George24 wrote: Sun Oct 18, 2026 11:22 pm
Hello. Very new to this site. I do not appear to be able to PM anyone (or I am unable to figure out how to do so). I am operating on Windows and here are the specs of my Pioneer drive below:
Drive Information
OS device name: E:
Current profile: BD-ROM
Manufacturer: PIONEER
Product: BD-RW BDR-XD05
Revision: 3.10
Serial number: QLDL070871UC
Firmware date: 2017-06-22
Bus encryption flags: 1B
Highest AACS version: 72
LibreDrive Information
Status: Enabled
Drive platform: RS8232
Firmware name: PIONEER BDR-XD05
Firmware type: Original (unpatched)
Firmware version: 3.10/ID34
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes
Thank you
Check your PMs.
Thank you for getting back with me. However, when I tried flashing the drive, I get an error in command prompt:
"ERROR: Expected exactly one firmware file (*1.*) in this folder, found 2.
Press Enter to close this window: "
Not sure what went wrong. If assistance could be provided that would be appreciated. Thank you.
George24 wrote: Sun Oct 18, 2026 11:22 pm
Hello. Very new to this site. I do not appear to be able to PM anyone (or I am unable to figure out how to do so). I am operating on Windows and here are the specs of my Pioneer drive below:
Drive Information
OS device name: E:
Current profile: BD-ROM
Manufacturer: PIONEER
Product: BD-RW BDR-XD05
Revision: 3.10
Serial number: QLDL070871UC
Firmware date: 2017-06-22
Bus encryption flags: 1B
Highest AACS version: 72
LibreDrive Information
Status: Enabled
Drive platform: RS8232
Firmware name: PIONEER BDR-XD05
Firmware type: Original (unpatched)
Firmware version: 3.10/ID34
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes
Thank you
Check your PMs.
Thank you for getting back with me. However, when I tried flashing the drive, I get an error in command prompt:
"ERROR: Expected exactly one firmware file (*1.*) in this folder, found 2.
Press Enter to close this window: "
Not sure what went wrong. If assistance could be provided that would be appreciated. Thank you.
Please check your PMs. That was just a Windows-exclusive bug in the flash.ps1 script due to PowerShell’s quirky syntax, so it’s not related to BDRFlash++ itself and is already all sorted out now.
Do you want to crossflash your Pioneer drive with UHD-compatible firmware? Check out BDRFlash++ here.
Looking for a 4K UHD Pioneer drive from the BDRFlash++ developer? Check out this thread.
Thank you for getting back with me. However, when I tried flashing the drive, I get an error in command prompt:
"ERROR: Expected exactly one firmware file (*1.*) in this folder, found 2.
Press Enter to close this window: "
Not sure what went wrong. If assistance could be provided that would be appreciated. Thank you.
Please check your PMs. That was just a Windows-exclusive bug in the flash.ps1 script due to PowerShell’s quirky syntax, so it’s not related to BDRFlash++ itself and is already all sorted out now.
I do apologize for bothering you again but the link provided is not working.
Thank you for getting back with me. However, when I tried flashing the drive, I get an error in command prompt:
"ERROR: Expected exactly one firmware file (*1.*) in this folder, found 2.
Press Enter to close this window: "
Not sure what went wrong. If assistance could be provided that would be appreciated. Thank you.
Please check your PMs. That was just a Windows-exclusive bug in the flash.ps1 script due to PowerShell’s quirky syntax, so it’s not related to BDRFlash++ itself and is already all sorted out now.
I do apologize for bothering you again but the link provided is not working.
Check your PMs (again).
Do you want to crossflash your Pioneer drive with UHD-compatible firmware? Check out BDRFlash++ here.
Looking for a 4K UHD Pioneer drive from the BDRFlash++ developer? Check out this thread.
I have following drive and was interested in using BDRFlash++ but I am unable to send PM due to recently created account. I tried emailing but unsure if here is better to request PM. Can you PM me if I don't have PM privilege?
My drive info is below
Drive Information
OS device name: D:
Manufacturer: PIONEER
Product: BD-RW BDR-UD03
Revision: 1.03
Serial number: PKDL296205WL
Firmware date: 2015-05-14
Bus encryption flags: 1B
Highest AACS version: 82
LibreDrive Information
Status: Enabled
Drive platform: RS8510
Firmware name: PIONEER BDR-US03
Firmware type: Original (unpatched)
Firmware version: 1.03/ID19
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes
Runaround5500, i did mine on Linux too (Mint, x86-64) on a BDR-212 with the newer firmware... took about five minutes. only snag was it wouldnt see the drive until i ran it with sudo, and i had to unplug and replug after before it showed the new firmware. makemkv has read my UHDs fine since
I have following drive and was interested in using BDRFlash++ but I am unable to send PM due to recently created account. I tried emailing but unsure if here is better to request PM. Can you PM me if I don't have PM privilege?
My drive info is below
Drive Information
OS device name: D:
Manufacturer: PIONEER
Product: BD-RW BDR-UD03
Revision: 1.03
Serial number: PKDL296205WL
Firmware date: 2015-05-14
Bus encryption flags: 1B
Highest AACS version: 82
LibreDrive Information
Status: Enabled
Drive platform: RS8510
Firmware name: PIONEER BDR-US03
Firmware type: Original (unpatched)
Firmware version: 1.03/ID19
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes
