Unable to read DVD for region code after flashed to MK Firmware

Discussion of LibreDrive mode, compatible drives and firmwares
Post Reply
soild79
Posts: 3
Joined: Sun Jul 03, 2022 8:26 am

Unable to read DVD for region code after flashed to MK Firmware

Post by soild79 »

Hi All

Need you advise on how to really flashed my Buffalo Slim Dvd External Drive to be region free.

I have used the SDFtool to flash and it's seem to completed successfully and from the MKV program it displayed DVD all region: Yes but i still can't read my DVD

Previous i have used the HL-DT-ST-BD-RE_BU40N-BN12-0M01001-211905141415 to flash.

.
Attachments
DVD Drive.png
DVD Drive.png (93.17 KiB) Viewed 4355 times
Billycar11
Posts: 4371
Joined: Sun Aug 24, 2014 5:49 am

Re: Unable to read DVD for region code after flashed to MK Firmware

Post by Billycar11 »

Try letting windows load the DVD first then open makemkv
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
soild79
Posts: 3
Joined: Sun Jul 03, 2022 8:26 am

Re: Unable to read DVD for region code after flashed to MK Firmware

Post by soild79 »

The disc is loaded on the windows side.
Still no luck, it is stuck at this scanning process and the drive went to idle state after some time.
Btw i also can't play the DVD using VLC but i have tried to use a trial DVD rip software that allow all region read and it seem fine.
This mean that my All Region is not really working or enable.
Attachments
Capture.PNG
Capture.PNG (26.6 KiB) Viewed 4325 times
Billycar11
Posts: 4371
Joined: Sun Aug 24, 2014 5:49 am

Re: Unable to read DVD for region code after flashed to MK Firmware

Post by Billycar11 »

soild79 wrote:
Thu Jul 07, 2022 2:01 pm
The disc is loaded on the windows side.
Still no luck, it is stuck at this scanning process and the drive went to idle state after some time.
Btw i also can't play the DVD using VLC but i have tried to use a trial DVD rip software that allow all region read and it seem fine.
This mean that my All Region is not really working or enable.
Try using both USB cables if your not already
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
soild79
Posts: 3
Joined: Sun Jul 03, 2022 8:26 am

Re: Unable to read DVD for region code after flashed to MK Firmware

Post by soild79 »

Does not seem to work also
Post Reply