Cant make my new BU40N to rip

Discussion of LibreDrive mode, compatible drives and firmwares
Post Reply
Jeppe
Posts: 4
Joined: Fri Jan 08, 2021 10:39 pm

Cant make my new BU40N to rip

Post by Jeppe »

I bought this LG BU40N Slim Drive + Vantec Enclosure from one of the recommended sellers in the forum. It should be plug and play ready.

However I get this error report when I try to backup an UHD disc as you can see in the attachment.

I also get an error when trying to backup a normal bluray disc.

Any thoughts on this will be highly appreciated.
MKV.PNG
MKV.PNG (68.16 KiB) Viewed 14904 times
MakeMKV1.PNG
MakeMKV1.PNG (230.8 KiB) Viewed 14904 times
Billycar11
Posts: 3766
Joined: Sun Aug 24, 2014 5:49 am

Re: Cant make my new BU40N to rip

Post by Billycar11 »

Jeppe wrote:
Sat Jan 09, 2021 8:06 am
I bought this LG BU40N Slim Drive + Vantec Enclosure from one of the recommended sellers in the forum. It should be plug and play ready.

However I get this error report when I try to backup an UHD disc as you can see in the attachment.

I also get an error when trying to backup a normal bluray disc.

Any thoughts on this will be highly appreciated.
your second picture does not show it but im 99% sure up in top of the log it says hardware timeout on logical unit

drive needs more power use both plugs and or a high powered usb Hub like this: https://smile.amazon.com/gp/product/B00 ... UTF8&psc=1
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
jonghotti
Posts: 989
Joined: Tue May 01, 2018 7:04 pm
Location: San Francisco Bay Area
Contact:

Re: Cant make my new BU40N to rip

Post by jonghotti »

Billycar11 wrote:
Sat Jan 09, 2021 8:25 am
Jeppe wrote:
Sat Jan 09, 2021 8:06 am
I bought this LG BU40N Slim Drive + Vantec Enclosure from one of the recommended sellers in the forum. It should be plug and play ready.

However I get this error report when I try to backup an UHD disc as you can see in the attachment.

I also get an error when trying to backup a normal bluray disc.

Any thoughts on this will be highly appreciated.
your second picture does not show it but im 99% sure up in top of the log it says hardware timeout on logical unit

drive needs more power use both plugs and or a high powered usb Hub like this: https://smile.amazon.com/gp/product/B00 ... UTF8&psc=1
That's what that message means? How on Earth would a user know that?
The Original "UHD Friendly" Drive Seller
https://www.makemkv.com/forum/viewtopic ... 20&t=17829
Billycar11
Posts: 3766
Joined: Sun Aug 24, 2014 5:49 am

Re: Cant make my new BU40N to rip

Post by Billycar11 »

jonghotti wrote:
Sat Jan 09, 2021 9:03 am

That's what that message means? How on Earth would a user know that?
not always but for usb drives thats what it normal means in my experience.
because when drive does not have enough power it reboots and makemkv says its taking to long to respond.
it then boots back up and mkvmkv think LD is still loaded in the ram but its not because of reboot
and you get a bunch of illegal key exchange errors because of it.
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
Jeppe
Posts: 4
Joined: Fri Jan 08, 2021 10:39 pm

Re: Cant make my new BU40N to rip

Post by Jeppe »

Thank you very much Billy. It worked with both usbs plugged in.
jammer
Posts: 3
Joined: Wed Feb 10, 2021 11:30 pm

Re: Cant make my new BU40N to rip

Post by jammer »

jonghotti wrote:
Sat Jan 09, 2021 9:03 am
Billycar11 wrote:
Sat Jan 09, 2021 8:25 am
Jeppe wrote:
Sat Jan 09, 2021 8:06 am
I bought this LG BU40N Slim Drive + Vantec Enclosure from one of the recommended sellers in the forum. It should be plug and play ready.

However I get this error report when I try to backup an UHD disc as you can see in the attachment.

I also get an error when trying to backup a normal bluray disc.

