Pioneer BDR-S13UBK Stopped Working

[creator]

Hey everyone. Last night my Pioneer drive stopped ripping blu-rays. Directly before it stopped working, I upgraded to Windows 11 and to MakeMKV 1.18.2. Before I updated, the highest AACS version was 82, but that wasn't either of the most recent disks (the last working disk was 36 and the first non-working disk was 50). Anyone have any insight on what might be causing this issue?

Drive Information
OS device name: E:
Current profile: BD-ROM
Manufacturer: PIONEER
Product: BD-RW BDR-S13U
Revision: 1.05
Serial number: xxxxxxxx
Firmware date: 2023-08-01
Bus encryption flags: 1B
Highest AACS version: 36

LibreDrive Information
Status: Enabled
Drive platform: RS9201
Firmware name: PIONEER BDR-213T
Firmware type: Original (unpatched)
Firmware version: 1.05/ID43
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

And here is an example that keeps repeating from the log:

002004:0000 Error 'Scsi error - ILLEGAL REQUEST:COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED' occurred while issuing SCSI command AD010..080002400 to device 'SPTI:\Device\CdRom1'
DEBUG: Code 0 at -J6231Kpvy%-_GfBo:213130306
001003:0020 DEBUG: Code 0 at JP0V,W`B0e43*0h<e5:121264395
001003:0020 DEBUG: Code 1 at JP0V,W`B0e43*0h<e5:213130789
002004:0000 Error 'Scsi error - HARDWARE ERROR:INTERNAL TARGET FAILURE' occurred while issuing SCSI command A30..00200740100720..01BD162D532A433C08779091761DA503A76 to device 'SPTI:\Device\CdRom1'
001003:0020 DEBUG: Code 0 at -J6231Kpvy%-_GfBo:213130766
001003:0020 DEBUG: Code 0 at JP0V,W`B0e43*0h<e5:121263429

... which eventually, gives

003306:0000 Can't read AACS VID from disc - most likely current AACS host certificate is revoked by your drive

[mike admin]

Just reboot the drive - viewtopic.php?p=186821#p186821

[creator]

Just reboot the drive - viewtopic.php?p=186821#p186821

Thanks for your response. Unfortunately, rebooting does not resolve the issue. I'm not sure if these messages are helpful, but this is what appears when MakeMKV is Scanning CD-ROM devices:

DEBUG: Code 3221225486 at baW0c/YZ^K,K|GTtwEpS:213130582
DEBUG: Code 4279394306 at ^\4O;l[]cZAB>C:7o:121264878
DEBUG: Code 4278603778 at ^\4O;l[]cZAB>C:7o:121264878
DEBUG: Code 4278603778 at ^\4O;l[]cZAB>C:7o:121264878
DEBUG: Code 4278603778 at ^\4O;l[]cZAB>C:7o:121264878
DEBUG: Code 4278603778 at ^\4O;l[]cZAB>C:7o:121264878
DEBUG: Code 4278603778 at ^\4O;l[]cZAB>C:7o:121264878

Eventually the disk shows up. But then the errors from my original post appear during the Decrypting phase.

[WithoutRhythm]

Have you had any luck here? My BDR-S13U has also stopped working and is giving the following errors.

When first booting up, multiple lines of this:

Code: Select all

DEBUG: Code 4279394306 at jQZW11fA"<#iHILp2:121264878

When attempting to access a blu ray:

Code: Select all

Error 'Scsi error - HARDWARE ERROR:INTERNAL TARGET FAILURE' occurred while issuing SCSI command A30..00200740100720..0C5B80A48CD82035D5163B1B1B530AE1429 to device 'IoKit:/IOBDServices/0C9E1063'
DEBUG: Code 0 at 0~>lvnm&`B9&Di+|]:213130766
DEBUG: Code 0 at vU*<C%q5k#OFKC6+`K:121263429
DEBUG: Code 0 at vU*<C%q5k#OFKC6+`K:213130789

I've installed the latest SDF.bin (I'm on a Mac), I've rebooted, power cycled, etc. and cannot get any blu rays to open properly anymore. This drive was purchased just this summer and was working great up until a couple months ago when it suddenly started throwing these errors (it's in the MercuryPro enclosure recommended by Billy as well).

In case it's useful, here's the drive information:

Code: Select all

Drive Information
OS device name: /dev/rdisk4
Current profile: BD-ROM
Manufacturer: PIONEER
Product: BD-RW BDR-S13U
Revision: 1.05
Serial number: xxxxxxxxxxxx
Firmware date: 2023-08-01
Bus encryption flags: 1B
Highest AACS version: 82

LibreDrive Information
Status: Enabled
Drive platform: RS9201
Firmware name: PIONEER BDR-213T
Firmware type: Original (unpatched)
Firmware version: 1.05/ID43
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

[WithoutRhythm]

Have you had any luck here? My BDR-S13U has also stopped working and is giving the following errors.

