LG BP60NB10 Flashed with LibreDrive Firmware Still Not Recognized

Discussion of LibreDrive mode, compatible drives and firmwares
Post Reply
Captain_Cowtown
Posts: 2
Joined: Wed Aug 03, 2022 9:22 pm

LG BP60NB10 Flashed with LibreDrive Firmware Still Not Recognized

Post by Captain_Cowtown »

Greetings,

I recently flashed a LG BP60NB10 with the LibreDrive firmware list below and MakeMKV still doesn't recognize it as having the correct firmware. I used Terminal in MacOS to do the flash (a lot of trial and error to get it to work but it did show as flashed and have done it multiple times with the same result.) Should I use an older version of the firmware or attempt to flash it from a different computer (older MacOS or PC)?

Firmware:
HL-DT-ST-BD-RE_BP60NB10-1.02-NM00800-212005070935.bin

MakeMKV Notes After Firmware Flash:
Drive Information
Manufacturer: HL-DT-ST
Product: BD-RE BP60NB10
Revision: 1.02
Serial number: SIM03L56G4935
Firmware date: 2120-05-07 09:35
Bus encryption flags: 17
Highest AACS version: 76

LibreDrive Information
Status: Possible (with patched firmware)
Drive platform: MT1959
Harware support: Yes
Firmware support: No
Firmware type: Original (patched version available)
Firmware version: 1.02
DVD all regions: Possible (with patched firmware)
BD raw data read: Possible (with patched firmware)
BD raw metadata read: Possible (with patched firmware)
Unrestricted read speed: Possible (with patched firmware)

Thanks for the help!
Billycar11
Posts: 2575
Joined: Sun Aug 24, 2014 5:49 am

Re: LG BP60NB10 Flashed with LibreDrive Firmware Still Not Recognized

Post by Billycar11 »

You didn't flash it follow the guide.
Or get an automated flasher from me or Marty that will do all the right steps for you.
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
MartyMcNuts
Posts: 1720
Joined: Wed Nov 22, 2017 11:45 pm

Re: LG BP60NB10 Flashed with LibreDrive Firmware Still Not Recognized

Post by MartyMcNuts »

Captain_Cowtown wrote:
Wed Aug 03, 2022 9:33 pm
Greetings,

I recently flashed a LG BP60NB10 with the LibreDrive firmware list below and MakeMKV still doesn't recognize it as having the correct firmware. I used Terminal in MacOS to do the flash (a lot of trial and error to get it to work but it did show as flashed and have done it multiple times with the same result.) Should I use an older version of the firmware or attempt to flash it from a different computer (older MacOS or PC)?

Firmware:
HL-DT-ST-BD-RE_BP60NB10-1.02-NM00800-212005070935.bin

MakeMKV Notes After Firmware Flash:
Drive Information
Manufacturer: HL-DT-ST
Product: BD-RE BP60NB10
Revision: 1.02
Serial number: SIM03L56G4935
Firmware date: 2120-05-07 09:35
Bus encryption flags: 17
Highest AACS version: 76

LibreDrive Information
Status: Possible (with patched firmware)
Drive platform: MT1959
Harware support: Yes
Firmware support: No
Firmware type: Original (patched version available)
Firmware version: 1.02
DVD all regions: Possible (with patched firmware)
BD raw data read: Possible (with patched firmware)
BD raw metadata read: Possible (with patched firmware)
Unrestricted read speed: Possible (with patched firmware)

Thanks for the help!
make sure you use enc in your command as your drive comes with encrypted firmware.
Cheers :D
----------------------------------------------------------------------------------------------------------------------------------------
For UHD capable drives (AU/NZ) / DIY Single Drive Flasher (Worldwide): https://www.uhdenableddrives.com
Captain_Cowtown
Posts: 2
Joined: Wed Aug 03, 2022 9:22 pm

Re: LG BP60NB10 Flashed with LibreDrive Firmware Still Not Recognized

Post by Captain_Cowtown »

make sure you use enc in your command as your drive comes with encrypted firmware.
Hi, this did the trick!

Thank you so much!
MMKVQ
Posts: 1
Joined: Fri Aug 12, 2022 4:38 pm

Re: LG BP60NB10 Flashed with LibreDrive Firmware Still Not Recognized

Post by MMKVQ »

I have the same drive and I have tried every possible combination but still it doesnt flash it to MK firmware.

would you mind sharing your command line ? or setup ?

I'm on macos, I did it through the terminal, used enc in the commandline, the command reports success, but when recheck the firmware, it is does not change.

I used the firmware:
HL-DT-ST-BD-RE_BP60NB10-1.02-NM00800-212005070935.bin

I thought of trying HL-DT-ST-BD-RE_BP60NB10-NB12-1.02-N000300-212107081556.bin
but I couldnt find it.

any help is appreciated
Post Reply