Forum for discussions about UHD-capable dives
-
d00zah
- Posts: 1581
- Joined: Mon Jun 06, 2016 8:23 pm
#2296
Post
by d00zah » Tue Apr 23, 2024 7:20 pm
Enrique8712 wrote: ↑Tue Apr 23, 2024 6:38 pm
Hello, I've read this guide a couple of times but still feel a little confused because of how it is worded. Could someone help me? I just want to know which one I can buy right now and flash it and have it working? If anyone can help me with this, I would really appreciate the help! I don't want to buy the wrong one and have to keep returning them.
Start here:
Drives for sale, Flashing Services, where to buy...
Choose a buyer in your region & contact them via email (usually in the 1st post of the thread) about what you are looking for, current stock, etc..
-
lifesgucci
- Posts: 1
- Joined: Mon Apr 29, 2024 12:43 pm
#2297
Post
by lifesgucci » Mon Apr 29, 2024 12:47 pm
ack i found an lg WH14NS40 for $40 in a local store and didn't check the date. it's jan 2015. how borked am i? is it's possible to uhd flash or should i just leave it alone?
-
d00zah
- Posts: 1581
- Joined: Mon Jun 06, 2016 8:23 pm
#2298
Post
by d00zah » Mon Apr 29, 2024 1:10 pm
lifesgucci wrote: ↑Mon Apr 29, 2024 12:47 pm
ack i found an lg WH14NS40 for $40 in a local store and didn't check the date. it's jan 2015. how borked am i? is it's possible to uhd flash or should i just leave it alone?
Too old... just leave it alone. >Oct 2015 is the target.
-
infectedrain
- Posts: 3
- Joined: Mon Apr 29, 2024 9:58 pm
#2299
Post
by infectedrain » Mon Apr 29, 2024 10:12 pm
Model Name : PIONEER BD-RW BDR-UD03D
Firmware Rev : 1.00
Extra Info : 14/05/14 PIONEER
Hi
Is there a chance to convert it to UHD friendly drive?
-
Billycar11
- Posts: 4309
- Joined: Sun Aug 24, 2014 5:49 am
#2300
Post
by Billycar11 » Tue Apr 30, 2024 2:50 am
infectedrain wrote: ↑Mon Apr 29, 2024 10:12 pm
Model Name : PIONEER BD-RW BDR-UD03D
Firmware Rev : 1.00
Extra Info : 14/05/14 PIONEER
Hi
Is there a chance to convert it to UHD friendly drive?
yeah email me i have an automated flasher for that
-
Azathanai
- Posts: 2
- Joined: Wed May 01, 2024 12:48 am
#2302
Post
by Azathanai » Wed May 01, 2024 12:51 am
I'm a bit confused by this guide. Does the section "drives that Currently work are:" mean that the drives in this list are capable of ripping 4k straight from the box?
-
MartyMcNuts
- Posts: 2852
- Joined: Wed Nov 22, 2017 11:45 pm
#2303
Post
by MartyMcNuts » Wed May 01, 2024 1:50 am
Azathanai wrote: ↑Wed May 01, 2024 12:51 am
I'm a bit confused by this guide. Does the section "drives that Currently work are:" mean that the drives in this list are capable of ripping 4k straight from the box?
No. The Pioneer models work if they are on older firmware (pre Dec 2022). Essentially all of them now require flashing (no publicly available flasher for Pioneer drives) as they have newer firmware.
Cheers
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG + Others) & DIY Single Drive Flasher (WW):
https://uhdenableddrives.com
-
Azathanai
- Posts: 2
- Joined: Wed May 01, 2024 12:48 am
#2304
Post
by Azathanai » Wed May 01, 2024 4:57 am
MartyMcNuts wrote: ↑Wed May 01, 2024 1:50 am
Azathanai wrote: ↑Wed May 01, 2024 12:51 am
I'm a bit confused by this guide. Does the section "drives that Currently work are:" mean that the drives in this list are capable of ripping 4k straight from the box?
No. The Pioneer models work if they are on older firmware (pre Dec 2022). Essentially all of them now require flashing (no publicly available flasher for Pioneer drives) as they have newer firmware.
Can every drive be flashed by the guide given under " How To Flash Videos and commands:"? If not, which ones can?
-
MartyMcNuts
- Posts: 2852
- Joined: Wed Nov 22, 2017 11:45 pm
#2305
Post
by MartyMcNuts » Wed May 01, 2024 11:47 pm
Azathanai wrote: ↑Wed May 01, 2024 4:57 am
MartyMcNuts wrote: ↑Wed May 01, 2024 1:50 am
Azathanai wrote: ↑Wed May 01, 2024 12:51 am
I'm a bit confused by this guide. Does the section "drives that Currently work are:" mean that the drives in this list are capable of ripping 4k straight from the box?
