LG WH16NS40 SVC NS40 NOVEMBER 2014

Forum for discussions about UHD-capable dives
Post Reply
Message
Author
Matt1973
Posts: 2
Joined: Wed May 18, 2022 2:47 pm

LG WH16NS40 SVC NS40 NOVEMBER 2014

#1 Post by Matt1973 » Wed May 18, 2022 2:55 pm

Original version was 1.00. Got upgraded to 1.05. Everything I'm reading so far says that the tools available only work on 2015 or later.

Asking for an authoritative answer: is this drive completely screwed from being able to downgrade to 1.02? I did try the conventional way (download the driver from LG and try to flash. Obviously that doesn't work).

So is this one too old for any of the solutions presented by MakeMKV? Does anyone know of another way to skin this cat?

Billycar11
Posts: 4354
Joined: Sun Aug 24, 2014 5:49 am

Re: LG WH16NS40 SVC NS40 NOVEMBER 2014

#2 Post by Billycar11 » Wed May 18, 2022 3:37 pm

Dos flash is the only way now see recovery section in guide.
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com

Matt1973
Posts: 2
Joined: Wed May 18, 2022 2:47 pm

Re: LG WH16NS40 SVC NS40 NOVEMBER 2014

#3 Post by Matt1973 » Wed May 18, 2022 5:32 pm

Billycar11 wrote:
Wed May 18, 2022 3:37 pm
Dos flash is the only way now see recovery section in guide.
Thank you very kindly for your reply. I attempted as much and met with a brick wall. It's OK, though. The drive I have is an older one (November 2014), so I shouldn't have expected it to work, but it was worth the effort.

Again, thank you.

MartyMcNuts
Posts: 2884
Joined: Wed Nov 22, 2017 11:45 pm

Re: LG WH16NS40 SVC NS40 NOVEMBER 2014

#4 Post by MartyMcNuts » Wed May 18, 2022 11:43 pm

Matt1973 wrote:
Wed May 18, 2022 5:32 pm
Billycar11 wrote:
Wed May 18, 2022 3:37 pm
Dos flash is the only way now see recovery section in guide.
Thank you very kindly for your reply. I attempted as much and met with a brick wall. It's OK, though. The drive I have is an older one (November 2014), so I shouldn't have expected it to work, but it was worth the effort.

Again, thank you.
Flashing it wasn't worth the effort at all... Researching if it is UHD capable before flashing is worth the effort!!
Cheers :D
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG + Others) & DIY Single Drive Flasher (WW): https://uhdenableddrives.com

Post Reply