SDFtool Flasher

[callumw]

First time trying this with a UHD drive (my old bluray still works like a champ)
The PC looks like it recognises discs ok, but in MakeMKV it doesn't look right.
It sees the drive as:

Drive Information
OS device name: F:
Manufacturer: 000000
Product: 9999999999999999
Revision: 1.05
Serial number: MOFP7MD4032
Firmware date: 2124-04-23 13:47
Bus encryption flags: 17
Highest AACS version: 81

The drive label says : Hitachi-LG BU40N
Manufactured: July 2025
Firmware Version 1.05

The SDFTool pops up an error when I tried to backup the fimware:
"The drive you have selected does not have the correct drive platform (MT 1959) and cannot be flashed"

Screenshot 2025-12-06 211101.jpg

Would I be right in thinking the problem is the cable I'm got for it?
It's SATA > USB

Drive: https://www.amazon.co.uk/dp/B071CPRK74
Cable: https://www.amazon.co.uk/dp/B073QNN1C5

[Billycar11]

First time trying this with a UHD drive (my old bluray still works like a champ)
The PC looks like it recognises discs ok, but in MakeMKV it doesn't look right.
It sees the drive as:

Drive Information
OS device name: F:
Manufacturer: 000000
Product: 9999999999999999
Revision: 1.05
Serial number: MOFP7MD4032
Firmware date: 2124-04-23 13:47
Bus encryption flags: 17
Highest AACS version: 81

The drive label says : Hitachi-LG BU40N
Manufactured: July 2025
Firmware Version 1.05

The SDFTool pops up an error when I tried to backup the fimware:
"The drive you have selected does not have the correct drive platform (MT 1959) and cannot be flashed"
Screenshot 2025-12-06 211101.jpg

Would I be right in thinking the problem is the cable I'm got for it?
It's SATA > USB

Drive: https://www.amazon.co.uk/dp/B071CPRK74
Cable: https://www.amazon.co.uk/dp/B073QNN1C5

Your case is junk get a recommend adapter from the guide below and a sata to slim sata adapter and it will work

[BryanS]

I have a BP60NB10 drive that I flashed and it was working great. Drive stated having issues reading discs, so LG said I can send it back to get it replaced since it is under warranty. But in order to do that I need to flash the original firmware back on it. Is that something I can do? If so, how? I was looking at the recover option, but when it comes to selecting the correct new firmware, I didn't know what I would choose.

Any help would be appreciated

Thanks,
Bryan

[Bumbles]

All working as hoped. However, if you try to flash the drive while the disk drive tray is ejected SDFTool throws an error with an error number. Would it be possible to check the status of the drive tray and throw a more human readable error if it's currently out?

[callumw]

First time trying this with a UHD drive (my old bluray still works like a champ)
The PC looks like it recognises discs ok, but in MakeMKV it doesn't look right.

Returned the drive and replaced it with a Verbatim 43888 ( https://www.amazon.co.uk/dp/B07MTP9VKX )
Much much nicer drive and comes with the cables and adapter options.

Easy firmware backup then install of DE_LG_BU40N_1.03_MK.bin
Currently testing with our Apollo11 UHD disk and it's doing its thing.

Thanks @Billycar11 for the nudge in the right direction

Pre:

Drive Information
OS device name: F:
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.05
Serial number: poipoipopoi
Firmware date: 2124-04-23 13:47
Bus encryption flags: 17
Highest AACS version: 81

Post:

Drive Information
OS device name: F:
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.03
Serial number: poipoipopoi
Firmware date: 2118-10-24 19:34
Bus encryption flags: 17
Highest AACS version: 81

[MartyMcNuts]

All working as hoped. However, if you try to flash the drive while the disk drive tray is ejected SDFTool throws an error with an error number. Would it be possible to check the status of the drive tray and throw a more human readable error if it's currently out?

Um, no. It is just a GUI for the sdftool CLI so whatever error it spits out is it.

[merlinthesage]

When I load up SDFtool Flasher 1.3.6
it says my drive isnt a MT1959?
How do I fix this? It should be a 1959 drive

Drive Information
OS device name: J:
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.02
Serial number: MO7P5692121
Firmware date: 2120-12-01 17:16
Bus encryption flags: 1F

LibreDrive Information
Status: Possible (with patched firmware)
Drive platform: MT1959
Harware support: Yes
Firmware support: No
Firmware type: Original (patched version available)
Firmware version: 1.02
DVD all regions: Possible (with patched firmware)
BD raw data read: Possible (with patched firmware)
BD raw metadata read: Possible (with patched firmware)
Unrestricted read speed: Possible (with patched firmware)

is something wrong?

