MakeMKV will not open a DVD disc
Posted: Sat Jun 17, 2023 3:48 pm
Hi
MakeMKV is having a problem opening one of my DVDs. I have been successful copying Bluray discs and other DVD's without issue, however, when a one specific DVD is used I get the following log entries:
Using direct disc access mode
Calculated BUP offset for VTS #0 does not match one in IFO header.
DEBUG: Code 0 at 50U$77%wM?@GV?:29400071
IFO file for VTS #0 is corrupt, VOB file must be scanned. This may take very long time, please be patient.
DEBUG: Code 0 at 50U$77%wM?@GV?:29400071
DEBUG: Code 0 at &8F3QDY>4ar=Q&&_3:121262854
Failed to open disc
If I check 'Open DVD manually' I get an identical log entry yet the DVD itself will play on the same computer using VLC Media Player and in my separate Bluray player without problems. I have also changed the DVD opening modes from AUTO with no affect.
Can anyone shed any light on this? Is this just a bad disc?
Any help is much appreciated.
Thanks
IanMck
===================================
makeMKV v1.17.4 (win(x64 release))
===================================
OS device name: \Device\CdRom0
Current profile: DVD-ROM
Manufacturer: ASUS
Product: BW-16D1HT
Revision: 3.10
Serial number:
Firmware date: 2119-01-04 10:14
Bus encryption flags: 1F
LibreDrive Information
Status: Possible (with patched firmware)
Drive platform: MT1959
Harware support: Yes
Firmware support: No
Firmware type: Original (patched version available)
Firmware version: 3.10
DVD all regions: Possible (with patched firmware)
BD raw data read: Possible (with patched firmware)
BD raw metadata read: Possible (with patched firmware)
Unrestricted read speed: Possible (with patched firmware)
Disc Information
Label: THE_LOVE_PUNCH
Timestamp: 2014-07-23 01:10:22
Protection: CSS/CPPM
Data capacity: 6.50 Gb
Disc type: DVD-ROM
Disc size: 120mm
Maximum read rate: 10.08 Mbps [1x]
Number of layers: 2 (OTP)
===================================
MakeMKV is having a problem opening one of my DVDs. I have been successful copying Bluray discs and other DVD's without issue, however, when a one specific DVD is used I get the following log entries:
Using direct disc access mode
Calculated BUP offset for VTS #0 does not match one in IFO header.
DEBUG: Code 0 at 50U$77%wM?@GV?:29400071
IFO file for VTS #0 is corrupt, VOB file must be scanned. This may take very long time, please be patient.
DEBUG: Code 0 at 50U$77%wM?@GV?:29400071
DEBUG: Code 0 at &8F3QDY>4ar=Q&&_3:121262854
Failed to open disc
If I check 'Open DVD manually' I get an identical log entry yet the DVD itself will play on the same computer using VLC Media Player and in my separate Bluray player without problems. I have also changed the DVD opening modes from AUTO with no affect.
Can anyone shed any light on this? Is this just a bad disc?
Any help is much appreciated.
Thanks
IanMck
===================================
makeMKV v1.17.4 (win(x64 release))
===================================
OS device name: \Device\CdRom0
Current profile: DVD-ROM
Manufacturer: ASUS
Product: BW-16D1HT
Revision: 3.10
Serial number:
Firmware date: 2119-01-04 10:14
Bus encryption flags: 1F
LibreDrive Information
Status: Possible (with patched firmware)
Drive platform: MT1959
Harware support: Yes
Firmware support: No
Firmware type: Original (patched version available)
Firmware version: 3.10
DVD all regions: Possible (with patched firmware)
BD raw data read: Possible (with patched firmware)
BD raw metadata read: Possible (with patched firmware)
Unrestricted read speed: Possible (with patched firmware)
Disc Information
Label: THE_LOVE_PUNCH
Timestamp: 2014-07-23 01:10:22
Protection: CSS/CPPM
Data capacity: 6.50 Gb
Disc type: DVD-ROM
Disc size: 120mm
Maximum read rate: 10.08 Mbps [1x]
Number of layers: 2 (OTP)
===================================