Unable to rip "SpongeBob SquarePants: The Next 100 Episodes " boxset

[FMTC84]

I bought newer DVD boxset SpongeBob SquarePants: The Next 100 Episodes and I tired my usual first (DVD Decrypter) and that did not work so I tried to use MakeMKV to rip the discs (16 discs) it says something about BUP not matching something or other. It will go very slowly for a while and they slows to a crawl with a "Ripguard" message and eventually will fail with a read error!

What gives? Is there anyway to rip these discs?

My drive is an LG BP50NB10 flashed with Libredrive

Thanks

[FMTC84]

Okay I tried again using "Cellwalk" and it still failed and the error about the BUP was this

Calculated BUP offset for VTS #0 does not match one in IFO header.
Calculated BUP offset for VTS #1 does not match one in IFO header.
Calculated BUP offset for VTS #2 does not match one in IFO header.
Calculated BUP offset for VTS #3 does not match one in IFO header.
Calculated BUP offset for VTS #4 does not match one in IFO header.
Calculated BUP offset for VTS #5 does not match one in IFO header.
Calculated BUP offset for VTS #8 does not match one in IFO header.
Calculated BUP offset for VTS #9 does not match one in IFO header.
Calculated BUP offset for VTS #10 does not match one in IFO header.
Calculated BUP offset for VTS #12 does not match one in IFO header.
Calculated BUP offset for VTS #13 does not match one in IFO header.

Is there anyway to rip these discs?

[dcoke22]

You can try the different DVD opening modes.

[FMTC84]

You can try the different DVD opening modes.

I did that already

The final error message was as follows

Error 'Scsi error - HARDWARE ERROR:TIMEOUT ON LOGICAL UNIT' occurred while reading 'BD-RE HL-DT-ST BD-RE BP60NB10 1.02 K0FGA5D5838' at offset '0'
Backup failed

[Billycar11]

You can try the different DVD opening modes.

I did that already

The final error message was as follows

Error 'Scsi error - HARDWARE ERROR:TIMEOUT ON LOGICAL UNIT' occurred while reading 'BD-RE HL-DT-ST BD-RE BP60NB10 1.02 K0FGA5D5838' at offset '0'
Backup failed

Thats a power error use both USB plugs in the back of the motherboard or buy a high powered USB hub.

[FMTC84]

You can try the different DVD opening modes.

I did that already

The final error message was as follows

Error 'Scsi error - HARDWARE ERROR:TIMEOUT ON LOGICAL UNIT' occurred while reading 'BD-RE HL-DT-ST BD-RE BP60NB10 1.02 K0FGA5D5838' at offset '0'
Backup failed

Thats a power error use both USB plugs in the back of the motherboard or buy a high powered USB hub.

I was using the Dell WD15 dock with my Latitude 5590 with that LG drive

Anyway I forgot my HP Elitedesk 800 G4 had a DVD drive (LG GUD1N) that is powered VIA a header on the MB which in turn is powered by the PCs power supply.

I tried the backup and it still failed so I just did the MakeMKV route as I found out the MKV files where just an uncompressed container file and that worked!!

However I don't see why this worked though and the backup part failed?

I got all 16 discs ripped and I am currently using Handbrake to compress the files for my Xbox Series X

Problem solved

Thank You

[Billycar11]

I was using the Dell WD15 dock with my Latitude 5590 with that LG drive

Anyway I forgot my HP Elitedesk 800 G4 had a DVD drive (LG GUD1N) that is powered VIA a header on the MB which in turn is powered by the PCs power supply.

I tried the backup and it still failed so I just did the MakeMKV route as I found out the MKV files where just an uncompressed container file and that worked!!

However I don't see why this worked though and the backup part failed?

I got all 16 discs ripped and I am currently using Handbrake to compress the files for my Xbox Series X

Problem solved

Thank You

from my experience usually laptop dock usb ports are underpowered

[MisterFyre]

Okay I tried again using "Cellwalk" and it still failed and the error about the BUP was this

Calculated BUP offset for VTS #0 does not match one in IFO header.
Calculated BUP offset for VTS #1 does not match one in IFO header.
Calculated BUP offset for VTS #2 does not match one in IFO header.
Calculated BUP offset for VTS #3 does not match one in IFO header.
Calculated BUP offset for VTS #4 does not match one in IFO header.
Calculated BUP offset for VTS #5 does not match one in IFO header.
Calculated BUP offset for VTS #8 does not match one in IFO header.
Calculated BUP offset for VTS #9 does not match one in IFO header.
Calculated BUP offset for VTS #10 does not match one in IFO header.
Calculated BUP offset for VTS #12 does not match one in IFO header.
Calculated BUP offset for VTS #13 does not match one in IFO header.

Is there anyway to rip these discs?

I've been having the same issue. I have no clue what to do.