Flashing firmware on a Mac for LibreDrive

[bachelorbob]

So the ASUS needs to be flashed to work on my iMac. All flashing firmware that can be found on the MakeMKV website is only suitable for Windows. I can't imagine I'm the only one with this problem? Is there no one who can explain to me how I can solve this problem?

Start reading from here:
viewtopic.php?f=19&t=21863&start=17

[ARMiller]

Thanks everyone!

I successfully flashed my ASUS drive with my Home Cinema PC. This wasn't entirely easy either, but I finally succeeded. After this I connected my ASUS to my iMac again and I am now ripping the first UHD

[oneirobot]

Hey all,

Thank you for the hard work everyone has put into compiling this thread and the countless others, specifically the Ultimate UHD Drives Flashing Guide Updated 2024. I have a question that hopefully is an easy answer from someone who is more knowledgeable than I.

I purchased an LG BP50NB40 SVC: NB52 and am trying to get it to rip 4K discs. Since I have a Macbook (Pro 2023, in case it matters) I'm not able to use the nice GUI tool, so I'm trying to work it out in the terminal. I've been fairly successful to a point, getting as far as enabling LibreDrive as shown in MakeMKV (see image below post). I've ripped standard blue ray discs with no issues since I've messed around initially, so I'm thinking I didn't mess up too badly.

@Billycar11 summarized the sequence of firmware flashes that this particular drive (SVC NB52) needs in the following comment:viewtopic.php?p=122269&sid=c61a25d9ce2b ... 71#p122269

I'm stuck on the "BP50NB40-NB50-1.03MK with bootloader/full flash" step. It is hopefully as simple as a different phrase in the terminal command, but I've read through a lot of these threads and if it's in there, I overlooked it.

Can anyone here potentially help me out? I can provide further info as needed, just let me know.

MakeMKV drive properties:
https://imgur.com/ACpAGAb

[MKV Maker]

I purchased an LG BP50NB40 SVC: NB52 and am trying to get it to rip 4K discs. Since I have a Macbook (Pro 2023, in case it matters) I'm not able to use the nice GUI tool, so I'm trying to work it out in the terminal. I've been fairly successful to a point, getting as far as enabling LibreDrive as shown in MakeMKV (see image below post). I've ripped standard blue ray discs with no issues since I've messed around initially, so I'm thinking I didn't mess up too badly.

I'm stuck on the "BP50NB40-NB50-1.03MK with bootloader/full flash" step. It is hopefully as simple as a different phrase in the terminal command, but I've read through a lot of these threads and if it's in there, I overlooked it.

I use Macs exclusively and in this case Terminal to flash my LG drives used no longer and for sale actually. You likely read my post earlier i this thread. I explain the console method clearly as possible. If you did not find it then I hope it helps when you read it.

[dcoke22]

I'm stuck on the "BP50NB40-NB50-1.03MK with bootloader/full flash" step. It is hopefully as simple as a different phrase in the terminal command, but I've read through a lot of these threads and if it's in there, I overlooked it.

If you look at the Ultimate UHD Drives Flashing Guide, in the section titled "Recommended Firmware to flash for MakeMKV:" down at the bottom you'll see:

if using command line add "full" after rawflash

If you scroll back to this post in this thread and look at the help output of the sdftool command on a specific drive, you can see a mention of the 'full' flag (reproduced here):

Code: Select all

MTK19xx firmware module v1.30

Commands:

  dump [auto|full|user]
  Dumps firmware image
    dump full      - dumps full rom image (if not disabled in firmware)
    dump user      - dumps non-volatile user data
    dump auto      - dumps full image if possible, user data otherwise

  rawflash [<flag>,<flag=value>,...]
    Sends the image and flashing flags to drive
    for flashing in self-update mode
  flags:
    main           - flashes main firmware (this is the default)
    full           - flashes boot loader and main firmware (Caution!!!)
    de             - sets DE byte in image
    enc            - encrypts firmware before sending to drive
    slim           - force USB slim drive handshake

So far, you've probably used the 'rawflash' command with either the 'main' or the 'enc' flag. To do the full boot loader flash, you have to use the 'full' flag with the rawflash command.

As with all firmware flashing, go slow and be sure before you do a command.

[oneirobot]

Thank you both! I did slow down a bit and went back and saw the debug commands in the previous comments. I am happy to say I'm up and running and have now ripped a 4K BD with no issues! Appreciate the patience and assistance!

I'm stuck on the "BP50NB40-NB50-1.03MK with bootloader/full flash" step. It is hopefully as simple as a different phrase in the terminal command, but I've read through a lot of these threads and if it's in there, I overlooked it.

If you look at the Ultimate UHD Drives Flashing Guide, in the section titled "Recommended Firmware to flash for MakeMKV:" down at the bottom you'll see:

if using command line add "full" after rawflash

If you scroll back to this post in this thread and look at the help output of the sdftool command on a specific drive, you can see a mention of the 'full' flag (reproduced here):

Code: Select all

MTK19xx firmware module v1.30

Commands:

  dump [auto|full|user]
  Dumps firmware image
    dump full      - dumps full rom image (if not disabled in firmware)
    dump user      - dumps non-volatile user data
    dump auto      - dumps full image if possible, user data otherwise

  rawflash [<flag>,<flag=value>,...]
    Sends the image and flashing flags to drive
    for flashing in self-update mode
  flags:
    main           - flashes main firmware (this is the default)
    full           - flashes boot loader and main firmware (Caution!!!)
    de             - sets DE byte in image
    enc            - encrypts firmware before sending to drive
    slim           - force USB slim drive handshake

So far, you've probably used the 'rawflash' command with either the 'main' or the 'enc' flag. To do the full boot loader flash, you have to use the 'full' flag with the rawflash command.

