UH12NS40

Forum for discussions about UHD-capable dives
Post Reply
Johnqmalapert
Posts: 15
Joined: Sun Mar 12, 2023 2:04 am

UH12NS40

Post by Johnqmalapert »

I have seen a couple threads where people got this drive able to rip 4k discs. I'm super confused by this process. I downloaded the bh14ns40 patch tool exe from this thread
viewtopic.php?t=19780
and used the included firmware bin file. It gave me the error at the end. Makemkv reports same data as before. pic below

I ran the SDtoolflasher (v1.3.5) but the only firmware in the "all you need fw pack" only had the WH16NS60 fw in it. Pic below. Should I use this?

Or should I use the cmd prompt instead as the YT video demos?

Thanks!
Attachments
2023-03-11 21_02_13-Window.jpg
2023-03-11 21_02_13-Window.jpg (38.38 KiB) Viewed 5540 times
original.jpg
original.jpg (104.83 KiB) Viewed 5540 times
Billycar11
Posts: 4336
Joined: Sun Aug 24, 2014 5:49 am

Re: UH12NS40

Post by Billycar11 »

Johnqmalapert wrote:
Sun Mar 12, 2023 2:13 am
I have seen a couple threads where people got this drive able to rip 4k discs. I'm super confused by this process. I downloaded the bh14ns40 patch tool exe from this thread
viewtopic.php?t=19780
and used the included firmware bin file. It gave me the error at the end. Makemkv reports same data as before. pic below

I ran the SDtoolflasher (v1.3.5) but the only firmware in the "all you need fw pack" only had the WH16NS60 fw in it. Pic below. Should I use this?

Or should I use the cmd prompt instead as the YT video demos?

Thanks!
it will probably work on wh16ns60 fw let us know and i'll update the guide
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
Johnqmalapert
Posts: 15
Joined: Sun Mar 12, 2023 2:04 am

Re: UH12NS40

Post by Johnqmalapert »

no harm if it doesn't work?
Billycar11
Posts: 4336
Joined: Sun Aug 24, 2014 5:49 am

Re: UH12NS40

Post by Billycar11 »

Johnqmalapert wrote:
Sun Mar 12, 2023 2:51 am
no harm if it doesn't work?
could die but not likely as its mt1959
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
Johnqmalapert
Posts: 15
Joined: Sun Mar 12, 2023 2:04 am

Re: UH12NS40

Post by Johnqmalapert »

Ok, seems to have worked (i think), pic below.
2023-03-16 10_42_58-Window.jpg
2023-03-16 10_42_58-Window.jpg (39.98 KiB) Viewed 5439 times
1st disk ripped successfully, while the 2nd/3rd have reported read errors. They seem to be hardware related. Does it seem that way to you? I've been using the backup option.

MakeMKV v1.17.3 win(x64-release) started
Using LibreDrive mode (v06.3 id=7FA2657C7667)
Backing up disc into folder "//diskstation/movies/
Loaded content hash table, will verify integrity of M2TS files.
Error 'Scsi error - MEDIUM ERROR:L-EC UNCORRECTABLE ERROR' occurred while reading '/BDMV/STREAM/00013.m2ts' at offset '2187264000'
Failed to save title /BDMV/STREAM/00013.m2ts to file //diskstation/movies/
Error 'Scsi error - HARDWARE ERROR:TIMEOUT ON LOGICAL UNIT' occurred while reading '/BDMV/STREAM/00008.m2ts' at offset '12924352512'
Failed to save title /BDMV/STREAM/00008.m2ts to file //diskstation/movies/
Encountered 17 errors of type 'Read Error' - see http://www.makemkv.com/errors/read/
Backup done but 2 files failed hash check
Billycar11
Posts: 4336
Joined: Sun Aug 24, 2014 5:49 am

Re: UH12NS40

Post by Billycar11 »

Yeah you can try cleaning the discs other than that cleaning or replacing the drive

But I will add that drive to the guide
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
Johnqmalapert
Posts: 15
Joined: Sun Mar 12, 2023 2:04 am

Re: UH12NS40

Post by Johnqmalapert »

thanks. Any resources on the best way to clean the drive?
Billycar11
Posts: 4336
Joined: Sun Aug 24, 2014 5:49 am

Re: UH12NS40

Post by Billycar11 »

Johnqmalapert wrote:
Sun Mar 19, 2023 4:53 pm
thanks. Any resources on the best way to clean the drive?
yeah take it apart
only 4 screws hold it together and the front bezel unclips
then clean laser with alcohol and dry it
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
Johnqmalapert
Posts: 15
Joined: Sun Mar 12, 2023 2:04 am

Re: UH12NS40

Post by Johnqmalapert »

@Billy fyi the drive/firmware does NOT work with DVDFab 12.1.0.1. It is giving errors about "unfriendly firmware".
Billycar11
Posts: 4336
Joined: Sun Aug 24, 2014 5:49 am

Re: UH12NS40

Post by Billycar11 »

Johnqmalapert wrote:
Mon Mar 20, 2023 2:23 am
@Billy fyi the drive/firmware does NOT work with DVDFab 12.1.0.1. It is giving errors about "unfriendly firmware".
i know that dvdfab bad anyway

but if you want to use worse ripper go to wh16ns60 1.00 in my de pack
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
Johnqmalapert
Posts: 15
Joined: Sun Mar 12, 2023 2:04 am

Re: UH12NS40

Post by Johnqmalapert »

Thanks! No I'm happy with mkv just sending that info for your documentation.
Post Reply