Pioneer firmware update February 2023

Discussion of LibreDrive mode, compatible drives and firmwares
gerard143
Posts: 34
Joined: Sat Mar 26, 2022 2:54 am

Re: Pioneer firmware update February 2023

Post by gerard143 »

I wound up just ordering new drives. Ordered 4. All had 1.03 on it. Using two and I will keep the other two on hand as spares in case either of these ever fail.
Konten
Posts: 44
Joined: Sun Aug 21, 2022 8:30 am

Re: Pioneer firmware update February 2023

Post by Konten »

Coopervid wrote:
Thu Mar 16, 2023 10:59 pm
Wait for Mike's response.
Will do! :wink:
mike admin
Posts: 4065
Joined: Wed Nov 26, 2008 2:26 am
Contact:

Re: Pioneer firmware update February 2023

Post by mike admin »

Coopervid wrote:
Thu Mar 16, 2023 4:41 pm
Good to hear Mike. Will the downgrade functionality be part of Makemkv or is the separate utility needed?
Most likely both - it will be part of sdftool and also available as a separate utility.
Dazza1980
Posts: 5
Joined: Wed Mar 22, 2023 10:17 am

Re: Pioneer firmware update February 2023

Post by Dazza1980 »

Hi all I'm new to the drive flashing could anyone tell what program is used in Windows to modify the binary file in the pioneer updater.exe please

Regards Darren.
computerlove
Posts: 6
Joined: Fri Mar 31, 2023 2:14 pm

Re: Pioneer firmware update February 2023

Post by computerlove »

pendell wrote:
Sun Mar 05, 2023 6:22 pm
Haha, unwittingly updated my brand new S13U-X to 1.04 before seeing this announcement, had to send it back in and get a replacement that was luckily still on 1.03. Will NOT be touching the firmware from now on lmao.
Unluckily, I have also flashed my BDR-S13J-X with 1.04 firmware before reading this thread. Any possibility to downgrade it to which support LibreDrive?
TeddyRaspin
Posts: 200
Joined: Thu Dec 28, 2017 1:41 pm

Re: Pioneer firmware update February 2023

Post by TeddyRaspin »

You have to wait few weeks.
computerlove
Posts: 6
Joined: Fri Mar 31, 2023 2:14 pm

Re: Pioneer firmware update February 2023

Post by computerlove »

Hope that it will be available soon.
computerlove
Posts: 6
Joined: Fri Mar 31, 2023 2:14 pm

Re: Pioneer firmware update February 2023

Post by computerlove »

mike admin wrote:
Thu Mar 16, 2023 4:06 pm
Some status update. Unfortunately, this is taking much longer than expected. One think to note is that downgrade is possible on any version of firmware, and at the very least you would be able to downgrade, even a new drive that came with locked firmware.
Waiting for your update on how to downgrade firmware of my Pioneer BDR-S13J-X from 1.04 to 1.03 owing to my oversight of the warning post on this forum.
TiKiMaN1
Posts: 5
Joined: Sat Apr 08, 2023 3:39 pm

Re: Pioneer firmware update February 2023

Post by TiKiMaN1 »

I have a Pioneer BDR-212UBK and it was working awesome for ripping my UHD discs for almost a year. Unfortunately, just recently I stumbled into an issue with a couple of discs so I decided to "upgrade" :shock: to firmware 1.04 and like this forum is discussing it disabled the ability to rip UHD. Really looking forward to any type of solution. I'm grateful that my drive still rips DVD and Blu-ray, but I can't wait to have the ability to rip UHD to be restored to my drive. Thanks to everyone that is working on this, and I hope that a fix will be created soon.
nokia768701
Posts: 4
Joined: Thu Feb 01, 2018 1:19 pm

Re: Pioneer firmware update February 2023

Post by nokia768701 »