As with all firmware flashing, go slow and be sure before you do a command.

I purchased an LG BP50NB40 SVC: NB52 and am trying to get it to rip 4K discs. Since I have a Macbook (Pro 2023, in case it matters) I'm not able to use the nice GUI tool, so I'm trying to work it out in the terminal. I've been fairly successful to a point, getting as far as enabling LibreDrive as shown in MakeMKV (see image below post). I've ripped standard blue ray discs with no issues since I've messed around initially, so I'm thinking I didn't mess up too badly.

I'm stuck on the "BP50NB40-NB50-1.03MK with bootloader/full flash" step. It is hopefully as simple as a different phrase in the terminal command, but I've read through a lot of these threads and if it's in there, I overlooked it.

I use Macs exclusively and in this case Terminal to flash my LG drives used no longer and for sale actually. You likely read my post earlier i this thread. I explain the console method clearly as possible. If you did not find it then I hope it helps when you read it.

[cincyguy]

Hi all. I just purchased a Verbatim 43888 with the following showing up in MakeMKV:
Drive Information
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.05
Serial number: MOFOAME3340
Firmware date: 2124-04-23 13:47
Bus encryption flags: 17
Highest AACS version: 81

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959

I have tried all the steps mentioned in this thread and I keep getting the following error: Drive "/IOBDServices/D5D25996" not found

Has anyone else had this problem? Apologies if this has already been handled it's my first time trying to flash a drive on Mac and I am finding it relatively difficult.

[dcoke22]

Hi all. I just purchased a Verbatim 43888 with the following showing up in MakeMKV:
Drive Information
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.05
Serial number: MOFOAME3340
Firmware date: 2124-04-23 13:47
Bus encryption flags: 17
Highest AACS version: 81

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959

I have tried all the steps mentioned in this thread and I keep getting the following error: Drive "/IOBDServices/D5D25996" not found

Has anyone else had this problem? Apologies if this has already been handled it's my first time trying to flash a drive on Mac and I am finding it relatively difficult.

What is the output from running step 6? When you run the command:

Code: Select all

./makemkvcon f -l

you'll get the ID of your optical drive on your system. You then substitute this value into the command in Step 7.

[fettesb]

Hi, I also purchased a Verbatim 43888. MakeMKV showed me the following...

Laufwerksinformation
OS-Gerätename: /dev/rdisk4
Aktuelles Profil: BD-ROM
Produzent: HL-DT-ST
Produkt: BD-RE BU40N
Revision: 1.05
Serienummer: MO7P2DE4959
Firmware-Datum: 2124-04-23 13:47
Markierungen der Bus-Verschlüsselung: 17
Highest AACS version: 81

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959

Code: Select all

./makemkvcon f -l

Found 1 drives(s)
00: /IOBDServices/18BCE9FC
HL-DT-ST_BD-RE_BU40N_1.05_212404231347_MO7P2DE4959

Code: Select all

./makemkvcon f -d '/IOBDServices/18BCE9FC' -f /private/tmp/sdf.bin rawflash full -i /private/tmp/HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin

Reading input file /private/tmp/HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin
Flashing flags = 0x1 : 0 0 0 1 : ---- ---- ---- BOOT
Current Drive ID: HL-DT-ST_BD-RE_BU40N_1.05_212404231347_MO7P2DE4959
Ready to write drive flash memory.
Type "yes" to continue, "no" to abort
yes
Operation started: Sending flash image to drive
100% Operation finished
Operation started: Programming flash
100% Operation finished
Done successfully


when i open MakeMKV the Status is the same (Status: Possible, not yet enabled) and the revision is still 1.05

Please help

[dcoke22]

Hi, I also purchased a Verbatim 43888. MakeMKV showed me the following...

Laufwerksinformation
OS-Gerätename: /dev/rdisk4
Aktuelles Profil: BD-ROM
Produzent: HL-DT-ST
Produkt: BD-RE BU40N
Revision: 1.05
Serienummer: MO7P2DE4959
Firmware-Datum: 2124-04-23 13:47
Markierungen der Bus-Verschlüsselung: 17
Highest AACS version: 81

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959

Code: Select all

./makemkvcon f -l

Found 1 drives(s)
00: /IOBDServices/18BCE9FC
HL-DT-ST_BD-RE_BU40N_1.05_212404231347_MO7P2DE4959

Code: Select all

./makemkvcon f -d '/IOBDServices/18BCE9FC' -f /private/tmp/sdf.bin rawflash full -i /private/tmp/HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin

Reading input file /private/tmp/HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin
Flashing flags = 0x1 : 0 0 0 1 : ---- ---- ---- BOOT
Current Drive ID: HL-DT-ST_BD-RE_BU40N_1.05_212404231347_MO7P2DE4959
Ready to write drive flash memory.
Type "yes" to continue, "no" to abort
yes
Operation started: Sending flash image to drive
100% Operation finished
Operation started: Programming flash
100% Operation finished
Done successfully


when i open MakeMKV the Status is the same (Status: Possible, not yet enabled) and the revision is still 1.05

Please help

I'm pretty sure the 1.05 firmware on your BU40N is encrypted… so you need to change 'rawflash full' to 'rawflash enc'.