Is my BU40N firmware OK ?

Forum for discussions about UHD-capable dives
Post Reply
georgesgiralt
Posts: 62
Joined: Thu Jun 04, 2020 12:40 pm

Is my BU40N firmware OK ?

Post by georgesgiralt » Tue Aug 27, 2024 3:58 pm

Hello,
A friend of mine gave me this one :

Code: Select all

Informations lecteur
Nom du lecteur SE : /dev/sr0
Fabricant : HL-DT-ST
Produit : BD-RE BU40N
Révision : 1.03
Numéro de série : XXXXXXXXXXXXXX
Date micrologiciel : 2118-10-24 19:34
Marqueurs d'encryptage bus : 17
Version AACS la plus haute : 77

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.03
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes
Is it the "BU40N 1.03MK" firmware ? There is no MK anywhere....
Sorry if this is a dumb question.

Billycar11
Posts: 4351
Joined: Sun Aug 24, 2014 5:49 am

Re: Is my BU40N firmware OK ?

Post by Billycar11 » Tue Aug 27, 2024 6:54 pm

Does it rip UHD discs if so it's fine
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com

georgesgiralt
Posts: 62
Joined: Thu Jun 04, 2020 12:40 pm

Re: Is my BU40N firmware OK ?

Post by georgesgiralt » Wed Aug 28, 2024 9:07 am

I did not try it yet since I do not own any 4K BD.

Coopervid
Posts: 1931
Joined: Tue Feb 19, 2019 10:32 pm

Re: Is my BU40N firmware OK ?

Post by Coopervid » Wed Aug 28, 2024 9:42 am

georgesgiralt wrote:
Tue Aug 27, 2024 3:58 pm
Hello,
A friend of mine gave me this one :

Code: Select all

Informations lecteur
Nom du lecteur SE : /dev/sr0
Fabricant : HL-DT-ST
Produit : BD-RE BU40N
Révision : 1.03
Numéro de série : XXXXXXXXXXXXXX
Date micrologiciel : 2118-10-24 19:34
Marqueurs d'encryptage bus : 17
Version AACS la plus haute : 77

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.03
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes
Is it the "BU40N 1.03MK" firmware ? There is no MK anywhere....
Sorry if this is a dumb question.
Yes it is. That firmware is in the "OLD" folder.

MartyMcNuts
Posts: 2883
Joined: Wed Nov 22, 2017 11:45 pm

Re: Is my BU40N firmware OK ?

Post by MartyMcNuts » Wed Aug 28, 2024 9:51 am

georgesgiralt wrote:
Tue Aug 27, 2024 3:58 pm
Hello,
A friend of mine gave me this one :

Code: Select all

Informations lecteur
Nom du lecteur SE : /dev/sr0
Fabricant : HL-DT-ST
Produit : BD-RE BU40N
Révision : 1.03
Numéro de série : XXXXXXXXXXXXXX
Date micrologiciel : 2118-10-24 19:34
Marqueurs d'encryptage bus : 17
Version AACS la plus haute : 77

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.03
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes
Is it the "BU40N 1.03MK" firmware ? There is no MK anywhere....
Sorry if this is a dumb question.
Firmware type: Patched (microcode access re-enabled)

If ithe firmware type is "Patched" then it is a MK firmware. You are good to go. Start ripping!
Cheers :D
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG + Others) & DIY Single Drive Flasher (WW): https://uhdenableddrives.com

georgesgiralt
Posts: 62
Joined: Thu Jun 04, 2020 12:40 pm

Re: Is my BU40N firmware OK ?

Post by georgesgiralt » Wed Aug 28, 2024 4:02 pm

Thank you all ! I couldn't sleep ;-)

Post Reply