When first booting up, multiple lines of this:

Code: Select all

DEBUG: Code 4279394306 at jQZW11fA"<#iHILp2:121264878

When attempting to access a blu ray:

Code: Select all

Error 'Scsi error - HARDWARE ERROR:INTERNAL TARGET FAILURE' occurred while issuing SCSI command A30..00200740100720..0C5B80A48CD82035D5163B1B1B530AE1429 to device 'IoKit:/IOBDServices/0C9E1063'
DEBUG: Code 0 at 0~>lvnm&`B9&Di+|]:213130766
DEBUG: Code 0 at vU*<C%q5k#OFKC6+`K:121263429
DEBUG: Code 0 at vU*<C%q5k#OFKC6+`K:213130789

I've installed the latest SDF.bin (I'm on a Mac), I've rebooted, power cycled, etc. and cannot get any blu rays to open properly anymore. This drive was purchased just this summer and was working great up until a couple months ago when it suddenly started throwing these errors (it's in the MercuryPro enclosure recommended by Billy as well).

In case it's useful, here's the drive information:

Code: Select all

Drive Information
OS device name: /dev/rdisk4
Current profile: BD-ROM
Manufacturer: PIONEER
Product: BD-RW BDR-S13U
Revision: 1.05
Serial number: xxxxxxxxxxxx
Firmware date: 2023-08-01
Bus encryption flags: 1B
Highest AACS version: 82

LibreDrive Information
Status: Enabled
Drive platform: RS9201
Firmware name: PIONEER BDR-213T
Firmware type: Original (unpatched)
Firmware version: 1.05/ID43
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

Just an update on this in case anyone else runs into this issue. I was able to get my drive working by deleting my _private_data.tar file and disabling internet updates in MakeMKV's preferences. I suspect something about the new sdf.bin is not playing nicely with my drive and causing all those problems.

[VECT0R]

I am in the same boat for a Pioneer BDR-S12U and BDR-S13UBK the above fix (deleting _private_data.tar and setting to offline) did not work. I have also tried cleaning the disks (though all of them are brand new out of the packaging) and the readers. I have tried multiple USB ports and both my Linux and MacOS machines. Functionally the same issues regardless of configuration, number of restarts, reader power cycles, etc. Any help would be appreciated.

Issues when initially reading Blu-Rays:

Code: Select all

DEBUG: Code 4279394306 at T{^&lxG%XM81Xv^(-:121264878
DEBUG: Code 4278603778 at T{^&lxG%XM81Xv^(-:121264878
DEBUG: Code 4278603778 at T{^&lxG%XM81Xv^(-:121264878
DEBUG: Code 4278603778 at T{^&lxG%XM81Xv^(-:121264878
DEBUG: Code 4278603778 at T{^&lxG%XM81Xv^(-:121264878
DEBUG: Code 4278603778 at T{^&lxG%XM81Xv^(-:121264878

Issues when attempting direct access:

Code: Select all

Using direct disc access mode
Loaded content hash table, will verify integrity of M2TS files.
Error 'Scsi error - NOT READY:MEDIUM NOT PRESENT' occurred while issuing SCSI command A30..00200740100720..0299B6541B3BA7CEB741857B7D883DD0E73 to device 'IoKit:/IOBDServices/956129E2'
DEBUG: Code 0 at y9yb`|da)(\XIm9jU:213130766
DEBUG: Code 0 at @}C}Kv6i=|1VVrx@<F:121263429
DEBUG: Code 0 at @}C}Kv6i=|1VVrx@<F:213130789
Error 'Scsi error - HARDWARE ERROR:INTERNAL TARGET FAILURE' occurred while issuing SCSI command A30..00200740100720..06CFBCDC1F791C0E859CAD129EA1C623BF1 to device 'IoKit:/IOBDServices/956129E2'
DEBUG: Code 0 at y9yb`|da)(\XIm9jU:213130766
DEBUG: Code 0 at @}C}Kv6i=|1VVrx@<F:121263429
DEBUG: Code 1 at @}C}Kv6i=|1VVrx@<F:213130789
Error 'Scsi error - HARDWARE ERROR:INTERNAL TARGET FAILURE' occurred while issuing SCSI command A30..00200740100720..06FC318FCA520A7FAB36716B23DB05EEA3B to device 'IoKit:/IOBDServices/956129E2'
DEBUG: Code 0 at y9yb`|da)(\XIm9jU:213130766
DEBUG: Code 0 at @}C}Kv6i=|1VVrx@<F:121263429
DEBUG: Code 2 at @}C}Kv6i=|1VVrx@<F:213130789
Error 'Scsi error - HARDWARE ERROR:INTERNAL TARGET FAILURE' occurred while issuing SCSI command A30..00200740100720..047096E18C8D715DB163B43B69115D48E89 to device 'IoKit:/IOBDServices/956129E2'
DEBUG: Code 0 at y9yb`|da)(\XIm9jU:213130766
DEBUG: Code 0 at @}C}Kv6i=|1VVrx@<F:121263429
DEBUG: Code 3 at @}C}Kv6i=|1VVrx@<F:213130789
Error 'Scsi error - HARDWARE ERROR:INTERNAL TARGET FAILURE' occurred while issuing SCSI command A30..00200740100720..023BB410FD5F8AC402DAC05E15AE8E271E6 to device 'IoKit:/IOBDServices/956129E2'
DEBUG: Code 0 at y9yb`|da)(\XIm9jU:213130766
DEBUG: Code 0 at @}C}Kv6i=|1VVrx@<F:121263429
DEBUG: Code 4 at @}C}Kv6i=|1VVrx@<F:213130789

