WH16NS40 Flasher

Discussion of LibreDrive mode, compatible drives and firmwares
Billycar11
Posts: 3745
Joined: Sun Aug 24, 2014 5:49 am

Re: WH16NS40 Flasher

Post by Billycar11 »

sorntor wrote:
Sat Dec 05, 2020 2:04 am

If thats a thread that will flash my ASUS back to a diff firmware to recover, great.
Link's fixed
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
sorntor
Posts: 15
Joined: Sat Dec 05, 2020 1:46 am

Re: WH16NS40 Flasher

Post by sorntor »

Billycar11 wrote:
Sat Dec 05, 2020 2:25 am
sorntor wrote:
Sat Dec 05, 2020 2:04 am

If thats a thread that will flash my ASUS back to a diff firmware to recover, great.
Link's fixed
Oh great, lots of tools there. Since I had flashed to asus 3.10 I used the ASUS ODD FW Changer and selected HL-DT-ST-BD-RE_WH16NS40-NS50-1.05-NM00900-212005061440.bin but still not responsive. Shows correct HW in device manager now though. So I figured lets try going back to a older fw and tried HL-DT-ST-BD-RE_WH16NS40-NS50-1.03-NM00600-211711211653.bin with the same result, just does nothing when putting in a cd.

in the SDFtool flasher thread there is a recovery fw DE_LG_WH16NS40_1.01.bin.zip (great!) but the sdftool flasher gives me a .net exception error on launch and doesn't allow me to select my drive. Edit - Just needed to install makemkv, it works now but doesn't seem to work better than any others.

When I select that recovery fw with the ASUS ODD FW Flasher that has worked with the other ones it gives an error and doesn't allow me to continue.

In this thread - https://www.makemkv.com/forum/viewtopic ... 16&t=18933

I grabbed "Below is the link to the modified ASUS FW Flasher + Downgrade Enabled Firmware + the latest MK firmware pack (20/07/2020):" and loaded up DE_LG_WH16NS40_1.02_NS50.bin and it successfully flashed....but still the same result. Drive ejects few blue blinking lights at close but otherwise non-responsive.

I thought for sure that last one would work because its the OFW but I guess not :(

btw the last OFW I flashed that worked was direct from LG - WH16NS40_1.02-A0(ew).zip

Any advice?

Thanks :)
Billycar11
Posts: 3745
Joined: Sun Aug 24, 2014 5:49 am

Re: WH16NS40 Flasher

Post by Billycar11 »

sorntor wrote:
Sat Dec 05, 2020 4:28 pm

Any advice?

Thanks :)
Possibly what is the build date on your drive sticker on top of drive
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
sorntor
Posts: 15
Joined: Sat Dec 05, 2020 1:46 am

Re: WH16NS40 Flasher

Post by sorntor »

Billycar11 wrote:
Sun Dec 06, 2020 12:18 am
sorntor wrote:
Sat Dec 05, 2020 4:28 pm

Any advice?

Thanks :)
Possibly what is the build date on your drive sticker on top of drive
Well damn, now I think I know the issue. June 2014 :/ The OFW told me "NS50" for status so I thought I was ok sigh.

https://imgur.com/a/wQezYQz

Any hope at recovery?
Coopervid
Posts: 1130
Joined: Tue Feb 19, 2019 10:32 pm

Re: WH16NS40 Flasher

Post by Coopervid »

This is unfortunate.

Billy. I also just updated my guides on Redfox ( English / German) . I thought that I had put out enough warnings. No. Maybe you can get some inspirations for your guide from mine that is strictly thought for users of AnyDVD.

https://forum.redfox.bz/threads/guide-f ... dvd.79023/
MartyMcNuts
Posts: 2434
Joined: Wed Nov 22, 2017 11:45 pm

Re: WH16NS40 Flasher

Post by MartyMcNuts »

sorntor wrote:
Sun Dec 06, 2020 5:52 pm
Billycar11 wrote:
Sun Dec 06, 2020 12:18 am
sorntor wrote:
Sat Dec 05, 2020 4:28 pm

Any advice?

