Depends on the drive
But usually one of the de firmware from my pack
Depends on the drive
There's a whole thread about recent Pioneer firmware specifically disabling MakeMKV support. At the moment, once a Pioneer drive gets on the recent firmware, you're stuck.kululu wrote: ↑Sun Oct 22, 2023 6:29 amHello
Anyone can use Pioneer BDR-X13J-S in MKVmaker?Change Rom after can’t use it to rip 4K UHD, Thanks
Drive Information
OS device name: E:
Current profile: BD-ROM
Manufacturer: PIONEER
Product: BD-RW BDR -X13U
Revision: 1.03
Firmware date: 2022-12-12
Bus encryption flags: 18
Highest AACS version: 78
LibreDrive Information
Status: Possible, not yet enabled Drive platform: Pioneer RS9401
Firmware version: ID43
Code: Select all
root@176acc477e6a:/usr/local/bin# ./sdftool --version
LibDriveIo/SdfTool version: 2.6
root@176acc477e6a:/usr/local/bin# ./sdftool --drive=dev_21:2 --info
SDF.bin version: 0x0097
Drive Tool SDF present
Drive Specific SDF present
[Drive Specific SDF] Embedded Info Strings:
8000:LibreDrive Information
8013:Status
8109:Possible (with patched firmware)
[b][i]8001:Drive platform :MT1959[/i][/b]
8010:Harware support
8100:Yes
8011:Firmware support
8101:No
8002:Firmware type
8108:Original (patched version available)
8003:Firmware version:1.05
8005:DVD all regions
8109:Possible (with patched firmware)
8006:BD raw data read
8109:Possible (with patched firmware)
8007:BD raw metadata read
8109:Possible (with patched firmware)
8009:Unrestricted read speed
8109:Possible (with patched firmware)
[Drive Specific SDF] Embedded Status Message:
8096:LibreDrive mode for this drive is only possible with firmware upgrade (id=%1):36338EC9581D
Identification SDF present
[Identification SDF] Embedded Info Strings:
8000:LibreDrive Information
8013:Status
8102:Possible, not yet enabled
[b][i]8001:Drive platform :MT1959[/i][/b]
[Identification SDF] Drive autodetect string:mtk:[b][i]19:59[/i][/b]:JB8 :HL-DT-ST:BD-RE WH16NS40 1.05:N000900:-
root@176acc477e6a:/usr/local/bin#
Code: Select all
./sdftool f --device=dev_21:2 dump --out=./HL-DT-ST-BD-RE _WH16NS40-1.05-N000900.bin
Code: Select all
./sdftool f --device=dev_21:2 [b]enc[/b] --in=./HL-DT-ST-BD-RE_WH16NS60-1.03-NM00600-212005081010.bin <<== from the mk-firmware-pack-20200720
It's obviously not brand new as it's already been cross-flashed!!n7qpp wrote: ↑Thu Oct 26, 2023 8:14 pmI just purchased a WP50NB40 from Amazon Warehouse. MKV shows this about the drive:
Drive Information
OS device name: I:
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.00
Serial number: SIK04N1UJ4914
Firmware date: 2116-12-20 15:28
Bus encryption flags: 17
LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Original (unpatched)
Firmware version: 1.00
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Ye
Unrestricted read speed: Yes[/list][/list]
The sticker shows:
S/N 301HSXJ016986
ROM VER: 1.03
Joe (new to the broad)
lol i wonder who returned thatMartyMcNuts wrote: ↑Thu Oct 26, 2023 9:41 pmIt's obviously not brand new as it's already been cross-flashed!!n7qpp wrote: ↑Thu Oct 26, 2023 8:14 pmI just purchased a WP50NB40 from Amazon Warehouse. MKV shows this about the drive:
Drive Information
OS device name: I:
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.00
Serial number: SIK04N1UJ4914
Firmware date: 2116-12-20 15:28
Bus encryption flags: 17
LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Original (unpatched)
Firmware version: 1.00
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Ye
Unrestricted read speed: Yes[/list][/list]
The sticker shows:
S/N 301HSXJ016986
ROM VER: 1.03
Joe (new to the broad)
Have you tried a UHD disc yet?
Leave it as is
Failed my testing but I test with hard to read discs so it might be fine for you or you might find out why it was sent back
SDFtoolFlasher link is active for me... something (AV, etc) blocking?WandStick9898 wrote: ↑Wed Nov 01, 2023 4:07 pm...
In this post, I scrolled down to the MediaFire link to the latest tool, and am getting a "Can't reach that page".
The firmware pack came down just fine, but that one I can't seem to grab. Has the link changed and referenced in a different post?
My bad - it must have been a local firewall thing. Got the file fine from my phone. Thanks for the quick response.d00zah wrote: ↑Wed Nov 01, 2023 4:18 pmSDFtoolFlasher link is active for me... something (AV, etc) blocking?WandStick9898 wrote: ↑Wed Nov 01, 2023 4:07 pm...
In this post, I scrolled down to the MediaFire link to the latest tool, and am getting a "Can't reach that page".
The firmware pack came down just fine, but that one I can't seem to grab. Has the link changed and referenced in a different post?
https://www.mediafire.com/file/rak1mk0p ... 9.zip/file