Any thoughts on this will be highly appreciated.
your second picture does not show it but im 99% sure up in top of the log it says hardware timeout on logical unit

drive needs more power use both plugs and or a high powered usb Hub like this: https://smile.amazon.com/gp/product/B00 ... UTF8&psc=1
That's what that message means? How on Earth would a user know that?
Software can only do so much. As far as I know there is nothing in the USB spec that allows software to know how much power a device can draw from it's power source. All it can now is a device vanished from the USB chain.
jonghotti
Posts: 989
Joined: Tue May 01, 2018 7:04 pm
Location: San Francisco Bay Area
Contact:

Re: Cant make my new BU40N to rip

Post by jonghotti »

Out of curiosity, what spec would list those log messages?
The Original "UHD Friendly" Drive Seller
https://www.makemkv.com/forum/viewtopic ... 20&t=17829
spl147
Posts: 295
Joined: Mon Dec 10, 2012 4:59 pm

Re: Cant make my new BU40N to rip

Post by spl147 »

Just want to point out to the OP, your drive is NOT Libre Patched!
Billycar11
Posts: 3766
Joined: Sun Aug 24, 2014 5:49 am

Re: Cant make my new BU40N to rip

Post by Billycar11 »

spl147 wrote:
Sat Mar 20, 2021 2:02 pm
Just want to point out to the OP, your drive is NOT Libre Patched!
No it is stop talking about something you don't know about

You can see they say it works once they plugged in both cables
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
spl147
Posts: 295
Joined: Mon Dec 10, 2012 4:59 pm

Re: Cant make my new BU40N to rip

Post by spl147 »

Billycar11 wrote:
spl147 wrote:
Sat Mar 20, 2021 2:02 pm
Just want to point out to the OP, your drive is NOT Libre Patched!
No it is stop talking about something you don't know about

You can see they say it works once they plugged in both cables
Excuse me? Look at the first pic it clearly states unpatched.
d00zah
Posts: 1414
Joined: Mon Jun 06, 2016 8:23 pm

Re: Cant make my new BU40N to rip

Post by d00zah »

spl147 wrote:
Sat Mar 20, 2021 6:55 pm
Excuse me? Look at the first pic it clearly states unpatched.
It also clearly states "Status: Enabled" w/ the accompanying 4 - "Yes"s. No need to patch.
spl147
Posts: 295
Joined: Mon Dec 10, 2012 4:59 pm

Re: Cant make my new BU40N to rip

Post by spl147 »

d00zah wrote:
spl147 wrote:
Sat Mar 20, 2021 6:55 pm
Excuse me? Look at the first pic it clearly states unpatched.
It also clearly states "Status: Enabled" w/ the accompanying 4 - "Yes"s. No need to patch.
If you say so
d00zah
Posts: 1414
Joined: Mon Jun 06, 2016 8:23 pm

Re: Cant make my new BU40N to rip

Post by d00zah »

Unless I misread, Mike also says so. LibreDrive firmware status

See section "supported - original vendor firmware: 68 firmware(s):"

HL-DT-ST-BD-RE_BU40N-1.00-N003103-211612201528

But MakeMKV's word is usually good enough for me.
spl147
Posts: 295
Joined: Mon Dec 10, 2012 4:59 pm

Re: Cant make my new BU40N to rip

Post by spl147 »

d00zah wrote:
Sat Mar 20, 2021 9:14 pm
Unless I misread, Mike also says so. LibreDrive firmware status

See section "supported - original vendor firmware: 68 firmware(s):"

HL-DT-ST-BD-RE_BU40N-1.00-N003103-211612201528

But MakeMKV's word is usually good enough for me.
i guess if the OP wants to run really old firmware then sure, i prefer to use more current firmware as i find 1.02 way more stable for ripping
d00zah
Posts: 1414
Joined: Mon Jun 06, 2016 8:23 pm

Re: Cant make my new BU40N to rip

Post by d00zah »

Fair enough, but that's a different can of worms. W/out change logs, it's hard to tell if a new F/W does more than just implement a new 'unfriendly' measure, or actually improves anything. I prefer to know before recommending out of hand. YMMV People seem a tad "flash-happy" these days. IMO Pax
Post Reply