Forum for discussions about UHD-capable dives
-
thewallace
- Posts: 13
- Joined: Sat Mar 23, 2019 2:09 am
#1
Post
by thewallace » Tue Mar 18, 2025 11:37 pm
I picked up an interesting BD/DVD-RW drive out of a Epson disc publisher, a Pioneer BDE-PR1EP. The specs say: "These drives perform above the industry standard, offering extremely accurate publishing with an exceptionally low error rate." Its also said to have 'specific' firmware. The case is dated 2020 but there is nothing about MT1959 anywhere. The info below is on a BD, a 4K just makes seeking noise in the tray. I have two drives, I may just try to flash one and risk it to see what happens.

Last edited by thewallace on Thu Mar 20, 2025 1:26 pm, edited 2 times in total.
-
Coopervid
- Posts: 4853
- Joined: Tue Feb 19, 2019 10:32 pm
#2
Post
by Coopervid » Wed Mar 19, 2025 10:58 am
This drive can't be flashed.
-
thewallace
- Posts: 13
- Joined: Sat Mar 23, 2019 2:09 am
#3
Post
by thewallace » Wed Mar 19, 2025 1:40 pm
Yeah, the SDF Tool said it had the wrong platform. I'll keep it as a pure BD player/writer. BTW, I just extracted the BD of Inter****r. At 39gb it took 29 minutes, this thing flies!
-
thewallace
- Posts: 13
- Joined: Sat Mar 23, 2019 2:09 am
#4
Post
by thewallace » Thu Mar 20, 2025 1:16 pm
I did some digging and under the surface this looks like a BDE-PR1ME-L. A "Cost-effective business Blu-ray recorder, suitable for loading into automated equipment. CD Printer/Recorder, CD library." Sounds like a durable workhorse. The specs rate BD Read Single and Dual both at 12x. Too bad it can't be flashed.
-
zittrig
- Posts: 436
- Joined: Sat Jan 09, 2021 5:45 pm
#5
Post
by zittrig » Thu Mar 20, 2025 4:47 pm
I've in my mind that these drives are unlabled BDR-S-Line. The sealed screws could be also a hint. But I can't find where I've read this. I'm probably wrong.
-
Nikilite
- Posts: 1
- Joined: Fri Apr 03, 2026 11:57 am
#6
Post
by Nikilite » Fri Apr 03, 2026 12:08 pm
there must be a way to flash it. i guess?
well they seem to have a specific firmware and probably it's better to leave the original there.
-
HSH1979
- Posts: 21
- Joined: Wed Jul 08, 2026 9:09 am
#7
Post
by HSH1979 » Mon Oct 19, 2026 9:14 am
were you able to make it work?
-
mattjackson86
- Posts: 14
- Joined: Tue Jul 07, 2026 10:21 pm
#8
Post
by mattjackson86 » Sat Oct 31, 2026 9:21 pm
-
gwhitcombe71
- Posts: 48
- Joined: Fri Oct 23, 2026 2:41 am
#9
Post
by gwhitcombe71 » Sun Nov 01, 2026 6:56 pm
mattjackson86 wrote:It can be flashed to a 211M
mattjackson86 how did you get round the wrong platform error in SDF Tool then? thewallace said it wouldnt take it, so im wondering if you used a different tool or just a different firmware file... (and did the drive still read 4K discs afterwards, or is it still just seeking in the tray?)
-
mattjackson86
- Posts: 14
- Joined: Tue Jul 07, 2026 10:21 pm
#10
Post
by mattjackson86 » Sun Nov 01, 2026 8:56 pm
My flasher flashes the advertised crossflashes just fine. I can't say how other flashers work but I finding much more is flashable than anyone else right now and its being heavily tested by others in other forums. Just wanted to pass it along here as question came up
Generally older flashed were "dumb" with just hard coded A > B flashes approved. I take a different approach so list is huge. Something like 20k+ cross flash combos right now over versions and models.