It very well could be that I'm missing something, but from what I've read on these forums, my drive should be able to read a UHD disk because it is enabled for LibreDrive. Am I wrong? Do I still need to do some extra flashing to get this to work? I have two UHD disks that just give a status of "No disk" when I put it into MakeMKV v1.17.8.
Drive Information
OS device name: \Device\CdRom0
Current profile: BD-ROM
Manufacturer: PIONEER
Product: BD-RW BDR-208D
Revision: 1.10
Serial number: [redacted]
Firmware date: 2012-08-22
Bus encryption flags: 13
Highest AACS version: 64
LibreDrive Information
Status: Enabled
Drive platform: RS8301
Firmware name: PIONEER BDR-208
Firmware type: Original (unpatched)
Firmware version: 1.10/ID61
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes
Pioneer BDR-208D - "No disk" for UHD
Re: Pioneer BDR-208D - "No disk" for UHD
Read your PM.timjohnson408 wrote: ↑Fri Nov 15, 2024 1:37 pmIt very well could be that I'm missing something, but from what I've read on these forums, my drive should be able to read a UHD disk because it is enabled for LibreDrive. Am I wrong? Do I still need to do some extra flashing to get this to work? I have two UHD disks that just give a status of "No disk" when I put it into MakeMKV v1.17.8.
Drive Information
OS device name: \Device\CdRom0
Current profile: BD-ROM
Manufacturer: PIONEER
Product: BD-RW BDR-208D
Revision: 1.10
Serial number: [redacted]
Firmware date: 2012-08-22
Bus encryption flags: 13
Highest AACS version: 64
LibreDrive Information
Status: Enabled
Drive platform: RS8301
Firmware name: PIONEER BDR-208
Firmware type: Original (unpatched)
Firmware version: 1.10/ID61
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes
-
- Posts: 2875
- Joined: Wed Nov 22, 2017 11:45 pm
Re: Pioneer BDR-208D - "No disk" for UHD
Libredrive does not equal UHD compatibility!!timjohnson408 wrote: ↑Fri Nov 15, 2024 1:37 pmIt very well could be that I'm missing something, but from what I've read on these forums, my drive should be able to read a UHD disk because it is enabled for LibreDrive. Am I wrong? Do I still need to do some extra flashing to get this to work? I have two UHD disks that just give a status of "No disk" when I put it into MakeMKV v1.17.8.
Drive Information
OS device name: \Device\CdRom0
Current profile: BD-ROM
Manufacturer: PIONEER
Product: BD-RW BDR-208D
Revision: 1.10
Serial number: [redacted]
Firmware date: 2012-08-22
Bus encryption flags: 13
Highest AACS version: 64
LibreDrive Information
Status: Enabled
Drive platform: RS8301
Firmware name: PIONEER BDR-208
Firmware type: Original (unpatched)
Firmware version: 1.10/ID61
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes
Cheers
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG + Others) & DIY Single Drive Flasher (WW): https://uhdenableddrives.com
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG + Others) & DIY Single Drive Flasher (WW): https://uhdenableddrives.com
-
- Posts: 4
- Joined: Fri Nov 15, 2024 1:31 pm
Re: Pioneer BDR-208D - "No disk" for UHD
Are you sure you followed the instructions by the book? And no disc in drive and tray closed?timjohnson408 wrote: ↑Mon Nov 18, 2024 2:16 pmI went through the tutorial but am getting "Failed to enter kernel mode." I'm on a Windows 10 PC and tried running BDRFlash as admin and also tried rebooting.
Re: Pioneer BDR-208D - "No disk" for UHD
isn't that usually a problem with UHD?
Re: Pioneer BDR-208D - "No disk" for UHD
-
- Posts: 4
- Joined: Fri Nov 15, 2024 1:31 pm
Re: Pioneer BDR-208D - "No disk" for UHD
Calm down. Others did that before and called themselves the same. Until now I had no unsuccessful attempt in the end. Happy UHD ripping!timjohnson408 wrote: ↑Mon Nov 18, 2024 6:23 pmAhhhhhhI'm an idiot. I initially read your DM about removing the disk but forgot when I got around to actually flashing it.
-
- Posts: 4
- Joined: Fri Nov 15, 2024 1:31 pm