SDFtool Flasher

[compulov]

Not sure if anyone had tried this yet, but I just wanted to mention it works fine in Windows 11... the *ARM* release of Windows 11, running in a virtual machine on an M1 Mac. I gave it a go because I didn't feel like digging up my Windows laptop. The only workaround I needed to implement was to change the HighDPI scaling method, otherwise the app window was all messed up.

[MartyMcNuts]

Not sure if anyone had tried this yet, but I just wanted to mention it works fine in Windows 11... the *ARM* release of Windows 11, running in a virtual machine on an M1 Mac. I gave it a go because I didn't feel like digging up my Windows laptop. The only workaround I needed to implement was to change the HighDPI scaling method, otherwise the app window was all messed up.

Good to know!

[MartyMcNuts]

I have been advised that Buffalo BN13 is an encrypted firmware, so this has been added to the encrypted firmware list. SDFtool Flasher has been updated to v1.2.3 to include this firmware. Download link has been updated in the original post of this thread.

[zeeegerman]

Marty, brilliant work here! If we were in person, I'd "bro hug" you.

The flasher tool worked like a charm. No brainer. WH16NS60 w/Vantec enclosure, flashed in about 30 seconds. Fired up MakeMKV, now Ripping Ford Vs. Ferrari.

Golf clap, air Five, etc...Thanks a lot!

Let me know if you're taking donations for your efforts (seriously).

Cheers

zeeegerman

[MartyMcNuts]

Hi zeeegerman,

Glad you are all sorted. Enjoy ripping your movie collection!!

[mm8718]

@MartyMcNuts

I need some help

I am getting pretty consistent failed rips with my hardware but not always.

In the last week i just tried ripping Jungle cruise UHD and THOR Dark World UHD and they are both failing. I tried MakeMKV and DVD Fab UHD Rip with the same issues. Contrary to that an older UHD copy of Se7en worked fine.

DVD Fab has a tool to adjust the firmware and it seems to suggest the 1.02 is needed whereas i have 1.05 which works some times!

Can someone help? I would rather not pay the extortionate fee for DVD fab Drive tool!

Here's my drive details:

Drive Information
OS device name: \Device\CdRom0
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BH16NS40
Revision: 1.05
Serial number: KL7KAT81109
Firmware date: 2120-05-06 13:31
Bus encryption flags: 17
Highest AACS version: 76

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.05
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

No disc inserted

And here is what the SDF write sees:

SDF Drive Details

SDF Write.PNG (10.48 KiB) Viewed 12451 times

[Coopervid]

Look on page 1 of this thread and download the DE firmware pack. It contains 1.02.

viewtopic.php?f=16&t=22896

[revengineer]

2021-11-06.png (20.04 KiB) Viewed 12446 times

Marty,
the GUI is hosed on my 4k monitor. The text does not fully show and I am unable to move or resize the GUI.

Thank you for your software, it has served me well in the past.

Cheers.

[Coopervid]

Just reduce the resolution for the time being.

[MartyMcNuts]

2021-11-06.pngMarty,
the GUI is hosed on my 4k monitor. The text does not fully show and I am unable to move or resize the GUI.

Thank you for your software, it has served me well in the past.

Cheers.

Can you please try adjusting the DPI settings of the SDFtool flasher exe file as per below.

DPI Settings.jpg (100.58 KiB) Viewed 12421 times

Let me know if this helps.

[revengineer]

Can you please try adjusting the DPI settings of the SDFtool flasher exe file as per below.
Let me know if this helps.

I confirm that this works. Thank you so much!

[cloudyapple]

Have the below Archgon drive purchased from Amazon.
Loaded up the GUI flasher and the MK firmwares.

I heard this is the same as the LG BU40N, but there are many choices for this.
Which version should I choose?
Do I have an encrypted firmware currently and need to check some box?

Screenshot 2021-11-16 204110.png (16.84 KiB) Viewed 12252 times

Drive Information
OS device name: D:
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.01
Serial number: MO2L3VA5517
Firmware date: 2119-10-16 10:32
Bus encryption flags: 1F
Highest AACS version: 61

LibreDrive Information
Status: Possible (with patched firmware)
Drive platform: MT1959
Harware support: Yes
Firmware support: No
Firmware type: Original (patched version available)
Firmware version: 1.01
DVD all regions: Possible (with patched firmware)
BD raw data read: Possible (with patched firmware)
BD raw metadata read: Possible (with patched firmware)
Unrestricted read speed: Possible (with patched firmware)

[MartyMcNuts]

Have the below Archgon drive purchased from Amazon.
Loaded up the GUI flasher and the MK firmwares.

I heard this is the same as the LG BU40N, but there are many choices for this.
Which version should I choose?
Do I have an encrypted firmware currently and need to check some box?

Screenshot 2021-11-16 204110.png

Drive Information
OS device name: D:
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.01
Serial number: MO2L3VA5517
Firmware date: 2119-10-16 10:32
Bus encryption flags: 1F
Highest AACS version: 61

LibreDrive Information
Status: Possible (with patched firmware)
Drive platform: MT1959
Harware support: Yes
Firmware support: No
Firmware type: Original (patched version available)
Firmware version: 1.01
DVD all regions: Possible (with patched firmware)
BD raw data read: Possible (with patched firmware)
BD raw metadata read: Possible (with patched firmware)
Unrestricted read speed: Possible (with patched firmware)

As you can see, the SDFtool Flasher tells you that the drive does not have encrypted firmware (the red X beside "Encrypted firmware"). Just flash DE_LG_BU40N_1.00 firmware and be done with it. Start ripping your UHD discs.

[cloudyapple]

Thanks a lot Marty, look like it is done!
What a great tool!

Drive Information
OS device name: \Device\CdRom0
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.00
Serial number: MO2L3VA5517
Firmware date: 2116-12-20 15:28
Bus encryption flags: 17
Highest AACS version: 61

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Original (unpatched)
Firmware version: 1.00
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes


It does however looks like VLC doesn't play a UHD disc.
Am I right it is meant to be a ripping drive, not really a directly playable drive, i.e. no way to directly play it correct?

screenshot_VLC error.png (9.97 KiB) Viewed 12220 times

[Mr_Orange]

The firmware enables ripping.

You can set up VLC integration from the Preferences in MakeMKV.