TiKiMaN1 wrote:
Sat Apr 08, 2023 3:50 pm
I have a Pioneer BDR-212UBK and it was working awesome for ripping my UHD discs for almost a year. Unfortunately, just recently I stumbled into an issue with a couple of discs so I decided to "upgrade" :shock: to firmware 1.04 and like this forum is discussing it disabled the ability to rip UHD. Really looking forward to any type of solution. I'm grateful that my drive still rips DVD and Blu-ray, but I can't wait to have the ability to rip UHD to be restored to my drive. Thanks to everyone that is working on this, and I hope that a fix will be created soon.
in 12 serials, it appears that all newly-released Pioneer firmwares contain updated kernel with downgrade protection.
the developers of MakeMKV are working on the support of fw1.04.
please wait till new sdf release.
ralphieg
Posts: 1
Joined: Wed Apr 12, 2023 9:36 pm

Re: Pioneer firmware update February 2023

Post by ralphieg »

Hi! Sorry, but I am new to this party. I made the mistake and updated the Firmware of my BDR-XD07TUHD to the latest 1.05 and now lost LibreDrive thus unable to rip 4K BluRays. I still have a 1.03 firmware (the Windows executable) laying around and i tried changing the two appearances of "1.03' with "1.06" in a Hex Editor. But when I try to execute it, there is an Error thus it does not flash the old firm ware. What exactly has to be done (changed) in order to downgrade the firmware? Is there an alternative flashing tool that i could use?
Billycar11
Posts: 3766
Joined: Sun Aug 24, 2014 5:49 am

Re: Pioneer firmware update February 2023

Post by Billycar11 »

ralphieg wrote:
Thu Apr 13, 2023 7:16 am
Hi! Sorry, but I am new to this party. I made the mistake and updated the Firmware of my BDR-XD07TUHD to the latest 1.05 and now lost LibreDrive thus unable to rip 4K BluRays. I still have a 1.03 firmware (the Windows executable) laying around and i tried changing the two appearances of "1.03' with "1.06" in a Hex Editor. But when I try to execute it, there is an Error thus it does not flash the old firm ware. What exactly has to be done (changed) in order to downgrade the firmware? Is there an alternative flashing tool that i could use?
no not available yet but its being worked on
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
computerlove
Posts: 6
Joined: Fri Mar 31, 2023 2:14 pm

Re: Pioneer firmware update February 2023

Post by computerlove »

computerlove wrote:
Sat Apr 08, 2023 2:15 pm
mike admin wrote:
Thu Mar 16, 2023 4:06 pm
Some status update. Unfortunately, this is taking much longer than expected. One think to note is that downgrade is possible on any version of firmware, and at the very least you would be able to downgrade, even a new drive that came with locked firmware.
Waiting for your update on how to downgrade firmware of my Pioneer BDR-S13J-X from 1.04 to 1.03 owing to my oversight of the warning post on this forum.
I have my Pioneer BDR-S13J-X firmware upgrade to 1.04 but have download firmware 1.03 elsewhere from internet. Can anybody advise whether it is possible for me to downgrade my drive firmware back to 1.03? Thanks!
Billycar11
Posts: 3766
Joined: Sun Aug 24, 2014 5:49 am

Re: Pioneer firmware update February 2023

Post by Billycar11 »

computerlove wrote:
Sat Apr 15, 2023 3:35 am

I have my Pioneer BDR-S13J-X firmware upgrade to 1.04 but have download firmware 1.03 elsewhere from internet. Can anybody advise whether it is possible for me to downgrade my drive firmware back to 1.03? Thanks!
no not yet
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
outlier
Posts: 8
Joined: Thu Mar 16, 2023 4:34 am

Re: Pioneer firmware update February 2023

Post by outlier »

outlier wrote:
Thu Mar 16, 2023 7:39 am
The BDR-X13U-S from Amazon seems to already be shipping with the latest 1.03 firmware (though I'm not entirely certain it was a virgin unit--the cables weren't bound with a wire and the plastic cover for the electric plug wasn't actually on the plug).
For anyone scared off Amazon's BDR-X13U-S because of my earlier post, I can confirm it was a return. I ordered another last week (after returning the 1st because it was used -- all the rubber feet were already installed and the protective plastic cover on the front was missing), and got a unit manufactured in Nov 2022 (vs. Oct 2022) with firmware 1.01.

I suppose I can update the unit to 1.02 but a bit too afraid to do that at this point.
Post Reply