Thanks :)
Possibly what is the build date on your drive sticker on top of drive
Well damn, now I think I know the issue. June 2014 :/ The OFW told me "NS50" for status so I thought I was ok sigh.

https://imgur.com/a/wQezYQz

Any hope at recovery?
SDFtool Flasher
Cheers :D
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG) & DIY Single Drive Flasher (WW): https://www.uhdenableddrives.com
sorntor
Posts: 15
Joined: Sat Dec 05, 2020 1:46 am

Re: WH16NS40 Flasher

Post by sorntor »

MartyMcNuts wrote:
Sun Dec 06, 2020 10:24 pm
sorntor wrote:
Sun Dec 06, 2020 5:52 pm
Billycar11 wrote:
Sun Dec 06, 2020 12:18 am


Possibly what is the build date on your drive sticker on top of drive
Well damn, now I think I know the issue. June 2014 :/ The OFW told me "NS50" for status so I thought I was ok sigh.

https://imgur.com/a/wQezYQz

Any hope at recovery?
SDFtool Flasher
If you look at my reply before the last you'll see that I did attempt to use this however perhaps I'm not using the correct recovery file? If you could let me know specifically which file to try I would appreciate it thank you
Billycar11
Posts: 3745
Joined: Sun Aug 24, 2014 5:49 am

Re: WH16NS40 Flasher

Post by Billycar11 »

Coopervid wrote:
Sun Dec 06, 2020 8:26 pm
This is unfortunate.

Billy. I also just updated my guides on Redfox ( English / German) . I thought that I had put out enough warnings. No. Maybe you can get some inspirations for your guide from mine that is strictly thought for users of AnyDVD.

https://forum.redfox.bz/threads/guide-f ... dvd.79023/
The problem is they did not even read my guide they used this knock off one
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
MartyMcNuts
Posts: 2434
Joined: Wed Nov 22, 2017 11:45 pm

Re: WH16NS40 Flasher

Post by MartyMcNuts »

sorntor wrote:
Sun Dec 06, 2020 10:31 pm
MartyMcNuts wrote:
Sun Dec 06, 2020 10:24 pm
sorntor wrote:
Sun Dec 06, 2020 5:52 pm


Well damn, now I think I know the issue. June 2014 :/ The OFW told me "NS50" for status so I thought I was ok sigh.

https://imgur.com/a/wQezYQz

Any hope at recovery?
SDFtool Flasher
If you look at my reply before the last you'll see that I did attempt to use this however perhaps I'm not using the correct recovery file? If you could let me know specifically which file to try I would appreciate it thank you
The instructions and recovery files are in the first post of the SDFtool Flasher thread.
Cheers :D
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG) & DIY Single Drive Flasher (WW): https://www.uhdenableddrives.com
sorntor
Posts: 15
Joined: Sat Dec 05, 2020 1:46 am

Re: WH16NS40 Flasher

Post by sorntor »

MartyMcNuts wrote:
Mon Dec 07, 2020 12:02 am
sorntor wrote:
Sun Dec 06, 2020 10:31 pm
MartyMcNuts wrote:
Sun Dec 06, 2020 10:24 pm


SDFtool Flasher
If you look at my reply before the last you'll see that I did attempt to use this however perhaps I'm not using the correct recovery file? If you could let me know specifically which file to try I would appreciate it thank you
The instructions and recovery files are in the first post of the SDFtool Flasher thread.
Yes, DE_LG_WH16NS40_1.01.bin.zip ?

I did this already. it did not work. Is this the file that should have recovered my 2014 WH16NS40 ? You are supposed to select recover drive, check enc, select DE_LG_WH16NS40_1.01.bin and write yes? If yes, that did not resolve.

I noticed that flashing with SDFTool is much faster than with the Asus ODD Flasher or the OFW flasher from LG. Is this normal?
d00zah
Posts: 1412
Joined: Mon Jun 06, 2016 8:23 pm

Re: WH16NS40 Flasher

Post by d00zah »

Usage:

Select a drive from the first drop down box.

Select either WRITE, READ or RECOVER option (write is default).

If you selected RECOVER:

A "file browser" will open so you can select the drive's current (wrong) firmware. This is so the boot ID can be obtained.

Click the second drop down box to select the correct firmware to flash. (DE_LG_WH16NS40_1.01.bin)

You can now press the START button to recover the drive and flashing the selected firmware to your drive. Once the firmware has been flashed successfully, the application will refresh the drive list shown in the drop down box.

NO NEED to check 'enc'.
sorntor
Posts: 15
Joined: Sat Dec 05, 2020 1:46 am

Re: WH16NS40 Flasher

Post by sorntor »

d00zah wrote:
Mon Dec 07, 2020 12:36 am
Usage:

Select a drive from the first drop down box.

Select either WRITE, READ or RECOVER option (write is default).

If you selected RECOVER:

A "file browser" will open so you can select the drive's current (wrong) firmware. This is so the boot ID can be obtained.

Click the second drop down box to select the correct firmware to flash. (DE_LG_WH16NS40_1.01.bin)

You can now press the START button to recover the drive and flashing the selected firmware to your drive. Once the firmware has been flashed successfully, the application will refresh the drive list shown in the drop down box.

