Doctor Sleep 4K rip failure

Please post here for issues related to UHD discs
Post Reply
geogan
Posts: 51
Joined: Sun Sep 16, 2012 5:43 pm

Doctor Sleep 4K rip failure

Post by geogan » Tue Apr 20, 2021 5:24 pm

All sorts of errors during first part of operation before you get to the choose file list. I had to cancel it.

Bought from Amazon UK

Has this disc worked for anyone using below drive?

Drive Information
OS device name: \Device\CdRom2
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.04
Serial number: XXXXXXX
Firmware date: 2120-05-06 11:42
Bus encryption flags: 17
Highest AACS version: 72

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.04
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

Disc Information
Label: DOCTOR SLEEP
Timestamp: 2019-12-16 19:31:23
Data capacity: 86.66 Gb
Disc type: BD-ROM UHD
Number of layers: 3
Bus encryption flags: 80

Billycar11
Posts: 4311
Joined: Sun Aug 24, 2014 5:49 am

Re: Doctor Sleep 4K rip failure

Post by Billycar11 » Tue Apr 20, 2021 7:53 pm

What are the errors
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com

geogan
Posts: 51
Joined: Sun Sep 16, 2012 5:43 pm

Re: Doctor Sleep 4K rip failure

Post by geogan » Wed Apr 21, 2021 12:56 pm

Strange - it worked today.

Not sure - only difference was I plugged directly into rear USB3.0 ports on motherboard, instead of the front USB3.0 ports I normally use for convenience (the cables on the external drive housing I use are way too short)

I did notice some instablity in use when it was in front hub - would say no disc one minute and then unplugging and plugging would make it recognise drive.

My housing has two cables actually - one for power and the other data I presume.

dcoke22
Posts: 3073
Joined: Wed Jul 22, 2020 11:25 pm

Re: Doctor Sleep 4K rip failure

Post by dcoke22 » Wed Apr 21, 2021 1:03 pm

geogan wrote:
Wed Apr 21, 2021 12:56 pm
My housing has two cables actually - one for power and the other data I presume.
They're both for power and one is also data. USB powered drives often need more power than a single USB cable can supply. Unpowered USB hubs are also a source of frustration for users.

geogan
Posts: 51
Joined: Sun Sep 16, 2012 5:43 pm

Re: Doctor Sleep 4K rip failure

Post by geogan » Wed Apr 21, 2021 1:22 pm

I was just trying to do a rip of Rogue One 4K there and everything was going well until about 5 minutes into it, when I heard the drive spin down and stop moving completely.

I checked MakeMKV and the read numbers were all sitting still and increasing.

About 5 minutes later while I was looking at it suddenly I got a blue screen freeze of entire Windows 10 PC - DPC_WATCHDOG_VIOLATION

geogan
Posts: 51
Joined: Sun Sep 16, 2012 5:43 pm

Re: Doctor Sleep 4K rip failure

Post by geogan » Wed Apr 21, 2021 1:41 pm

Analysing Windows memory dump file:

BASEBOARD_MANUFACTURER: ASUSTeK COMPUTER INC.

BASEBOARD_PRODUCT: ROG CROSSHAIR VIII HERO

BASEBOARD_VERSION: Rev X.0x

DUMP_TYPE: 1

BUGCHECK_P1: 1

BUGCHECK_P2: 1e00

BUGCHECK_P3: fffff8034bafb320

BUGCHECK_P4: 0

DPC_TIMEOUT_TYPE: DPC_QUEUE_EXECUTION_TIMEOUT_EXCEEDED

CPU_COUNT: 20

CPU_MHZ: d48

CPU_VENDOR: AuthenticAMD

CPU_FAMILY: 19

CPU_MODEL: 21

CPU_STEPPING: 0

DEFAULT_BUCKET_ID: CODE_CORRUPTION

BUGCHECK_STR: 0x133

PROCESS_NAME: makemkvcon64.e

geogan
Posts: 51
Joined: Sun Sep 16, 2012 5:43 pm

Re: Doctor Sleep 4K rip failure

Post by geogan » Sat May 01, 2021 10:52 pm

In case anyone is wondering, the disc ripped without errors the second time I tried. I have since learned that the external drive needs to be completely unpowered and disconnected from PC every day before trying to use it with MakeMKV otherwise it goes crazy and doesn't work at all.

Post Reply