SDFtool Flasher

[Rookie]

Hello @all,
unfortunately I also get this error message when I try to downgrade my new internal desktop drive ==> ASUS BC-12H2FT / firmware 3.12 to firmware 3.00 in the package.

It is a fresh Win11 installation, the app was started with a local admin user.
With Win10 before same procedure / same error.

With kind regards
Tommy

[Billycar11]

Hello @all,
unfortunately I also get this error message when I try to downgrade my new internal desktop drive ==> ASUS BC-12H2FT / firmware 3.12 to firmware 3.00 in the package.

It is a fresh Win11 installation, the app was started with a local admin user.
With Win10 before same procedure / same error.

With kind regards
Tommy

Flash to Asus 3.10 first

[Rookie]

Hello @all,

the solution was not to use the DE firmware but the MK firmware version.

==> DE firmware cannot downgrade from 3.12 | DE_ASUS_BC-12D2HT_3.00.bin
==> MK firmware successfully downgraded from 3.12 | ASUS-BC-12B1ST_b-3.11-WM00300-211902271321.bin

MK firmware version for ASUS_BC-12D2HT in version 3.11 works, first UHD BD-ROM read successfully.

After that I did not try the DE version at all.

with kind regards
Tommy

[kurinukes]

Hello everyone,

recently came arcross this LibreDrive thing. Then I saw that apprently my drive is LibreDrive possible. Then came across the SDFtool to flash the firmware, but whenever I try to use, it just throws an Error (0x82052400). I tried searching online but couldn't find anything about it...
So I was wondering If anyone here has any idea what the error means or what maybe I could do about it?

I tried "HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin" same error.
I tried "HL-DT-ST-BD-RE_BU40N-1.04-NM00500-212005061142.bin" same error.
I aslo tried "DE_LG_BU40N_1.00.bin" same error.

Tried encryption on/off same error.

I'm kinda out off ideas..any help is welome. Much thanks.

I should add that it is an external Drive

[Coopervid]

Most likely your chip in the enlosure doesn't support flashing.

[danzerman]

hello I cannot open the installer any ideas anyone

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

Code: Select all

************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
   at SDFtool_Flasher_Updated.Form1.Check_MakeMKV_Installation()
   at SDFtool_Flasher_Updated.Form1.Form1_Load(Object sender, EventArgs e)
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, WM msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
System.Private.CoreLib
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
SDFtool Flasher
    Assembly Version: 1.3.5.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Runtime
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Windows.Forms
    Assembly Version: 6.0.2.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Windows.Forms.Primitives
    Assembly Version: 6.0.2.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.ComponentModel.Primitives
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Runtime.InteropServices
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Drawing.Primitives
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Collections.Specialized
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Drawing.Common
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Threading
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Diagnostics.TraceSource
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Collections
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Diagnostics.Process
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
Microsoft.Win32.Primitives
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.ComponentModel.EventBasedAsync
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Threading.Thread
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
Accessibility
    Assembly Version: 4.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.ComponentModel.TypeConverter
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Numerics.Vectors
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Memory
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.ComponentModel
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Resources.Extensions
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Drawing
    Assembly Version: 6.0.2.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.ObjectModel
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Linq
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Runtime.Serialization.Formatters
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Collections.Concurrent
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
Microsoft.Win32.SystemEvents
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Collections.NonGeneric
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Configuration.ConfigurationManager
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Runtime.InteropServices.RuntimeInformation
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Private.Uri
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Security.Cryptography.Algorithms
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Security.Cryptography.Primitives
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Xml.ReaderWriter
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Private.Xml
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Text.RegularExpressions
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Net.WebClient
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Text.Encoding.Extensions
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Xml.XmlSerializer
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
Microsoft.Win32.Registry
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Runtime.Loader
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Diagnostics.StackTrace
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Reflection.Metadata
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------
System.Collections.Immutable
    Assembly Version: 6.0.0.0
    Win32 Version: n/a
    CodeBase: 
----------------------------------------

************** JIT Debugging **************

[SamuriHL]

Do you have MakeMKV installed?

[rupelja]

Thanks for the info and the app.