NO NEED to check 'enc'.
" A "file browser" will open so you can select the drive's current (wrong) firmware. This is so the boot ID can be obtained"

This part confuses me. What file am I supposed to select at that part? I selected DE_LG_WH16NS40_1.02_NS50.bin as thats the last fw I flashed. Is that ok? After that choosing
the second dropdown to select DE_LG_WH16NS40_1.01.bin it produces the following error -

Command produced error code 0x8f052400

Setup pic - https://imgur.com/a/Fy5BZfZ

I *think* im following your instruction correctly I just don't know why its throwing that error.

For giggles I tried flashing HL-DT-ST-BD-RE_WH16NS40-NS50-1.05-NM00900-212005061440.bin with SDFTool and it did successfully flash it, the status changed from 1.02 to 1.05. So I did recover, selected HL-DT-ST-BD-RE_WH16NS40-NS50-1.05-NM00900-212005061440.bin, then 2nd dropdown selected DE_LG_WH16NS40_1.01.bin and it produced the same error as above 0x8f052400

Let me know what I should try and thank you :)
Billycar11
Posts: 3745
Joined: Sun Aug 24, 2014 5:49 am

Re: WH16NS40 Flasher

Post by Billycar11 »

Your still flashing the wrong firmware stop
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
sorntor
Posts: 15
Joined: Sat Dec 05, 2020 1:46 am

Re: WH16NS40 Flasher

Post by sorntor »

Billycar11 wrote:
Mon Dec 07, 2020 1:02 am
Your still flashing the wrong firmware stop
Can you just please tell me which recovery file I'm supposed to be using? There were only two in the SDF thread and one was for my model and the other was not.

Telling me I'm doing wrong without telling me which file to pick won't help me resolve it.

Thank you
MartyMcNuts
Posts: 2434
Joined: Wed Nov 22, 2017 11:45 pm

Re: WH16NS40 Flasher

Post by MartyMcNuts »

sorntor wrote:
Mon Dec 07, 2020 12:43 am
d00zah wrote:
Mon Dec 07, 2020 12:36 am
Usage:

Select a drive from the first drop down box.

Select either WRITE, READ or RECOVER option (write is default).

If you selected RECOVER:

A "file browser" will open so you can select the drive's current (wrong) firmware. This is so the boot ID can be obtained.

Click the second drop down box to select the correct firmware to flash. (DE_LG_WH16NS40_1.01.bin)

You can now press the START button to recover the drive and flashing the selected firmware to your drive. Once the firmware has been flashed successfully, the application will refresh the drive list shown in the drop down box.

NO NEED to check 'enc'.
" A "file browser" will open so you can select the drive's current (wrong) firmware. This is so the boot ID can be obtained"

This part confuses me. What file am I supposed to select at that part? I selected DE_LG_WH16NS40_1.02_NS50.bin as thats the last fw I flashed. Is that ok? After that choosing
the second dropdown to select DE_LG_WH16NS40_1.01.bin it produces the following error -

Command produced error code 0x8f052400

Setup pic - https://imgur.com/a/Fy5BZfZ

I *think* im following your instruction correctly I just don't know why its throwing that error.

For giggles I tried flashing HL-DT-ST-BD-RE_WH16NS40-NS50-1.05-NM00900-212005061440.bin with SDFTool and it did successfully flash it, the status changed from 1.02 to 1.05. So I did recover, selected HL-DT-ST-BD-RE_WH16NS40-NS50-1.05-NM00900-212005061440.bin, then 2nd dropdown selected DE_LG_WH16NS40_1.01.bin and it produced the same error as above 0x8f052400

Let me know what I should try and thank you :)
That should have worked for you. Can you try running app as administrator and trying again?

I've never had an old drive to test the recovery on. I've only had a desktop drive cross-flashed to slim drive firmware, so not exactly the same issue as yourself but the recovery method is supposed to be the same. See my example below...

Step 1: I have a BH16NS55 that has been accidently cross-flashed to slim drive BU40N firmware.
Recover-1.jpg
Recover-1.jpg (23.08 KiB) Viewed 19526 times

Step 2: I have selected the drive and clicked "Recover Drive" which opened up the filebrowser soI can select the current (wrong) firmware. I selected BU40N 1.00 as that is what is currently on the drive.
Recover-2.jpg
Recover-2.jpg (75.19 KiB) Viewed 19526 times

Step 3: I now select the firmware file to flash in the 2nd drop down box. As you can see, I selected BH16NS55 1.04 MK.
Recover-3.jpg
Recover-3.jpg (23.47 KiB) Viewed 19526 times

Step 4: Click START button to recover the drive. As you can see, my drive has been recovered and is now on BH16NS55 1.04 MK firmware.
Recover-4.jpg
Recover-4.jpg (23.37 KiB) Viewed 19526 times
Cheers :D
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG) & DIY Single Drive Flasher (WW): https://www.uhdenableddrives.com
Post Reply