[RFAurora]

I downloaded the sdftool flasher for my PC to try and use it for my Blu-Ray player, but when I open the tool, the box opens like this and I can't resize it to use it I have a Windows 11 PC.

[blind-s33r]

I downloaded the sdftool flasher for my PC to try and use it for my Blu-Ray player, but when I open the tool, the box opens like this and I can't resize it to use it I have a Windows 11 PC.

Cough

Code: Select all

NOTE: If the GUI looks a bit deformed (happens on a 4k monitor), you can right click the exe and select properties. In the compatibility tab, click "Change high DPI settings" then under "High DPI scaling override" tick the box and select "System (Enhanced)" in the dropbox.

Cough

[RFAurora]

I downloaded the sdftool flasher for my PC to try and use it for my Blu-Ray player, but when I open the tool, the box opens like this and I can't resize it to use it I have a Windows 11 PC.

Cough

Code: Select all

NOTE: If the GUI looks a bit deformed (happens on a 4k monitor), you can right click the exe and select properties. In the compatibility tab, click "Change high DPI settings" then under "High DPI scaling override" tick the box and select "System (Enhanced)" in the dropbox.

Cough

Thank you.

[McMurphy66]

Thank you Marty, I finally received my UHD blu rays from storage and the Buffalo flashed drive works a treat - faster than expected. I really do appreciate all the work you do! Be lucky.

[quote=McMurphy66 post_id=189135 time=<a href="tel:1764735582">1764735582</a> user_id=104006]
Apologies if this is in the wrong thread…newbie post but not new to the amazing makemkv software.
Bought the Buffalo BRUHD-PU3-BK. Read through the threads and wasn’t sure if it was BUN-40 flash process. I’m confused what to use, not done this before.
Thanks all.

Drive Information
OS device name: E:
Manufacturer: BUFFALO
Product: Optical Drive
Revision: BN14
Serial number:
Firmware date: 2121-06-21 13:33
Bus encryption flags: 1F
Highest AACS version: 48

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959

No disc inserted

Yes, it's a BU40N. You can flash it to BU40N 1.03-MK.

Thank you Marty, I really appreciate your reply.
I’ll use the LG BU40N 1.03mk. Is it simply ‘select drive’ “select write’ open this firmware from the pack and start?
[/quote]

[MartyMcNuts]

Thank you Marty, I finally received my UHD blu rays from storage and the Buffalo flashed drive works a treat - faster than expected. I really do appreciate all the work you do! Be lucky.

[quote=McMurphy66 post_id=189135 time=<a href="tel:1764735582">1764735582</a> user_id=104006]
Apologies if this is in the wrong thread…newbie post but not new to the amazing makemkv software.
Bought the Buffalo BRUHD-PU3-BK. Read through the threads and wasn’t sure if it was BUN-40 flash process. I’m confused what to use, not done this before.
Thanks all.

Drive Information
OS device name: E:
Manufacturer: BUFFALO
Product: Optical Drive
Revision: BN14
Serial number:
Firmware date: 2121-06-21 13:33
Bus encryption flags: 1F
Highest AACS version: 48

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959

No disc inserted

Yes, it's a BU40N. You can flash it to BU40N 1.03-MK.

Thank you Marty, I really appreciate your reply.
I’ll use the LG BU40N 1.03mk. Is it simply ‘select drive’ “select write’ open this firmware from the pack and start?

[/quote]

Yep.

[ArifHubble23]

Please don't shoot me! I am rather computer illiterate! Apologies to anyone who has a migraine from the questions I am about to ask.

New drive: Verbatim 43890 USB 3.2
Issue: not reading UHD 4K discs but can see the disc title on PC- Make MKV 'hash error' occurs

Make MKV drive log:

Drive Information
OS device name: D:
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.05
Serial number: MO1P6AE5410
Firmware date: 2124-04-23 13:47
Bus encryption flags: 17
Highest AACS version: 77

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959

No disc inserted

If someone could advise on what firmware to flash to this drive to enable UHD compatibility I would be grateful. Much thanks.

[Mr_Orange]

Please don't shoot me! I am rather computer illiterate! Apologies to anyone who has a migraine from the questions I am about to ask.

New drive: Verbatim 43890 USB 3.2
Issue: not reading UHD 4K discs but can see the disc title on PC- Make MKV 'hash error' occurs

Make MKV drive log:

Drive Information
OS device name: D:
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.05
Serial number: MO1P6AE5410
Firmware date: 2124-04-23 13:47
Bus encryption flags: 17
Highest AACS version: 77

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959

No disc inserted

If someone could advise on what firmware to flash to this drive to enable UHD compatibility I would be grateful. Much thanks.

Flash BU40N 1.03MK.

[ArifHubble23]

Many thanks!