BH16NS55 Status: Possible, not yet enabled

Discussion of LibreDrive mode, compatible drives and firmwares
Post Reply
ted1019
Posts: 3
Joined: Tue Nov 22, 2022 8:26 am

BH16NS55 Status: Possible, not yet enabled

Post by ted1019 »

As long as I know, the Libredrive Information should look like this in order to downgrade my drive and rip 4k UHD blurays
mania-done-6351573bdbd7a5f519faa1047fbe654f.jpg
mania-done-6351573bdbd7a5f519faa1047fbe654f.jpg (40.57 KiB) Viewed 146 times
However, as you can see mine doesn't show all the information but only "Status: Possible, not yet enabled/Drive platform: MT1959"


Can I continue to downgrade this thing without risk of bricking it?
캡처.PNG
캡처.PNG (28.18 KiB) Viewed 146 times
MartyMcNuts
Posts: 1770
Joined: Wed Nov 22, 2017 11:45 pm

Re: BH16NS55 Status: Possible, not yet enabled

Post by MartyMcNuts »

ted1019 wrote:
Tue Nov 22, 2022 8:31 am
As long as I know, the Libredrive Information should look like this in order to downgrade my drive and rip 4k UHD blurays

mania-done-6351573bdbd7a5f519faa1047fbe654f.jpg

However, as you can see mine doesn't show all the information but only "Status: Possible, not yet enabled/Drive platform: MT1959"


Can I continue to downgrade this thing without risk of bricking it?

캡처.PNG
Yes, go ahead and flash it. WH16NS60 1.02-MK is the recommended firmware for your NS55.
Cheers :D
----------------------------------------------------------------------------------------------------------------------------------------
For UHD capable drives (AU/NZ) / DIY Single Drive Flasher (Worldwide): https://www.uhdenableddrives.com
ted1019
Posts: 3
Joined: Tue Nov 22, 2022 8:26 am

Re: BH16NS55 Status: Possible, not yet enabled

Post by ted1019 »

kay, thank you so much for confirming and literally terminating my anxiety :D
but one more thing i wanna confirm, the "WH16NS60 1.02-MK" you mentioned, means that I should downgrade my firmware "to" that one right? the current one I got is 1.05
plz understand me for asking these questions since I really don't want anything to go wrong
MartyMcNuts
Posts: 1770
Joined: Wed Nov 22, 2017 11:45 pm

Re: BH16NS55 Status: Possible, not yet enabled

Post by MartyMcNuts »

ted1019 wrote:
Tue Nov 22, 2022 8:57 am
kay, thank you so much for confirming and literally terminating my anxiety :D
but one more thing i wanna confirm, the "WH16NS60 1.02-MK" you mentioned, means that I should downgrade my firmware "to" that one right? the current one I got is 1.05
plz understand me for asking these questions since I really don't want anything to go wrong
Yes, using SDFtool Flasher, select your BH16NS55, select the WH16NS60 1.02-MK firmware and click START.
Cheers :D
----------------------------------------------------------------------------------------------------------------------------------------
For UHD capable drives (AU/NZ) / DIY Single Drive Flasher (Worldwide): https://www.uhdenableddrives.com
Post Reply