The direct access attempt will continue forever as far as I can tell. When I manually direct it to stop I get:

Code: Select all

Can't read AACS VID from disc - most likely current AACS host certificate is revoked by your drive
DEBUG: Code 0 at f^[`{]=&]1>A-`Qm:121267063
DEBUG: Code 0 at 9KC1[0}=n;Lz) >~:213132721
DEBUG: Code 0 at 9KC1[0}=n;Lz) >~:213131341
Failed to open disc

[Billycar11]

I am in the same boat for a Pioneer BDR-S12U and BDR-S13UBK the above fix (deleting _private_data.tar and setting to offline) did not work. I have also tried cleaning the disks (though all of them are brand new out of the packaging) and the readers. I have tried multiple USB ports and both my Linux and MacOS machines. Functionally the same issues regardless of configuration, number of restarts, reader power cycles, etc. Any help would be appreciated.

Issues when initially reading Blu-Rays:

Code: Select all

DEBUG: Code 4279394306 at T{^&lxG%XM81Xv^(-:121264878
DEBUG: Code 4278603778 at T{^&lxG%XM81Xv^(-:121264878
DEBUG: Code 4278603778 at T{^&lxG%XM81Xv^(-:121264878
DEBUG: Code 4278603778 at T{^&lxG%XM81Xv^(-:121264878
DEBUG: Code 4278603778 at T{^&lxG%XM81Xv^(-:121264878
DEBUG: Code 4278603778 at T{^&lxG%XM81Xv^(-:121264878

Issues when attempting direct access:

Code: Select all

Using direct disc access mode
Loaded content hash table, will verify integrity of M2TS files.
Error 'Scsi error - NOT READY:MEDIUM NOT PRESENT' occurred while issuing SCSI command A30..00200740100720..0299B6541B3BA7CEB741857B7D883DD0E73 to device 'IoKit:/IOBDServices/956129E2'
DEBUG: Code 0 at y9yb`|da)(\XIm9jU:213130766
DEBUG: Code 0 at @}C}Kv6i=|1VVrx@<F:121263429
DEBUG: Code 0 at @}C}Kv6i=|1VVrx@<F:213130789
Error 'Scsi error - HARDWARE ERROR:INTERNAL TARGET FAILURE' occurred while issuing SCSI command A30..00200740100720..06CFBCDC1F791C0E859CAD129EA1C623BF1 to device 'IoKit:/IOBDServices/956129E2'
DEBUG: Code 0 at y9yb`|da)(\XIm9jU:213130766
DEBUG: Code 0 at @}C}Kv6i=|1VVrx@<F:121263429
DEBUG: Code 1 at @}C}Kv6i=|1VVrx@<F:213130789
Error 'Scsi error - HARDWARE ERROR:INTERNAL TARGET FAILURE' occurred while issuing SCSI command A30..00200740100720..06FC318FCA520A7FAB36716B23DB05EEA3B to device 'IoKit:/IOBDServices/956129E2'
DEBUG: Code 0 at y9yb`|da)(\XIm9jU:213130766
DEBUG: Code 0 at @}C}Kv6i=|1VVrx@<F:121263429
DEBUG: Code 2 at @}C}Kv6i=|1VVrx@<F:213130789
Error 'Scsi error - HARDWARE ERROR:INTERNAL TARGET FAILURE' occurred while issuing SCSI command A30..00200740100720..047096E18C8D715DB163B43B69115D48E89 to device 'IoKit:/IOBDServices/956129E2'
DEBUG: Code 0 at y9yb`|da)(\XIm9jU:213130766
DEBUG: Code 0 at @}C}Kv6i=|1VVrx@<F:121263429
DEBUG: Code 3 at @}C}Kv6i=|1VVrx@<F:213130789
Error 'Scsi error - HARDWARE ERROR:INTERNAL TARGET FAILURE' occurred while issuing SCSI command A30..00200740100720..023BB410FD5F8AC402DAC05E15AE8E271E6 to device 'IoKit:/IOBDServices/956129E2'
DEBUG: Code 0 at y9yb`|da)(\XIm9jU:213130766
DEBUG: Code 0 at @}C}Kv6i=|1VVrx@<F:121263429
DEBUG: Code 4 at @}C}Kv6i=|1VVrx@<F:213130789

The direct access attempt will continue forever as far as I can tell. When I manually direct it to stop I get:

Code: Select all

Can't read AACS VID from disc - most likely current AACS host certificate is revoked by your drive
DEBUG: Code 0 at f^[`{]=&]1>A-`Qm:121267063
DEBUG: Code 0 at 9KC1[0}=n;Lz) >~:213132721
DEBUG: Code 0 at 9KC1[0}=n;Lz) >~:213131341
Failed to open disc

try cleaning the laser