LG BU40N SDFtool Flasher v1.3.6. "Command produced error code 0xff056103"

[dialogueravenous]

I'm trying to flash an LG BU40N using SDFtool Flasher v1.3.6 on Windows 10 using firmware file HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin but when I click "start" I get the error "Command produced error code 0xff056103"
Is there something I'm doing wrong here? I have makemkv latest version installed on windows 10.
Drive details from makemkv v1.18.2 on macos:
Drive Information

OS device name: /dev/rdisk6

Current profile: CD-ROM

Manufacturer: HL-DT-ST

Product: BD-RE BU40N

Revision: FR07

Firmware date: 2116-12-20 16:51

Bus encryption flags: 1F

Highest AACS version: 76



LibreDrive Information

Status: Enabled

Drive platform: MT1959

Firmware type: Original (unpatched)

Firmware version: 0.FR07J

DVD all regions: Yes
BD raw data read: Yes

BD raw metadata read: Yes

Unrestricted read speed: Yes


Disc Information

Label: DX-ESATL

Timestamp: 2009-04-28 15:23:14

Data capacity: 0.4 Gb

[MartyMcNuts]

I'm trying to flash an LG BU40N using SDFtool Flasher v1.3.6 on Windows 10 using firmware file HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin but when I click "start" I get the error "Command produced error code 0xff056103"
Is there something I'm doing wrong here? I have makemkv latest version installed on windows 10.
Drive details from makemkv v1.18.2 on macos:
Drive Information

OS device name: /dev/rdisk6

Current profile: CD-ROM

Manufacturer: HL-DT-ST

Product: BD-RE BU40N

Revision: FR07

Serial number:

Firmware date: 2116-12-20 16:51

Bus encryption flags: 1F

Highest AACS version: 76



LibreDrive Information

Status: Enabled

Drive platform: MT1959

Firmware type: Original (unpatched)

Firmware version: 0.FR07J

DVD all regions: Yes
BD raw data read: Yes

BD raw metadata read: Yes

Unrestricted read speed: Yes


Disc Information

Label: DX-ESATL

Timestamp: 2009-04-28 15:23:14

Data capacity: 0.4 Gb

Take the disc out of the drive.

I also recommend flashing directly to DE_LG_BU40N_1.00 for your drive as your firmware is not encrypted.

[dialogueravenous]

I'm trying to flash an LG BU40N using SDFtool Flasher v1.3.6 on Windows 10 using firmware file HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin but when I click "start" I get the error "Command produced error code 0xff056103"
Is there something I'm doing wrong here? I have makemkv latest version installed on windows 10.
Drive details from makemkv v1.18.2 on macos:
Drive Information

OS device name: /dev/rdisk6

Current profile: CD-ROM

Manufacturer: HL-DT-ST

Product: BD-RE BU40N

Revision: FR07

Serial number:

Firmware date: 2116-12-20 16:51

Bus encryption flags: 1F

Highest AACS version: 76



LibreDrive Information

Status: Enabled

Drive platform: MT1959

Firmware type: Original (unpatched)

Firmware version: 0.FR07J

DVD all regions: Yes
BD raw data read: Yes

BD raw metadata read: Yes

Unrestricted read speed: Yes


Disc Information

Label: DX-ESATL

Timestamp: 2009-04-28 15:23:14

Data capacity: 0.4 Gb

Take the disc out of the drive.

I also recommend flashing directly to DE_LG_BU40N_1.00 for your drive as your firmware is not encrypted.

Oh $h!t, thank you! I flashed it to HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin, if I want to flash to DE_LG_BU40N_1.00 can I do that without going back to the original firmware? DE_LG_BU40N_1.00 wasn't in "The all you need firmware pack". Do you know where I get that from a reputable source?

[MartyMcNuts]

I'm trying to flash an LG BU40N using SDFtool Flasher v1.3.6 on Windows 10 using firmware file HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin but when I click "start" I get the error "Command produced error code 0xff056103"
Is there something I'm doing wrong here? I have makemkv latest version installed on windows 10.
Drive details from makemkv v1.18.2 on macos:
Drive Information

OS device name: /dev/rdisk6

Current profile: CD-ROM

Manufacturer: HL-DT-ST

Product: BD-RE BU40N

Revision: FR07

Serial number:

Firmware date: 2116-12-20 16:51

Bus encryption flags: 1F

Highest AACS version: 76



LibreDrive Information

Status: Enabled

Drive platform: MT1959

Firmware type: Original (unpatched)

Firmware version: 0.FR07J

DVD all regions: Yes
BD raw data read: Yes

BD raw metadata read: Yes

Unrestricted read speed: Yes


Disc Information

Label: DX-ESATL

Timestamp: 2009-04-28 15:23:14

Data capacity: 0.4 Gb

Take the disc out of the drive.

I also recommend flashing directly to DE_LG_BU40N_1.00 for your drive as your firmware is not encrypted.

Oh $h!t, thank you! I flashed it to HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin, if I want to flash to DE_LG_BU40N_1.00 can I do that without going back to the original firmware? DE_LG_BU40N_1.00 wasn't in "The all you need firmware pack". Do you know where I get that from a reputable source?

It is in my all you need firmware pack in the same location/post that you downloaded SDFtool flasher from.

[dialogueravenous]

Take the disc out of the drive.

I also recommend flashing directly to DE_LG_BU40N_1.00 for your drive as your firmware is not encrypted.

Oh $h!t, thank you! I flashed it to HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin, if I want to flash to DE_LG_BU40N_1.00 can I do that without going back to the original firmware? DE_LG_BU40N_1.00 wasn't in "The all you need firmware pack". Do you know where I get that from a reputable source?

It is in my all you need firmware pack in the same location/post that you downloaded SDFtool flasher from.

Ah, I see, I was using the all you need firmware pack BillyCar11 posted in this guide which seems to be a different pack: viewtopic.php?f=16&t=19634

[MartyMcNuts]

Oh $h!t, thank you! I flashed it to HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin, if I want to flash to DE_LG_BU40N_1.00 can I do that without going back to the original firmware? DE_LG_BU40N_1.00 wasn't in "The all you need firmware pack". Do you know where I get that from a reputable source?

It is in my all you need firmware pack in the same location/post that you downloaded SDFtool flasher from.

Ah, I see, I was using the all you need firmware pack BillyCar11 posted in this guide which seems to be a different pack: viewtopic.php?f=16&t=19634

I haven't looked but would be suprised if his firmware pack doesn't include it.