 am For makemkv-oss

Did you first run?

./configure
Yes, i did. should have mentioned that.
Woodstock wrote: Fri Nov 13, 2026 10:40 pm Version 1.18.x and 1.17.x both have better history of working.
i did go over that actually. to be precise i have tried
1.18.4
1.18.2
1.17.7
1.17.6
and
1.17.4
all exhibiting the same behaviour of getting through the terminal installation without me being able to spot any error message, yet not actually getting installed

At any rate, i tried version 2 again because it was the one that got the farthest. After much frustration i found that i can get further than the "Scanning CD-ROM devices" only if i start the program with the DVD tray extended out. closed empty or closed with dvd both get stuck for some reason. idk why though

Thank you both!
16442496
Posts: 113
Joined: Sat Jun 11, 2016 12:47 pm

Re: What am i possibly doing wrong

Post by 16442496 »

Maybe your drive is not a DVD drive... maybe it is BD drive?...

MakeMKV have this "firmware/SDF_Stop... forever bug" with some Blu-Ray drives.
Last fully working version for Linux is 1.17.6. (maybe 1.17.7)

Can you tell your drive's brand and model.

You could try if this helps:

viewtopic.php?p=203364#p203364
MakeMKV 1.17.6
+ gddrescue
tomty89
Posts: 249
Joined: Sun Dec 13, 2020 8:48 am

Re: What am i possibly doing wrong

Post by tomty89 »

16442496 wrote: Sun Nov 15, 2026 6:23 am Maybe your drive is not a DVD drive... maybe it is BD drive?...

MakeMKV have this "firmware/SDF_Stop... forever bug" with some Blu-Ray drives.
Last fully working version for Linux is 1.17.6. (maybe 1.17.7)

Can you tell your drive's brand and model.

You could try if this helps:

viewtopic.php?p=203364#p203364
IIRC the bug affects some DVD drives as well.
16442496
Posts: 113
Joined: Sat Jun 11, 2016 12:47 pm

Re: What am i possibly doing wrong

Post by 16442496 »

tomty89 wrote: Sun Nov 15, 2026 6:39 pm
16442496 wrote: Sun Nov 15, 2026 6:23 am Maybe your drive is not a DVD drive... maybe it is BD drive?...

MakeMKV have this "firmware/SDF_Stop... forever bug" with some Blu-Ray drives.
Last fully working version for Linux is 1.17.6. (maybe 1.17.7)

Can you tell your drive's brand and model.

You could try if this helps:

viewtopic.php?p=203364#p203364
IIRC the bug affects some DVD drives as well.
Could be, but i haven't seen or heard any.
MakeMKV 1.17.6
+ gddrescue
paintbullits
Posts: 3
Joined: Fri Nov 13, 2026 10:09 pm

Re: What am i possibly doing wrong

Post by paintbullits »

i can say for certain that its not a blue ray drive
Drive Information
OS device name: /dev/sr1
Manufacturer: hp
Product: DVDROM DH20N
Revision: EB00
Serial number: K6D9C3B3440

No disc inserted
interestingly, my second drive was apparently the culprit. i also had
Drive Information
OS device name: /dev/sr0
Manufacturer: HL-DT-ST
Product: DVD-RAM GH15L
Revision: FA01
Serial number: K6A864K2345
Firmware date: 2008-02-05 12:34:56

LibreDrive Information
Status: Possible, might be supported in future, but not likely soon
Drive platform: RS1013
Firmware version: FA01-00a020508

No disc inserted
but on a whim i unplugged it, and now version 2.0 works flawlessly as expected ¯\_ (ツ)_/¯
16442496
Posts: 113
Joined: Sat Jun 11, 2016 12:47 pm

Re: What am i possibly doing wrong

Post by 16442496 »

paintbullits wrote: Tue Nov 17, 2026 12:37 am i can say for certain that its not a blue ray drive
Drive Information
OS device name: /dev/sr1
Manufacturer: hp
Product: DVDROM DH20N
Revision: EB00
Serial number: K6D9C3B3440

No disc inserted
interestingly, my second drive was apparently the culprit. i also had
Drive Information
OS device name: /dev/sr0
Manufacturer: HL-DT-ST
Product: DVD-RAM GH15L
Revision: FA01
Serial number: K6A864K2345
Firmware date: 2008-02-05 12:34:56

LibreDrive Information
Status: Possible, might be supported in future, but not likely soon
Drive platform: RS1013
Firmware version: FA01-00a020508

No disc inserted
but on a whim i unplugged it, and now version 2.0 works flawlessly as expected ¯\_ (ツ)_/¯
Ok, those are DVD drives.
And it wasn't that Blu-Ray drive firmware/SDF_Stop Forever Bug after all. :)
MakeMKV 1.17.6
+ gddrescue
tomty89
Posts: 249
Joined: Sun Dec 13, 2020 8:48 am

Re: What am i possibly doing wrong

Post by tomty89 »

16442496 wrote: Tue Nov 17, 2026 5:44 am And it wasn't that Blu-Ray drive firmware/SDF_Stop Forever Bug after all. :)
Actually the fact that MakeMKV shows "LibreDrive Information" for this "second drive" (but not the other one) suggests that it was most likely the "SDF_Stop Forever Bug". AFAIK the bug occurs whenever a drive is "possibly" LibreDrive (but not "exactly" / "currently" / "enabled"). (It does not occur whenever MakeMKV has no way to check whether a drive "can be" a LibreDrive -- in which case no "LibreDrive Information" section appears.)

I never have multiple drives connected to a system simultaneously though so I have no idea whether a "problematic" drive can prevent MakeMKV from working "at all".
16442496
Posts: 113
Joined: Sat Jun 11, 2016 12:47 pm

Re: What am i possibly doing wrong

Post by 16442496 »

"I never have multiple drives connected to a system simultaneously though so I have no idea whether a "problematic" drive can prevent MakeMKV from working "at all"."

I have two drive system and just tested with v.2.0.0.
MakeMKV opens and works normally, even when there is one drive that needs "older mmkv version/firmware/SDF_stop". and you do nothing of those.

Both my Pioneer BD-ROM drives are one of these:
"LibreDrive Information
Status: Possible, but very unlikely to happen
Drive platform: Pioneer RS1003
Firmware version: ID58"

Mabe it need to set: Ask for single drive mode and select drive that works.
MakeMKV 1.17.6
+ gddrescue