No. The Pioneer models work if they are on older firmware (pre Dec 2022). Essentially all of them now require flashing (no publicly available flasher for Pioneer drives) as they have newer firmware.
Can every drive be flashed by the guide given under " How To Flash Videos and commands:"? If not, which ones can?
LG/ASUS drives can using the flashing methods mentioned in the guide.
Cheers
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG + Others) & DIY Single Drive Flasher (WW):
https://uhdenableddrives.com
-
Tom899
- Posts: 20
- Joined: Mon Dec 30, 2019 5:45 pm
#2306
Post
by Tom899 » Sat May 04, 2024 7:48 pm
I purchased a Pioneer BDR-213/2213 SATA 5.25 SATA with BDR-S13UBK Firmware from Billycar11 in March of this year. I also purchased an LG Electronics WH16NS40 drive from Amazon and flashed it myself. I had an ASUS drive prior for a few years that finally crapped out.
Anyway, I've been using both the LG and Pioneer drives to rip discs, both in Vantec cases, mostly 4K, some Blu-Ray and a few DVD. The LG is a little faster and noisier than the Pioneer.
BUT, I tell you what, The Pioneer is the Top Dog! There have been a number of instances where the LG has practically stalled out and I had to abort, it slowed down to a crawl and said 7 hours left (you know what I mean). I go right to the Pioneer and faithfully get a good rip with no problems!
If you are looking for one drive to get, get a Pioneer from Billycar11 and be done with it. I'm highly satisfied with the Pioneer and Billycar11 customer service.
Tom
-
Prophacesi
- Posts: 1
- Joined: Sat May 04, 2024 8:29 pm
#2307
Post
by Prophacesi » Sat May 04, 2024 8:38 pm
I had flashed my BP50NB40 to BP50NB40-NB50-1.03MK with the SDFtool Flasher, but still couldn't read UHD discs. I found your guide and realized I needed to flash from where I was up to BP60NB10 1.02MK. I did that in the flasher also, everything works now!
Thank you!
-
taipei72
- Posts: 2
- Joined: Mon May 06, 2024 12:26 pm
#2308
Post
by taipei72 » Mon May 06, 2024 1:30 pm
Hello,
First time here... Been going through this post.. Lot of valuable info...
I just purchased a Archgon.. Is it possible to flash to get it to work... I am little new at this.. Here us the info on my drive
Drive Information
OS device name: /dev/rdisk4
Current profile: CD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.02
Serial number: MO2N95D5557
Firmware date: 2120-12-01 17:16
Bus encryption flags: 1F
Highest AACS version: 77
LibreDrive Information
Status: Possible (with patched firmware)
Drive platform: MT1959
Harware support: Yes
Firmware support: No
Firmware type: Original (patched version available)
Firmware version: 1.02
DVD all regions: Possible (with patched firmware)
BD raw data read: Possible (with patched firmware)
BD raw metadata read: Possible (with patched firmware)
Unrestricted read speed: Possible (with patched firmware)
Disc Information
Label: 010802_1617
Timestamp: 2001-08-03 16:38:12
Data capacity: 0.63 Gb
BTW, I did do the extract HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934 and on Mac terminal, I ran all the way till step 7 and it said it is 100% complete, but when I open the drive it ti shows above with 1.02
Am I missing something post the flash???
What did I do wrong..
Thank you in advance...
-
saskiuhia
- Posts: 1
- Joined: Mon May 06, 2024 10:38 am
#2309
Post
by saskiuhia » Mon May 06, 2024 3:38 pm
Hello everone.
I just bought an LG BU40N drive and was trying to flash it.
MakeMKV doesn't show platform and LibreDrive info:
Drive Information
OS device name: D:
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: BN14
Serial number: ***
Firmware date: 2121-06-21 13:33
Bus encryption flags: 1F
Highest AACS version: 78
No disc inserted
SPFtool Flasher don't allow me to do anything because it think that it isn't MT1959 platform.
I just don't understand what's wrong with it.
-
Billycar11
- Posts: 4309
- Joined: Sun Aug 24, 2014 5:49 am
#2310
Post
by Billycar11 » Tue May 07, 2024 2:34 am
saskiuhia wrote: ↑Mon May 06, 2024 3:38 pm
Hello everone.
I just bought an LG BU40N drive and was trying to flash it.
MakeMKV doesn't show platform and LibreDrive info:
Drive Information
OS device name: D:
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: BN14
Serial number: ***
Firmware date: 2121-06-21 13:33
Bus encryption flags: 1F
Highest AACS version: 78
No disc inserted
SPFtool Flasher don't allow me to do anything because it think that it isn't MT1959 platform.
I just don't understand what's wrong with it.
yes the buffalo cases do that you will have to use cli or get an auto flasher.