Need help with the error message received. Drive is still good.
Perhaps I missed something in the forum posts.

Thanks for any assistance!

Everything looked good, but I encountered an error message:

Flash error - 8-3-2023.PNG (45.37 KiB) Viewed 12295 times

MK-drive-info.png (34.82 KiB) Viewed 12295 times

[Billycar11]

Thanks for the info and the app.

Need help with the error message received. Drive is still good.
Perhaps I missed something in the forum posts.

Thanks for any assistance!

Everything looked good, but I encountered an error message:
Flash error - 8-3-2023.PNG
MK-drive-info.png

Follow the guide recommend fw

[rupelja]

Thanks for the info and the app.

Need help with the error message received. Drive is still good.
Perhaps I missed something in the forum posts.

Thanks for any assistance!

Everything looked good, but I encountered an error message:
Flash error - 8-3-2023.PNG
MK-drive-info.png

Follow the guide recommend fw

Would that recommendation be referring to the encrypted process or loading a MK firmware version.
If it is the MK firmware version, could you specify which one to use?

Thanks for your help.

[MartyMcNuts]

Thanks for the info and the app.

Need help with the error message received. Drive is still good.
Perhaps I missed something in the forum posts.

Thanks for any assistance!

Everything looked good, but I encountered an error message:
Flash error - 8-3-2023.PNG
MK-drive-info.png

Follow the guide recommend fw

Would that recommendation be referring to the encrypted process or loading a MK firmware version.
If it is the MK firmware version, could you specify which one to use?

Thanks for your help.

Both. Your issue is you are trying to flash directly from an encrypted firmware to WH16NS40 1.02 which can't be done. As per the guide, any desktop drive with encrypted firmware should be flashed to WH16NS60 1.02-MK first (which removes encryption and re-enables firmware downgrading). Then if you don't want to use the NS60 1.02-MK firmware, you can flash to something else.

[eksine]

Thanks so much marty mcnuts for making this tool, it worked great. Just confirming I was using asus bw-16dht inside a vantec nexstar DX2 (this is the newer one with 3amp power supply, not the older DX 2A supply) plugged into my front header usb 3.2 gen 1 (5gbps) on my B550 AORUS ELITE AX V2 (rev. 1.1)mobo. made a dump of the original firmware 3.10 and flashed the MK 3.10 firmware, MKV recognizes the microcode reenabled so I'm off to leearn how to rip and reencode! I don't even know why I'm doing this, I make $8,000/ month driving trucks, I could buy like every bluray and dvd ever made, plus 9anime has all the cartoons I usually watch anyways.

[Mr_Orange]

Thanks so much marty mcnuts for making this tool, it worked great. Just confirming I was using asus bw-16dht inside a vantec nexstar DX2 (this is the newer one with 3amp power supply, not the older DX 2A supply) plugged into my front header usb 3.2 gen 1 (5gbps) on my B550 AORUS ELITE AX V2 (rev. 1.1)mobo. made a dump of the original firmware 3.10 and flashed the MK 3.10 firmware, MKV recognizes the microcode reenabled so I'm off to leearn how to rip and reencode! I don't even know why I'm doing this, I make $8,000/ month driving trucks, I could buy like every bluray and dvd ever made, plus 9anime has all the cartoons I usually watch anyways.

Rip, yes, but why reencode?

I think you'll find that MakeMKV needs a disc from which to rip something...... this pretty much implies that you need to buy the disc first.

[mike23]

Greetings all!
I thought this would be a snap but doing something wrong ^_^

When trying to dump firmware, the file dumps as a .tar file, if I extract the tar file should I select one of the following .bin files to recover? Attempting the recovery method.

Issue of course is getting the No disc inserted error.

[Billycar11]

Greetings all!
I thought this would be a snap but doing something wrong ^_^

When trying to dump firmware, the file dumps as a .tar file, if I extract the tar file should I select one of the following .bin files to recover? Attempting the recovery method.

Issue of course is getting the No disc inserted error.

You didn't read the guide
Needs to be 2016+
You can recover select recover and follow the prompts and then flash your old fw not the backup the backup is useless pretty much